Previous Thread
Index
Next Thread
Print Thread
Go To
Page 1 of 2 1 2
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Awhile back, I posted a thread about latency issues that I'm having with BIAB2014. In spite of patient and generous help from several on this forum, it was never completely resolved. In a nutshell, I experience slight but annoying latency using the MME driver. Switching to ASIO4ALL has not helped as I then get no sound from my MIDI keyboard thru BIAB at all. (Keyboard is a Yamaha DGX640). I've tried following the procedure outlined in PGMusic's Help video about Latency, but it hasn't helped. As a result, I have not used BIAB much at all.

Well, now I'm asking whether perhaps there's another (hopefully more reliable/foolproof) way to "skin the cat". Are there hardware options (the more reasonably priced, the better) that would resolve the latency issues I'm having? Perhaps something with it's own ASIO driver?

If so, I'd appreciate any specific links.

FWIW, my set-up is as follows: DGX-640 connects to Win7 laptop computer via USB. Laptop sound is output to Behringer Xenyx502 Mixer which outputs to either headphones or to M-Audio BX5 monitors.

It's also important to note that I use Pianoteq (separate and apart from BIAB) and there is no issue with latency (also using ASIO4ALL). So I definitely do NOT want any proposed hardware solution to compromise Pianoteq's presently excellent performance.

I know absolutely nothing about any possible hardware options, I'd appreciate any explanation on how/where in my set-up any such device be placed (ie - between piano and computer?; between computer and mixer?; etc.

My main goal is to reduce/eliminate latency when I use my keyboard with BIAB. A secondary goal (but not critical) is to improve the quality or even selection of overall sounds in the system. (Would that involve a hardware synth of some sort? And would that be a totally separate device?)

Any help with these questions would be greatly appreciated! Thanks.


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Since I use software synths and MIDI controllers with ASIO4ALL and BiaB on my laptop when travelling and very rarely have any issues with that, I'm thinking that the odd man out in your setup is the Pianoteq software.

So that is what I'd be investigating if I were you, maybe there are internal Settings inside the Pianoteq that need to be tweaked, or something like that.

To be positive that is the case, I'd temporarily invoke *other* MIDI software synths and test the latency with BB and those other synths with the setup, for if all the other software synths can be made to work without the latency issue, then the Pianoteq software would definitely be the place to investigate this.


--Mac

Band-in-a-Box for Windows
Joined: Feb 2001
Posts: 708
T
Journeyman
Offline
Journeyman
T
Joined: Feb 2001
Posts: 708
I gave up a long time ago trying to eliminate latency from my keyboard when using BIAB and a soft synth. My keyboard line out goes to the mixer in parallel with the line out from a MIDI sound module (currently a SD50) which is driven by BIAB, and another line out from the computer to the mixer for real tracks. This works perfectly with no MME/ASIO issues to worry about.

Tony

Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: Mac
Since I use software synths and MIDI controllers with ASIO4ALL and BiaB on my laptop when travelling and very rarely have any issues with that, I'm thinking that the odd man out in your setup is the Pianoteq software.

So that is what I'd be investigating if I were you, maybe there are internal Settings inside the Pianoteq that need to be tweaked, or something like that.

To be positive that is the case, I'd temporarily invoke *other* MIDI software synths and test the latency with BB and those other synths with the setup, for if all the other software synths can be made to work without the latency issue, then the Pianoteq software would definitely be the place to investigate this.


--Mac


Mac, I missing something about what you're suggesting. To clarify - Both BIAB and Pianoteq use ASIO4All. However, I DON'T run them at the same time. IOW, I'm running Pianoteq as a standalone, NOT as a VST plug-in, and not at the same time that I'm running BIAB. So, I don't see how Pianoteq would be interfering with BIAB in any way. (Maybe I'm missing something though....).

I don't particularly want to continue playing with settings inside BIAB. (As I mentioned earlier, I'm just tired of it....). But I'm willing to try to experiment with another MIDI software synth to verify your point, if that's still reasonable based upon what I just explained about how I'm using Pianoteq. What specific software synth would you suggest trying? - Is there one that's available as a free demo?

Thanks.


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
The Standalone version and the VSTi version are two different animals, man.

If you don't want to get into the inner workings of the Pianoteq VSTi and experiment, then you aren't likely to find joy there at all, don't know what else to say about that.


