Has anyone had a chance to try out the USB MIDI Breath Controller? I've been looking for an affordable breath controller for some time, and this looks like it would fit the bill nicely. It's half the price of the the MRT Controller, which seems to be the only other product on the market.
Specifically, I'm curious how well it works with JABB. I know that you really should be using it with something like physical modeling, but I've only got so much money to spend.
I've read that JABB is designed to work with wind controllers, but have also read that it's not exactly stellar in that department.
Bob Norton and Matt Finley may have some thoughts for you. They helped me out mightily when I was buying a MIDI wind system for my wife. Bob's site includes general information on wind controllers, too.
In addition to what answers you get here, you might talk to Matt at Patchman Music, a wind controller specialist. He will probably want to sell you something better--it's what he does--but there's no harm in asking. His FAQs page has a wealth of information, too.
HTH,
Richard
"My primary musical instrument is the personal computer."
I have one and I am very happy with it. It can be programmed to send any MIDI CC on any channel, so it will work with pretty much any software that accepts MIDI CC messages.
I learned about it on the Sound On Sound forum (below), there are a couple of detailed reviews there. Hope it helps.
I use an Akai EWI-USB wind controller but I did look up the specs on this unit. It will work very well with JABB. This will send one CC# at a time however with multi-takes you can send a different CC# on each pass. Thus you can get more realistic sounds on JABB. That plus the facts that you can either write and/or correct things in your DAW will take you a long way in obtaining more realistic sounds.
Good luck.
Me, it's not about how many times you fail, it's about how many times you get back up. Cop, that's not how field sobriety tests work.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thanks for the info! I think a wind controller is beyond my skill set for a while, but this controller is going to the top of my "fun stuff to get" list.
I have/use the older Yamaha BC3 (like you I'm not a wind/horn player - hard enough to just play guitar and hack around on keys). Since none of my current synths/rack modules have a dedicated breath input jack any longer, I use a MIDI Solutions Breath Controller and feed it (MIDI merge it) into the MIDI stream via the my first MIDI mixer (I run two JL Cooper MSB Rev 2's) that then feeds all synths (including the PC) that are "down stream." I can apply breath control to ANY synth sound source I own.
If I didn't already have the BC3 I'd probably buy this one (expect not sure I'd relish idea of having to HAVE a PC (laptop, net book, whatever) running just to apply breath to an external synth, but that's just me!
Good Luck Larry
Last edited by Larry Kehl; 11/24/1310:23 AM.
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
I can't imagine ever using the breath controller outside the context of my desktop environment, so performance isn't an issue for me.
I found a free VST called midiAudioToCC which translates volume into MIDI CC commands. Basically, something that could be used as a poor man's breath controller.
But... I tried it out with JABB and GPO, but the results weren't very encouraging - there was too much variation in volume - the flute ended up sounding more like a harmonica because of rapid oscillations in volume. I should play around with the smoothing and see if I can get better results.
Also, humming would probably work better than blowing into the mike. On the other hand, it seems to work fine for the iOS apps...
If I didn't already have the BC3 I'd probably buy this one (expect not sure I'd relish idea of having to HAVE a PC (laptop, net book, whatever) running just to apply breath to an external synth, but that's just me!
A new BC with MIDI OUT is now available according to KVR. This one should plug straight into any synthesizer I think, eliminating the need for conversion boxes, PCs, etc.
TIP: Many of the Yamaha Keyboards came at one time with a Breath Controller input on them.
Usually located on the front, below the keyboard, easy to spot in the used instrument stores, thrift shops, garage sales, etc. - and often can be purchased for pennies on the dollar.
An upside is that those keyboards were built like tanks and generally speaking, all functions still work.
Most were purchased by folks who never really used 'em much, never took them out on gigs, virtually near brand new except for that layer of dust from sitting when the interest soon waned.
Since the Street Price of devices such as the MIDI Solutions Breath Controller box is around the $200 mark, sans mouthpiece device, which will add even more to the purchase price, but these older 61-key Yamaha keyboards can be found and purchased for as little as $20 used (!) it can represent a very viable option and does not require a PC. Overdubbing BC data works pretty much the same, too, if that is the goal.
