Log in to post
|
Print Thread |
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
Note: The following "essay" originates from an even longer reply I had made to a post elsewhere some good couple of years ago. I had been meaning to lift this section of it into its own designated "Tip" post, but something or other must've sidetracked me until I'd nearly forgotten all about it. Anyway here it is at long last: Tip: Always spend the extra minute it takes to insert the intended melody as Midi into the Melody track before you start rendering the accompanying instruments! You can then mute it, put a "Performance track" on it (vocal or any other thing), or use it for whatever you like. But if you need to free up that channel, then don't delete the underlying midi data until after you've rendered (and frozen!) the other tracks. Now, you may ask, "why is this important if I'm only going to make backing tracks for a singer or something", and the core reason is simply: The program obviously can't hear your vocal, but it can detect the midi - and it does make a difference in how the accompanying realtracks turn out!! In other words, they do somewhat 'take into account' (for the lack of a better term) if the melody is there or not (or more importantly, when it's there and when not), if the midi data is there as reference. I have even got instances where, once I had entered the midi melody, a Realtrack would then on subsequent regeneration actually avoid notes of chords that otherwise might clash with the melody (that trickster of an automatically added flat nine to a seventh comes to mind). It must, however, be acknowledged here that this statement is neither absolute nor infallible. Generally speaking, this works best (or is obviously best noticeable) with RT's that have a very varied, "decorative" performance data than, say, something that is strumming the same pattern bar after bar. But don't just take my word for this. Have a listen to these samples: The first is from BBox own "Artist" collection, and showcases how the accompanying piano provides this lovely flourish right after the melody. And the second sample is from a song I myself made, so the BBox crew couldn't possibly have prepared something specifically for it. In that sample, notice how the piano actually seems to be directly playing along with the melody, note for note! I maintain that these cases didn't "just happen", that what you get from the Realtracks is not just arbitrary or 'random', hence my advice. Thank you for taking the time to read all this, sorry for how long that "tip" became in the end.
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2013
Posts: 8,095
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,095 |
<<< Now, you may ask, "why is this important if I'm only going to make backing tracks for a singer or something", and the core reason is simply: The program obviously can't hear your vocal, but it can detect the midi - and it does make a difference in how the accompanying realtracks turn out!! In other words, they do somewhat 'take into account' (for the lack of a better term) if the melody is there or not (or more importantly, when it's there and when not), if the midi data is there as reference.>>>
I have also found this to be true if you use multiple RealTrack instruments on the same track. It seems the current instrument anticipates the change and transition notes precede the new instrument. After much experimenting, to me, using the same track for multiple instruments in BIAB makes these changes in a much more pleasing and musical fashion than having the instruments on separate tracks or generated in RealBand.
It is also much faster and easier to do in BIAB than moving tracks to RB or any DAW...
Charlie
Last edited by Charlie Fogle; 06/15/17 02:09 AM.
BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2016
Posts: 470
Journeyman
|
Journeyman
Joined: Apr 2016
Posts: 470 |
Hi Icelander, By accident I always have used midi on the melody track and I dont know why technically but it definitely has a bigger influence on the backing tracks than using just a melody without midi.Really important point u are raising .Actually it could be the one point that could improve ur backing tracks the most.Good post urs Hugh
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Aug 2011
Posts: 10,122
Veteran
|
Veteran
Joined: Aug 2011
Posts: 10,122 |
Really nice tip Eddie!
While what you've stated can't be proven scientifically, it makes sense. Thanks for taking time to share.
Jim Fogle - 2024 BiaB (1111) RB (5) Ultra+ PAK DAWs: Cakewalk by BandLab (CbB) - Standalone: Zoom MRS-8 Laptop: i3 Win 10, 8GB ram 500GB HDD Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD Music at: https://fogle622.wix.com/fogle622-audio-home
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
I don't know about "scientifically", but, as with any half-decent theory, the supporting evidence is certainly there. I had actually been readying myself for a lot more feedback of doubts than have (this far) been posted, and as such have more details to 'argue the case-, so to speak. But, much to my joy, I have been getting next no nothing but praise...and that "essay" was really getting on a bit already
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Sep 2003
Posts: 1,082
Expert
|
Expert
Joined: Sep 2003
Posts: 1,082 |
insert the intended melody as Midi into the Melody track How is that done, please. Thanks.