--Mac

Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: Tony Wright
I gave up a long time ago trying to eliminate latency from my keyboard when using BIAB and a soft synth. My keyboard line out goes to the mixer in parallel with the line out from a MIDI sound module (currently a SD50) which is driven by BIAB, and another line out from the computer to the mixer for real tracks. This works perfectly with no MME/ASIO issues to worry about.

Tony


Thanks for the response about your set-up, Tony. I'm not sure whether that type of set-up would work for me though.

If I understand your configuration correctly - your keyboard is not connected to your laptop at all? If that's the case, while it would work for mixing the BIAB output and keyboard output, I wouldn't be able to use Pianoteq (alone) without reconfiguring some cables. (Pianoteq requires that the MIDI controller is connected to the laptop.)

Thanks.


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Aug 2011
Posts: 1,827
S
Expert
Offline
Expert
S
Joined: Aug 2011
Posts: 1,827
Here's the ASIO DirectX you can try
ftp://ftp.steinberg.net/Download/Hardware/ASIO/


Register 32 bit
copy asiodxfd.dll file to C:\Windows\System32

goto C:\Windows\System32 click on cmd.exe

at prompt type RegSvr32 asiodxfd.dll
Restart


Register 64bit
copy asiodxfd.dll file to C:\Windows\SysWOW64

goto C:\Windows\SysWOW64 right click on cmd.exe run as admin

at prompt type RegSvr32 asiodxfd.dll
Restart

You can change Buffer size for delay, just click on it change, hit enter.


Band-in-a-Box for Windows
Joined: Aug 2011
Posts: 1,827
S
Expert
Offline
Expert
S
Joined: Aug 2011
Posts: 1,827
The A53E should have Realtek audio, you can try this Realtek ASIO Driver: Realtek_ASIO_driver_v1.0.0.1.zip
You can adjust latency with the RTASIOCP.exe, might have to right click Run as Admin in Win7 ?
In Audio Stetting choose ASIO > Realtek

Register 32 bit
copy RTHDASIO.dll & RTLCPL.exe file to C:\Windows\System32

goto C:\Windows\System32 click on cmd.exe

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart


Register 64bit
copy RTHDASIO.dll & RTLCPL.exe file to C:\Windows\SysWOW64

goto C:\Windows\SysWOW64 right click on cmd.exe run as admin

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart

Band-in-a-Box for Windows
Joined: Jul 2000
Posts: 6,080
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 6,080
I have a number of hardware synths, and most of them have a latency of about 4-6ms - which is for all practical purposes, none.

I believe the Ketron SD2 has the best reputation, but I don't have one so I can't confirm.

I have an array of a half dozen sound modules and a couple of hardware samplers.

A lot of people are going to software synths, and I think that is affecting the hardware market. But I don't think they are ready for me yet - too much latency, too much CPU usage, and that limits how many I can mix together. And when I do mix them, each seems to have a different degree of latency, so they don't work together.

If I were to buy one today, I'd check out the ketron and buy it from a place where I could return it if I didn't like it.

Notes


Bob "Notes" Norton smile Norton Music
https://www.nortonmusic.com

100% MIDI Super-Styles recorded by live, pro, studio musicians for a live groove
& Fake Disks for MIDI and/or RealTracks
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Hey Solidrock, Thanks for the reply.

Because you posted two different messages, I'm a little confused. A few questions before I try your suggestions:

1. You posted about 2 different files (a file from ftp.steinberg.net and the Realtek ASIO driver). Are you suggesting that I install BOTH, or try the "Steinberg" alone first, and then install the Realtek driver if the first one alone doesn't do the trick? Or only try them one at a time?

2. Will either of these negatively effect ASIO4All which I'm successfully using with Pianoteq (standalone)? Is it OK for a Win7 system to have all 3 files (the Steinberg file, the Realtek file, and ASIO4All) installed concurrently, or is this asking for trouble?

3. Can any of these files be uninstalled easily thru Windows Uninstall function, if need be?

If any of these are successful, I wouldn't need to looks for a hardware solution (and save me some $$$, which is always good).

Thanks!


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Thanks for the recommendation, Notes. I may give that a try after first trying some of the software solutions suggested by Solidrock.

I was hoping to read some useful customer reviews of the Ketron SD2 on Amazon, but there are only three and none are very enlightening unfortunately.

Thanks again.


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
I've used -- and loved the sounds -- of the Ketron SD2 since it came out.

