Previous Thread
Index
Next Thread
Print Thread
Go To
#288678 03/20/15 05:47 AM
Recording, Mixing, Performance and Production
Joined: Aug 2010
Posts: 2,254
Veteran
OP Offline
Veteran
Joined: Aug 2010
Posts: 2,254
I personally love all styles of music. Right now though, I am working at getting an industry processed type of sound. I am trying to focus on this and need help.

Here is an example of what I am reaching for...

Toms and Hihat

I like the fullness of the toms. I currently have slate drums to play with, and am curious what kinds of effects, eq, chain, (and rough settings), etc, do I need to be using to head in this direction?

Next would be the hi hat and ride. The hi hat has a nice slushy sound, not so mechanically tight sounding. Yet, it sits in the mix very nicely. The ride has a clear pretty sound to it (especially with the accents).

How? That is my question smile I really don't know where to start or what to change. If I put reverb on, I don't know what to roll off or enhance, as an example. I am at a total loss with all of this, but am excited to learn.

I would like to start by perfecting one type of sound that I can use. Then I can work from there.

I am really looking forward to the responses! I am also hoping to avoid the whole "I detest Luke Bryan / That's not country music" debate smile I'm just looking to try and better myself and my writing in a direction I would personally like to go.

Thanks! smile


Chad (Hope that makes it easier)

TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Recording, Mixing, Performance and Production
Joined: Apr 2009
Posts: 9,301
Veteran
Offline
Veteran
Joined: Apr 2009
Posts: 9,301
It all depends... on lots of things.

First, there's no easy, simple answer to this, such as ... do this and waaaa laaaa......and especially in a single post in a forum thread. But this is my 2 cents worth in the first post.....

I find it easier to work in Sonar on my final mixing. This lets me add and delete the compressors and EQ and reverbs that I need to use on tracks.

I find that some of the Real Drum tracks in BB/RB can be "seasoned" nicely using a few plugs that I have customized inside my DAW.

I don't have Slate... but I do have a few other drum synths and several of them allow multiple, assignable, track outputs. Having each part of the kit in it's own track or even being able to group things such as "toms" into one output channel and "cymbals" into another tend to make tweeking the kit to perfection much much easier than say using a Real Band real drum track where everything in the kit is on one stereo track.

I tend to be lazy and not really as nitpicking when it comes to drums so I opt for the easy path of whatever real band can deliver in most cases.

The best way to learn how to get that "BIG KIT" sound is to play around with the drums in SOLO mode and do that in a DAW that allows easy insert and removal of plugs. Be sure the speakers are capable of letting you hear what's going on with the mix. Then it's a matter of playing around with the compressors, EQ's that you have in your tool box. and the reverb. Since drums in a kit tend to span the entire frequency range from the low freq thump of the kick to the high end of the cymbals, using a multi-band compressor is real handy for the compression.... you don't necessarily want to compress the cymbals at the same rate as the kick.... multiband's let you control the freq bands separately. Same with EQ... if everything is ion one track, use a multi-band point EQ... similar to a graphic. Para-Q works fine on individual drums, but using them on the whole kit is a bit of a stretch IMHO.

Don't overcompress the drums. Perhaps the kick needs heavier compression than the rest, but avoid too much compression or you suck the life and dynamics out of the kit.

If you're new to mixing and need a good place to start, download this and keep it on your computer after you read it.

https://www.izotope.com/en/support/support-resources/guides/

Get the first 2 guides. Mixing & mastering

It's specific to the products they sell BUT.... great information that crosses the lines to ALL mixing and mastering.

Ask specific questions as you begin to understand more.


You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.
Recording, Mixing, Performance and Production
Joined: Aug 2011
Posts: 10,099
Veteran
Offline
Veteran
Joined: Aug 2011
Posts: 10,099
A video link from another posting had an interesting idea that I've played with and like.

Start with a two channel (stereo) drum track such as a RealDrums track.

Duplicate the drum track three times. Each of the three tracks will emphasise one drum instrument such as kick, snare, high-hat or cymbal by concentrating on the sound of that one instrument. Then the original track and the three emphasised tracks can be mixed together to create the sound you want. You can also add an effect like reverb or delay to change the sound of one drum instrument if desired.