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2007
Posts: 447
Journeyman
|
Journeyman
Joined: Apr 2007
Posts: 447 |
So, just to clarify. When you make a performance track on your midi melody does that process "disengage" the midi effect on future realtrack generation? I realise that the underlying notation remains so you can revert to the midi track (after removing the performance track) but do you have to complete your real track generation prior to transforming to a performance track or does the underlying midi (under the performance track) still have an impact on realtrack generation. Col
WIN 10, BIAB WIN2022, Studio One 5, Audient iD4
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
insert the intended melody as Midi into the Melody track How is that done, please. Most commonly via a midi capable instrument that is connected to your computer. I gather that there are ways to enter midi notes into the Melody channel from within BBox itself, but I've never learned how to do it that way since I myself do use a midi capable instrument for this purpose.
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
So, just to clarify. When you make a performance track on your midi melody does that process "disengage" the midi effect on future realtrack generation?
Col If I'm understanding your concept correctly (and that is admittedly a rather big "if" here), then the core thing to keep in mind here is simply: The accompanying RT's can never "hear" audio performance track, but it always "knows" the midi when present. So regardless what audio you actually put on top of that midi, the program still only knows what the midi data is, not the audio (or at least to a far lesser degree if at all). Therefore, the other RT's are still going to go by the midi data, which I hope is what you were asking about.
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
An example of how I myself actually made use of that: The core statement in my first post applies to soloist Realtracks as well as comping ones, and I had set an RT soloist solo for a certain number of bars and it stopped midways into the last bar because that bar had a melody note ahead of the next bar. Now, I actually wanted that soloist to keep on and overlap my melody so what I did was change the midi melody (moved that note's start into the next bar) but kept my audio Performance unaltered, then redid the soloist - and it worked perfectly
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2007
Posts: 447
Journeyman
|
Journeyman
Joined: Apr 2007
Posts: 447 |
Thanks Icelander, So it seems that BIAB still interprets the underlying midi data (Melody track) even while the audio (performance track) is playing. Col
WIN 10, BIAB WIN2022, Studio One 5, Audient iD4
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Nov 2012
Posts: 4,777
Veteran
|
OP
Veteran
Joined: Nov 2012
Posts: 4,777 |
So it seems that BIAB still interprets the underlying midi data (Melody track) even while the audio (performance track) is playing. Col That is my meaning, yes.
There's only one thing to do in crisis like this - Sleep on it! ---------------------------------------------------------------------- BBox 2022 Audiophile, Mac Pro Intel, OSX 10.6.8, 800x600 (TV VGA)
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Apr 2007
Posts: 447
Journeyman
|
Journeyman
Joined: Apr 2007
Posts: 447 |
WIN 10, BIAB WIN2022, Studio One 5, Audient iD4
|
|
|
|
|
|
|
|
|
|
|
|
Post your own Tips and Tricks here
|
Joined: Dec 2007
Posts: 1,796
Expert
|
Expert
Joined: Dec 2007
Posts: 1,796 |
Thanks for this tip ..... F
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update Your PowerTracks Pro Audio 2024 Today!
The Newest RealBand 2024 Update is Here!
The newest RealBand 2024 Build 5 update is now available!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245
The Band-in-a-Box® Flash Drive Backup Option
Today (April 5) is National Flash Drive Day!
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
Learn more about this free update for Band-in-a-Box® 2024 for Windows at www.pgmusic.com/support_windowsupdates.htm#1111
Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!
If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Congratulations to the 2023 User Showcase Award Winners!
We've just announced the 2023 User Showcase Award Winners!
There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Thank you to everyone who has contributed!
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,578
Posts734,665
Members38,499
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|