i didn't get the hang of the song offset to allow for the drum count in
Bob,
Maybe this will help with understanding the bar offset a bit better...
The image below shows the bar offset settings (#1 on image).
The reason that it's usually set to -2 is to allow the 2-bar count-in that BIAB has when SGU/MGU files are loaded. Such a setting permits the song to follow the normal convention of the music starting at bar 1.
From a song layout perspective, if you have 'Bar Offset' set to -2 and then load in a BIAB file you'll see two bars (that is, bars "-1" & "0") before the song starts playing at bar 1. These first two bars are the 'offset' bars.
The settings below Bar Offset (that you had set to 1 and 1), tell the song which RB bar number is the first bar of the song (i.e. 'Start') and which bar number is the last bar of the song (i.e. 'End'). Having both set to 1 is saying "This song is 1 bar long".
Because you had the Bar Offset set to 0, this meant that if your song had a 2-bar count-in, it wouldn't start until bar 3 (hence Kent's comment about setting 'Start' to 3).
The settings on the image below say the following....
1) Bar Offset = -2 (this means a 2-bar lead-in before the song starts)
2) Start = 1 (this means the song will start at what RB has defined as bar 1 on the bar counter)
3) End = 32 (this means the song finishes at RB's bar #32)
Hope this helps.
Regards, Noel
Last edited by Noel96; 05/24/1812:49 PM. Reason: correcting errors
still having trouble when I open a seq file in Real Band. If I want to generate a RealTrack to add a part even if I select the whole track and then choose generate all I get is a few bars. Tried setting the 'from............ to' settings to match the whole track but all i got was two bars again.
Same for me; i rarely work and worked with Realband (v5 BTW) because of these erroneous behaviors .... just found out that soloing a real track over a selected few bars won't work with RT 2691 over the selected area, on a fresh track here see below. All you get, if it works at all, is just a bar at the beginning ....
Besides, generating RealTrack solos in BIAB is also a problem, especially when there are beat-count measure changes in a song arrangement as in this one .... sort of get fed up with this; just got my real REAL strat-guitar out of the closet to do the job for now.
PS i an running the whole darn windows 1803 being administrator, and even when i select run as administrator is behaves the same ... And solo-generating the whole track just gives you only some dispensed useless solo pieces over only a few bars .. see picture 3. F
Just to clarify my original problem some BIAB tracks worked fine but on some the start/end bars and offset seemed to have been set wrongly (not by me!) and having just upgraded from 2008 BIAB to 2018 and using RB for the first time there were settings I was unfamiliar with
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean