-------------------------------------------
EDIT: THE INFORMATION BELOW PERTAINS TO THE
SCARLETT 2i4 NOT THE SCARLETT 2i2
I LEFT IT RATHER THAN DELETING IT BECAUSE
IT MAY BE USEFUL TO SOMEBODY WHO IS THINKING
OF BUYING THE 2i4, OR WHO ALREADY HAS IT AND
CAN'T ACCESS THE 2nd SET OF OUTPUTS IN RB
-------------------------------------------
Another thing to plug into the equation:
This device has one stereo input, and two stereo outputs , which makes a total of 6 jacks. RB sees them similar to the way it sees multiple MIDI ports. (each set of ins and outs can be assigned separately to tracks)
Things that can go wrong:
1) you aren't using an ASIO driver... (without ASIO, RB only sees one of the stereo in-out sets)
AUDIO SETUP USING MMENote that when using MME drivers, when you right click on a track to assign the tracks output , you only get one option:
AVAILABLE OUTPUTS USING MME DRIVER 2) Even if you are using an ASIO driver, in your audio driver setup you need to highlight BOTH sets of IO options, or they won't be enabled and show up in your list of output options
AUDIO SETUP USING ASIO After switching to ASIO and selecting both sets of ports, you will have an extra assignable audio output in your right click track menu:
AVAILABLE OUTPUTS USING ASIO DRIVER 3) even if everything else is setup right, you could still get your cables mixed up and have one cable attached to IO set A, while the other cable is attached to IO set B. In such a case, no combination of settings would ever give you a stereo out, because you can't assign both sets of outputs to the same track.
Hope this provides some help. Its a great little device, very useful if you need to route different tracks to different outputs.