The actual Yamaha Breath Control mouthpiece and associated hookup is typically not included as many of these keyboards were offered w/o it, the BC being sold as an accessory.
"BC2" can be used with any of the Yamaha stuff that has a BC input.
GOOD suggestion (for someone with a BC but no unit to use it on/with) or for someone who can still get a BC unit.
My situation/solution was just by way of explaining how I applied my BC to one, many, or no synths at all (overkill and actually wasteful for 99% of folks, but I have the equipment anyway for other reasons).
I would NEVER advise anyone to go out build my $$$ solution.
I bought the BC when I had a Motif ES (now have XS which does NOT have BC in) but still bought the MIDI Solutions even though I had the ES (but I did not pay anywhere close to retail for it - more like used for around $60) because I like being able to control all MIDI devies (including PC) via a MIDI mixer/patch bay (I am a control freak). Besides plugging the BC into the ES only allowed me to apply breath to units down stream not up stream, I have many other units upstream of ES (now XS) in my config. so I opted for the approach I now use.
Larry
PS Happy Thanksgiving to all my fellow Yanks out here (and good wishs to all those who aren't Yanks)!
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
First of all from the video demo that I remember of the TEC controller, it seems far better than anything in its class to use with a keyboard. The fact that it has a USB interface makes it far superior to any similar BC device which works only with specific keyboard models or hardware devices. The USB interface means it will hook to any computer, therefore any synth that works with the computer should be able to talk with the TEC BC controller -although that does not guarantee full compatibility, but is an absolute requirement. Thus the TEC is far more resistant to obsolescence.
Anyone who has not seen the TEC video demo should look and listen here:
Second, as far as JABB and Breath (BC) and Windcontrollers are concerned, I don't think they really designed it to make good use of these devices. If they did, they mostly failed. There is no explicit setting in the Aria Engine for BC or Windcontrollers. Whoever told you so is wrong, but you don't have to take my word for it, just look at the Aria screen menus.
Only Samplemodeling has the following settings:
Keyboard Breath Controller (BC) Windcontroller
Not only do they go out of their way to work with these devices, but the quality of their sounds is incredibly good. I also feel that the overall responsiveness (including latencyh) is the best I have ever tried. Now I'm speaking of Windcontrollers, specifically EWI's but the Breath controller, which I have not tried, surely is very similar.
Samplemodeling uses Kontakt Player for Brass and the their own SWAM (engine) player for Sax, Clarinet, Oboe, and English Horn. Both engines have specific menus for keyboard, BC or Windcontroller.
Not only do they go out of their way to work with these devices, but the quality of their sounds is incredibly good. I also feel that the overall responsiveness (including latencyh) is the best I have ever tried.
Yes, I agree completely with your experience. I don't think there is anything better on the market for woodwind/brass instruments.
I've heard great things about samplemodeling. Thanks!
Yes, it is really great as you can hear in this video.
Quite impressive. In the hands (and mouth) of the skilled player, this would fool most. I looked away while he was playing the tenor sax, and to my ear, I would be fooled - particularly if this would have been less 'naked' with a piano player, drummer and bass player along for the ride.
I still have my BC-2, which I use with my Yamaha CS6X keyboard...a very nice and rugged 'dance-oriented' keyboard with sampling. Wish the TEC wasn't so expensive...oh, well!
I noticed that Hello music has the EWI 4000S for under $500. Not being a woodwind player, I don't know if this is a good deal or not. Hello Music's pricing sometimes seems fantastic, at other times not so great. Here's a link - says "sign in for member pricing" - so maybe there's a bit of a price break there.
They don't exactly give it away, but it is way cheaper than any other alternatives. Consider that just the Midi solutions converter box costs $200 and then you still need to find a used BC3, which goes on ebay for more than $300...
Has anyone had a chance to try out the USB MIDI Breath Controller? I've been looking for an affordable breath controller for some time, and this looks like it would fit the bill nicely. It's half the price of the the MRT Controller, which seems to be the only other product on the market.
A new breath controller from Germany is now available
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.