Mute all tracks but one. Play the unmuted track through a parametric equaliser. Set the parametric equaliser for high q (very narrow bandwidth) then raise the gain. Change the frequency around until you find the center frequency of one instrument such as the kick drum. Use high and low cut filters to get rid of the frequencies outside the range of the instrument. Add gain and effect to get that instrument (kick drum in my description) to sound like you want it.

Repeat with tracks two (snare perhaps) and three (cymbals maybe).

If the original drum track has more instruments like conga, toms or cowbell (gotta' have that cowbell) then you can add more duplicate tracks to concentrate on each instrument as desired.

You need to make sure unwanted frequencies are minimzed in each duplicate track or the sound quickly turns muddy or indistinct.

Duplicate tracks opens up a lot of mixing options. You can change the emphasis each verse by altering the sub mix. You can apply effects to one instument.


Jim Fogle - 2024 BiaB (1109) RB (Build 3) Ultra+ PAK
Cakewalk - Zoom MRS-8 recorder
Desktop: i7 Win 10 build 2004, 12GB ram 256GB SSD, 4 TB HDD
Laptop: i3 64bit Win 10 build 21H2, 8GB ram 500GB HDD
Music at: https://fogle622.wix.com/fogle622-audio-home
Recording, Mixing, Performance and Production
Joined: Aug 2010
Posts: 2,254
Veteran
OP Offline
Veteran
Joined: Aug 2010
Posts: 2,254
Thanks for the responses. I do understand the need to separate out the tracks for processing (unless working with loops of course).

The problem I'm having is I really have NO idea what effects will get me closer to the sound I'm looking for. I don't know how to NOT muddy up a mix, or make something stand out.

Is my best bet to just start with something, post it, and get advice on that?


Chad (Hope that makes it easier)

TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Recording, Mixing, Performance and Production
Joined: Aug 2010
Posts: 2,254
Veteran
OP Offline
Veteran
Joined: Aug 2010
Posts: 2,254
Quote:
Mute all tracks but one. Play the unmuted track through a parametric equaliser. Set the parametric equaliser for high q (very narrow bandwidth) then raise the gain. Change the frequency around until you find the center frequency of one instrument such as the kick drum. Use high and low cut filters to get rid of the frequencies outside the range of the instrument. Add gain and effect to get that instrument (kick drum in my description) to sound like you want it.

Repeat with tracks two (snare perhaps) and three (cymbals maybe).

If the original drum track has more instruments like conga, toms or cowbell (gotta' have that cowbell) then you can add more duplicate tracks to concentrate on each instrument as desired.

You need to make sure unwanted frequencies are minimzed in each duplicate track or the sound quickly turns muddy or indistinct.


This says A LOT. Thanks! So this is where muddy-ness happens?

This will sound stupid, but it's where I'm at, how do you do this with effects? I'm guessing that is also where the mud comes from?


Chad (Hope that makes it easier)

TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Recording, Mixing, Performance and Production
Joined: Aug 2010
Posts: 2,254
Veteran
OP Offline
Veteran
Joined: Aug 2010
Posts: 2,254
In the track I offered as an example, to me it sounds like there is a lot of compression going on. But here is the thing, I don't KNOW that. I think that's what it is, but really have no clue. I'm excited to find out though!


Chad (Hope that makes it easier)

TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Recording, Mixing, Performance and Production
Joined: Dec 2003
Posts: 20,638
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 20,638
These sites should help:

http://www.deepscoperecords.com/deepscopeweb_022.htm

http://www.audio-issues.com/music-mixing/drum-eq-guide/

http://www.prosoundweb.com/article/eq_and_compression_techniques_pt2_drums/

There is a lot of information on EQing drums, just google/bing EQ for drums. The best way is to these is to put each drum and cymbal on separate tracks.

What DAW are you using? Many come with excellent tools that you can use.

As previously mentioned each song may be EQed differently so you have to use the old trial and error method to find the best sounding drums for each song.


Me, it's not about how many times you fail, it's about how many times you get back up.
Cop, that's not how field sobriety tests work.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Recording, Mixing, Performance and Production
Joined: Apr 2009
Posts: 9,301
Veteran
Offline
Veteran
Joined: Apr 2009
Posts: 9,301
Quote:
The problem I'm having is I really have NO idea what effects will get me closer to the sound I'm looking for. I don't know how to NOT muddy up a mix, or make something stand out.