Great little MIDI solution, don't let the small size and ease of operation fool you, that is a plus.

When using it out live, lots of other keyboardists ask me what I'm using for my piano sound.


--Mac

Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: Mac
I've used -- and loved the sounds -- of the Ketron SD2 since it came out.

Great little MIDI solution, don't let the small size and ease of operation fool you, that is a plus.

When using it out live, lots of other keyboardists ask me what I'm using for my piano sound.


--Mac


Hmmm...Excellent sound, Ease of Operation....An endorsement from you certainly trumps any Amazon Customer Reviews, Mac. Something to consider....

Thanks!


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Dec 2003
Posts: 20,638
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 20,638
Originally Posted By: newbert
Originally Posted By: Mac
I've used -- and loved the sounds -- of the Ketron SD2 since it came out.

Great little MIDI solution, don't let the small size and ease of operation fool you, that is a plus.

When using it out live, lots of other keyboardists ask me what I'm using for my piano sound.


--Mac


Hmmm...Excellent sound, Ease of Operation....An endorsement from you certainly trumps any Amazon Customer Reviews, Mac. Something to consider....

Thanks!


A friend of mine has the SD-2 and IMHO it is by far the best sounding GM sound set that I have ever heard. Plus there are extra banks with it that also sound excellent!


Me, it's not about how many times you fail, it's about how many times you get back up.
Cop, that's not how field sobriety tests work.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: solidrock
The A53E should have Realtek audio, you can try this Realtek ASIO Driver: Realtek_ASIO_driver_v1.0.0.1.zip
You can adjust latency with the RTASIOCP.exe, might have to right click Run as Admin in Win7 ?
In Audio Stetting choose ASIO > Realtek

Register 32 bit
copy RTHDASIO.dll file to C:\Windows\System32

goto C:\Windows\System32 click on cmd.exe

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart


Register 64bit
copy RTHDASIO.dll file to C:\Windows\SysWOW64

goto C:\Windows\SysWOW64 right click on cmd.exe run as admin

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart


Solidrock - I did manual installations of both the DirectX ASIO DLL and the Realtek Audio DLL. Latency is about the same (but I do get sounds now when I hit the keys on my keyboard), and there are two other issues:

1.) I get a message that says: "The currently installed soundcard driver does not support Direct Sound Input. Audio Recording is not possible." when I'm in the MIDI/Audio settings dialog in BIAB.

This is confirmed in the Windows Sound settings which indicates that there is no recording device installed. (It shows "No audio devices installed" under "Record"). It has always been this way with this laptop. Am I missing some kind of sound input driver?

2. In terms of adjusting the latency using the "RTASIOCP.exe" file - Exactly where should that file be installed? When I highlight Realtek ASIO, then click on "ASIO Driver Control" in BIAB, I either get nothing popping up or a yellow "Error" box. I think that's because this "RTASIOCP.exe" file isn't where it should be.

Can you (or anyone) provide any insights to these questions?

Thanks!


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: newbert
Originally Posted By: solidrock
The A53E should have Realtek audio, you can try this Realtek ASIO Driver: Realtek_ASIO_driver_v1.0.0.1.zip
You can adjust latency with the RTASIOCP.exe, might have to right click Run as Admin in Win7 ?
In Audio Stetting choose ASIO > Realtek

Register 32 bit
copy RTHDASIO.dll file to C:\Windows\System32

goto C:\Windows\System32 click on cmd.exe

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart


Register 64bit
copy RTHDASIO.dll file to C:\Windows\SysWOW64

goto C:\Windows\SysWOW64 right click on cmd.exe run as admin

at prompt type RegSvr32 RTHDASIO.dll

to un-register RegSvr32 /U RTHDASIO.dll

Restart


Solidrock - I did manual installations of both the DirectX ASIO DLL and the Realtek Audio DLL. Latency is about the same (but I do get sounds now when I hit the keys on my keyboard), and there are two other issues:

1.) I get a message that says: "The currently installed soundcard driver does not support Direct Sound Input. Audio Recording is not possible." when I'm in the MIDI/Audio settings dialog in BIAB.

This is confirmed in the Windows Sound settings which indicates that there is no recording device installed. (It shows "No audio devices installed" under "Record"). It has always been this way with this laptop. Am I missing some kind of sound input driver?

