The question of sheen/gloss/polish/air/sparkle came up in Kevin's thread, and I figured I might have a go at it here. Assume that you've got a process like this:
Arrange -> Record -> Mix -> Master -> MAGIC!
Arrange: create a musical setting that highlights the ideas of the song.
Record: capture a clean and accurate recording. In pre-digital days, this meant getting a high enough signal-to-noise ratio. Post digital, it means recording without clipping, so the tracks can later be mixed without adding artifacts.
Mix: Adjust the tracks so each part is clear, relative to their importance, and will play back well on a variety of devices. What needs to be heard, and what is important changes over the course of the song. Ways of achieving this can involve something as simple as adjusting the volume to adding complex effects chains.
Master: Adjust the EQ, compression and reverb so the songs sound like the belong together, preferably by using expensive analog gear too expensive for hobbyists.
I assume that the process of mastering goes something like:
Listen to it with ears and a brain that's had years of experience.
Perform focused multi-band EQ adjustments.
Add final compression and reverb to unify the songs.
So there's a lot going on in mastering. But for the purpose of this thread, the question is: what is sheen, and where does it come from?
Janice and Bud are correct in saying complete lack of mud, and IMHO that is probably the most difficult thing to achieve!! Well I find it difficult anyway . The above link may help, I've just read it and linked to it myself for future reference.
When done properly, the mastering is the final stage. We could argue of the exact Webster's definition of "mastering" for days...whether it can be done to a single song or if it refers to a group of songs..... but essentially it means to finish the process of recording and mixing. EQ, reverb, and compression tend to be the foundation of any good mastering job.
There's no "magic" in the process or after the process but the process when done correctly is "magical".
The sheen, the sparkly, the air will all be there as will the thump, richness and fatness. When I refer to mastering an individual song, I speak of it as small "m" mastering. And, if you recall many of my conversation posts on this, I don't use the word "mastering" very often when referring to this process. I use "polish" as the word.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Ya know, I think I was using the term "sheen" incorrectly -- it looks like it is actually a "technical" term in mixing -- a high-end "sheen". I guess my thoughts on that JB song I posted over in the other thread had to do with the unmistakable "presence" that the song had (which, unfortunately, you can't really hear in the youtube video as well as I hear it on the wav file).
Now that I cleared that up with another wishy-washy word (ha, ha), I think you get that from great songs, tight arrangements, excellent players, excellent equipment, excellent room, great mixing and great mastering. I don't think there is one magic bullet -- but great mixing and mastering can probably bring out the best qualities of what happened during recording.
Plus I think the analog recording of JB's early albums contributed to that also.
Interesting thing popped in my inbox this morning.
Originally Posted By: Graham_recordingrevoultion
I had a “formula” for making records but it was completely backwards. It went something like this: Quick Recording + Long (i.e. Complicated) Mixing = Sonic Success I would literally record as swiftly as possible. Not wanting to “kill the vibe” I would pick a mic placement and go. ... Then when it came time to mix, I would brew some coffee and prepare to dig in for many hours. Mixing (in my mind) was where the song came to life, and I was determined to give it all the time it needed to really shine.
His new process:
Originally Posted By: Graham_recordingrevoultion
... But one day I was watching some interview with some famous mixer and he had opened up a Pro Tools session of one of his mixes. He bypassed all the plugins so we could hear the raw, naked tracks. My jaw dropped. These tracks sounded amazing without any plugins! In fact, they didn’t sound much different than the final mix. .... These days I have a very similar (yet completely different) formula. It looks something like this: Slow, Intentional Recording + Quick, Big Picture Mixing = Sonic Success Do you see the change?
IMO reverb is a last resort in Mastering .. usually you are trying to re-reverb a song with reverb in the mix .. so 'unifying the songs' can be problematic this way. Also, IMO, when I hear 'sheen', 'sparkle' and 'air' I think of the two aspects pointed out below as concerns how it relates to mastering, along with a clean mix (as mentioned above; no mud!). Used prudently they add life to cymbals, vocals, guitars (especially acoustic) and the mix in general. They help things sound more 'live' as opposed to a narrowed bandwidth recording.
/ducking before the puritan firing squad starts
Make your sound your own! .. I do not work here, but the benefits are still awesome
I guess the question I was trying to ask what specifically is sheen. I ran across this in a Sound on Sound article which aaid:
Originally Posted By: Sound on Sound
Prior to mastering, you might be surprised at just how ordinary some mixes sound. Mastering often involves nothing more than compression, limiting and equalisation, but it has a disproportionate effect because of the quality of the equipment being used and the expertise of the person using it.
...
One popular mastering technique is to apply an overall boost of just one or two dBs at around 15kHz with a wide bandwidth setting. This is what people mean when they talk about 'air EQ', 'sheen' or 'gloss'.
So although people use this term in various ways, in the audio mastering sense, this seems to refer to a brightness the mix has, often achieved by correctly applying an EQ boost.
I've always took it to mean this. Probably not done with only EQ boost though. Sheen, Gloss and Air, to me, imply upper frequencies. Warmth implies certain mids etc.
It's kind of a basic definition, but these would be assumed by me when hearing the terms. Warmth also has to do with even VS odd harmonics in my eyes, but even these carry over to the other definitions.. even harmonics, while pleasant, mix in with the other even harmonics more .. again, this is all just my take on how I hear things.
Make your sound your own! .. I do not work here, but the benefits are still awesome
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.