Is it possible to delete a lead in measure that is not being used on one track. I have 2 pitches sounding while the drum count is happening on my bass track, I went to edit notation and cannot find any notes to delete. Thanks for your help in advance Rich
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
I'm not quite sure what to make of your problem. It's not one that I'm familiar with.
Please correct me if I'm wrong but the way I'm interpretting your post is...
1. You are referring to the 2-bar count-in that's built into BIAB.
2. The problem sounds are on the bass track.
3. I'm assuming that you know that the problem lies with the bass track because you've sequentially solo'd each track to isolate which one it is. Is this a correct assumption?
If the above applies...
When you go into Editable Notation Mode, to see the notation on the bass track, you need to select the button I've highlighted on the image below. Did you do this?
Also,
Are you using Realtracks or MIDI tracks?
If you could do a Printscreen of your main screen and then post the image, it would be very beneficial for all of us to see. (The link below will take you to a thread that explains how to post images if you are unsure how to do this.)
I did exactly as you understood it. There are no notes on the lead in bar on the bass track. I tried a print screen but the lead in bar does not print on the page.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
I can but I have been doing this for two and a half hours. I need to clear my head. I will reply tomorrow if that is okay. This night has been a total bust. Regards, Rich
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
What happened when you tried Videotrack's suggestion about muting everything and then seeing if you can still here the sound? This is important. He's testing to see if maybe an audio file has been rendered and is playing along in the background with your BIAB file. (This is easy to have happen.)
Track actions are in BIAB 2017 and found by right-click on one of the BIAB tracks (Bass, Piano, etc.) across the top or in the mixer.
style c_Eagle2 Contemporary Country, Bass and piano midi. All other tracks real. I un-muted bass track and that is definitely where it is happening but only at the count in. sounds like two pitches solid tone. When I moved it to real band I can actually see the sound at the count in and delete it but I cannot see anything in BIAB.
Last edited by Rich59; 04/18/1702:24 AM.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
Could you please take a print screen of your chord sheet so that we can see it? It might help. (We don't need a print screen of the notation... just the chord sheet.)
1. Under "File" click on 'New' to load a brand new blank chord sheet. This is important.
2. Go into Stylemaker and locate C_Eagle2.STY.
3. Load the demo song for the style.
4. Exit to the chord sheet. (The chord sheet should now be populated with the chords for the demo and the tracks will be loaded with the demo's instruments.)
Cannot print chord sheet. The print to pdf function will not work. I have tried to install the driver multiple times, Says its installed. When I try to print it says not installed. Rebooted computer and still does not work. As for loading the demo it worked fine. No issues.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
Rich, it would be better to mention the printer issue in a new, separate thread. That way you'll probably get more / closer attention to that particular issue.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I can't do much at the moment because I'm without internet.
Thanks for the image. I'm glad you got it working. Unfortunately that was not the one I was hoping for. I apologise. It seems that I didn't explain myself well. What I was after was a picture of the BIAB chordsheet.... the opening screen of BIAB where a user types in the chords and where one sets the key and the tempo, etc.
I was hoping that if I saw it, it might give me some clues.
Also, you mentioned that you can see the problem in Realband. Are you able to upload an image of that screen so we can all see it? That could potentially be useful.
Interestingly, when I followed Pipeline's instructions to convert the midi bass to a .wav performance track and move the performance track to audio, upon doing that and opening the audio editor, there were artifacts in the opening bar. Don't know if they were there prior to the conversion just thought posting may help get to a solution.
I finally figured out how to locate the artifacts but cannot delete them. I cut it and it is no longer on the screen but I still here it. I was confused earlier following Pipeline's instructions.
Had to unfreeze the track and re-Generate the track. Now artifacts are gone. Everything is good. Thanks for all your help. Greatly appreciated. Rich
Last edited by Rich59; 04/23/1701:23 AM.
BIAB 2018 latest build, Window 10 Pro 64 bit operating system X64 based processor Intel(R) Xeon(R) CPU ES-2670 @ 2.60GHz 16 Gigs Ram Tascam 2x2 audio interface. Podxt
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.