2. In terms of adjusting the latency using the "RTASIOCP.exe" file - Exactly where should that file be installed? When I highlight Realtek ASIO, then click on "ASIO Driver Control" in BIAB, I either get nothing popping up or a yellow "Error" box. I think that's because this "RTASIOCP.exe" file isn't where it should be.

Can you (or anyone) provide any insights to these questions?

Thanks!


LATENCY SUCCESS AT LAST!!!!

I don't know what happened, but in the time it took for me to write the above post the latency went away! I've closed/re-started BIAB since then, then did the same with the laptop and the latency is now just fine! I hope it continues to be the case. If so, question #2 above is moot. smile

However, I still can't record (Question #1), so could still use some help with that.

Thanks!


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Aug 2011
Posts: 10,099
Veteran
Offline
Veteran
Joined: Aug 2011
Posts: 10,099
Vista, Win7 and Win 8 operating systems disable the "record what you hear" or "stereo mix" feature but it's pretty easy to enable the feature.

Right click on the speaker icon near the system clock to open up a sub menu and select the "Recording devices" option.

Once the Recording devices window opens, right click in a blank area where there is no writing to open another sub menu.

Put checkmarks to enable "Show Disabled Devices" and "Show Disconnected Devices"

Back in the Recording devices window, right click on the stereo mix option and enable the option.


Jim Fogle - 2024 BiaB (1109) RB (Build 3) Ultra+ PAK
Cakewalk - Zoom MRS-8 recorder
Desktop: i7 Win 10 build 2004, 12GB ram 256GB SSD, 4 TB HDD
Laptop: i3 64bit Win 10 build 21H2, 8GB ram 500GB HDD
Music at: https://fogle622.wix.com/fogle622-audio-home
Band-in-a-Box for Windows
Joined: Dec 2011
Posts: 273
N
newbert Offline OP
Apprentice
OP Offline
Apprentice
N
Joined: Dec 2011
Posts: 273
Originally Posted By: JimFogle
Vista, Win7 and Win 8 operating systems disable the "record what you hear" or "stereo mix" feature but it's pretty easy to enable the feature.

Right click on the speaker icon near the system clock to open up a sub menu and select the "Recording devices" option.

Once the Recording devices window opens, right click in a blank area where there is no writing to open another sub menu.

Put checkmarks to enable "Show Disabled Devices" and "Show Disconnected Devices"

Back in the Recording devices window, right click on the stereo mix option and enable the option.


Interesting.....Why on earth would this be disabled by default (and so unintuitive to activate)?

This worked exactly as you described, Jim. Thanks! smile


Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Band-in-a-Box for Windows
Joined: Aug 2011
Posts: 1,827
S
Expert
Offline
Expert
S
Joined: Aug 2011
Posts: 1,827
Copy RTLCPL.exe to the same location as RTHDASIO.dll that should give you the Realtek ASIO Control Panel from the audio settings.

Band-in-a-Box for Windows
Joined: Jun 2005
Posts: 7,687
Veteran
Offline
Veteran
Joined: Jun 2005
Posts: 7,687
Newbert, I've said this so many times and I'm laughing right now. Been there, done that. It's a good thing I still have thick hair or I'd be bald by now from all the hair pulling over this stuff.

You have to turn yourself into a computer nerd to work with digital audio. Just the way it is because we're maybe 3% of the market so nobody cares about us except us. This is all easily dismissed with the old farts wave of the hand while mumbling "it's hacker crap". Yes it is and don't worry about the why's or any of that just take notes and learn it.

Bob


Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
Previous Thread
Next Thread
Go To
Page 1 of 2 1 2

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®

New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!

This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!

When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.

Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video

The new Band-in-a-Box VST DAW Plugin Verion 6 adds over 20 new features!

Watch the new features video to learn more: Video: Band-in-a-Box® 2024 - DAW Plugin Version 6 New Features

We also list these new features at www.pgmusic.com/bbwin.plugin.htm.

Forum Statistics
Forums66
Topics81,394
Posts732,478
Members38,441
Most Online2,537
Jan 19th, 2020
Newest Members
zagrajbarke, Ernest J, Izzy, BenChaz, Csofi
38,440 Registered Users
Top Posters(30 Days)
MarioD 195
Al-David 124
DC Ron 113
dcuny 87
rsdean 83
Today's Birthdays
CeeDee, SethMould
Powered by UBB.threads™ PHP Forum Software 7.7.5