There are 3 main EQ's that are used for the majority of the music you hear.

1. Compression
2. EQ
3. Reverb

Those 3 are the primary ones that you should learn to use.

A fourth, the Limiter, can also be used to advantage in some places. However, if you learn the 3, you can do almost everything you need with them.

Personally, I go light on compression, use EQ judiciously, reverb as needed and rarely use a limiter. Your tracks, straight up raw, should be fairly close to the sound you want before you apply any FX to them. If they are not, you should re-examine what you're doing in the recording process, so that they are closer to the desired end result, up front.

The muddiness in a mix comes from having too many things in the same frequency range and that range tends to be the lower mids into the low range. EQ is your friend here. Using high pass filtering can solve lots of problems in this range.

Last edited by Guitarhacker; 03/22/15 02:18 AM.

You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.
Recording, Mixing, Performance and Production
Joined: May 2008
Posts: 5,063
Veteran
Offline
Veteran
Joined: May 2008
Posts: 5,063
Lots of great advice on here so far and here's a couple of links to help as well.

https://www.youtube.com/watch?v=idVWobNeGtU Lots of great mixing tutorial videos from Recording Revolution on youtube or go to http://www.recordingrevolution.com You can see and hear what he's doing as he explains how to do it. Then try it in whatever DAW and effects you are using.

Also Coursera has a FREE music production course from Berklee which covers all the basics.

Hope that helps

Josie

Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 13,978
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 13,978
And, if it hasn't been mentioned, use a reference song for comparison as you work along, i.e., one that has the drum sound you wish to emulate.

Recording, Mixing, Performance and Production
Joined: Aug 2010
Posts: 2,254
Veteran
OP Offline
Veteran
Joined: Aug 2010
Posts: 2,254
Quote:
And, if it hasn't been mentioned, use a reference song for comparison as you work along, i.e., one that has the drum sound you wish to emulate.


Agreed. It's the only way to know that I am so far away from the sound I want...not close! Ha! J/k GREAT advice!


Chad (Hope that makes it easier)

TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Recording, Mixing, Performance and Production
Joined: Jun 2005
Posts: 7,687
Veteran
Offline
Veteran
Joined: Jun 2005
Posts: 7,687
This hasn't been mentioned so I'll ask. What's the source recording of the drum track you're working with? I'm mostly used to me doing a live recording of a live drummer so then the mic's and placement are critical and I can go on and on about that but if you're working with prerecorded drums of any sort including midi drums using a synth, then that's a whole other thing.

With a prerecorded track and that can be audio loops, Real Drums or samples in a synth, try something simple like plugging in a basic 10 band EQ as in PG Music's 10 band EQ and use that to isolate the different parts of the kit. Cymbals are hiding around 5-8K, the kick is around 100-500K or so, the snare is in the middle and so on. If it's muddy lower those low freq's a bit. How much is a bit? Who knows, just experiment until you find out. EQ alone can get you a long way.

Lots of folks here have expensive DAWS like Sonar or Pro Tools and use expensive third party plugins like OZONE, T-Racks etc but don't overlook the PGM audio plugs. They were written by some of the same software sound designers who worked on those expensive mixing suites. The PG plugs have a bland appearance, no cool Starship Enterprise lightshow but behind those visuals lies the exact same software and the PG stuff can produce very good results.

Bob


Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®

New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!

This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!

When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.

Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video

The new Band-in-a-Box VST DAW Plugin Verion 6 adds over 20 new features!

Watch the new features video to learn more: Video: Band-in-a-Box® 2024 - DAW Plugin Version 6 New Features

We also list these new features at www.pgmusic.com/bbwin.plugin.htm.

Forum Statistics
Forums66
Topics81,396
Posts732,506
Members38,442
Most Online2,537
Jan 19th, 2020
Newest Members
Mark Morgan, zagrajbarke, Ernest J, Izzy, BenChaz
38,441 Registered Users
Top Posters(30 Days)
MarioD 195
Al-David 124
DC Ron 116
dcuny 87
rsdean 84
Today's Birthdays
CeeDee, SethMould
Powered by UBB.threads™ PHP Forum Software 7.7.5