Well, since the other questions/problems I had have been answered (Thanks all!!) now I have a new problem, thus, the new topic. I wrote the following elsewhere but just decided to make a new topic (and yes I HAVE searched for previous topics on this but nothing came up that seem related).

Anyhow, the big test came and I went through a big headtrip because the guitar worked great through the UX1 but the microphone didn't work at all so I thought the unit was broken. However, with a bit of searching I found out why the microphone didn't "work". It was that I had to go to the "Mixer View" and switch to "Mic" from "Instrument". (Apparently only one works at a time.) After reading the Line6 Forum I was able to find "Mixer View":

http://line6.com/support/message/170951#170951

Okay, so that is one "problem" out of the way. Another problem came up that the microphone was distorted and I couldn't get rid of the distortion. By accident I found that I had a distortion pedal left on from when I was messing with the guitar. Removed it and the mic works perfectly! (And it's very cool that all the amps/pedals/effects also work for the microphone!! )

Okay, two problems down one to go. And this was one I also feared would happen. RealBand doesn't recognize my interface! I've searched here and Line6 for answers but can't find any. (Yes, I'll go back and read more of the manual for my UX1 but I'm stressing again ) Frankly, I even REinstalled Reaper in the hopes THAT would work but it doesn't either. Okay, so what I have now is two working things. RealBand and UX1 it's just that they don't work TOGETHER so I can't record anything. What am I missing (besides brain cells?)

Have to say that I get lots of lights showing my interface is working just not able to record.

P.S. Just about to watch this:

http://line6.com/support/docs/DOC-2334

Last edited by rokq22; 03/14/12 09:35 AM.