Previous Thread
Index
Next Thread
Print Thread
Go To
Off-Topic
Joined: Jan 2002
Posts: 7,913
R
Veteran
OP Offline
Veteran
R
Joined: Jan 2002
Posts: 7,913
Supposedly, this piano had been tuned the last time 6 years ago. This piano was only off by about 11 cents on average across the middle few octaves. The thing that was particularly impressive is that there were probably only 15 notes across the whole of the piano that were significantly not consonant with themselves.

I brought it a little closer to A440, and doggone it if those same 15 notes didn't need to have a twice-over or thrice-over after going through the whole thing.

It was an M405 model. It's 12 years old. Loud and clean.

It also didn't have a bunch of ugly decoration on it. That's one thing I like about my own Yamaha - plain jane styling - will kind of hide on the wall for years to come.

-Scott

Off-Topic
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Yeah, I've noticed that the M's are an easy tune, too. And they HOLD it. Great pinblocks.

One thing to look out for in certain M's and also the C's -- hardened hammer felt.

You can websearch up enough info about that one, Scott. There was some felt that would just turn hard in a few years time. Scuffing it up doesn't help much, the only real answer is to refelt all the hammers. An "ouch" of a job the first time or two, a piano technician can sometimes find a heckuva deal on an M or a C because of this, though, and refelt and turn the piano back into something divine -- and resell at the "proper" street price because of it.

If the piano has good felts in it, not to worry. They changed the material somewhere along the line when the problem was finally recognized by the factory.

The way I spot the hardened felt syndrome on the Yamaha's is simple enough. Having experience with MIDI keyboards, the Yammy with the hardened felt problem often feels like you are trying to play a MIDI piano that has had its touch sensitivity set too light. And so all notes sound like they are being hammered or pounded, even when you use a light touch. bang-bang-bang The piano that is "on its way" to this problem can be a little harder to spot, but not for someone who is keen to what a piano should sound like when played pianissimo. When the felts are just starting to harden, one can often use felt dressing tools to alleviate the problem, extending the life of the felt a few more years, especially of value for the home piano enthusiast. Pros should likely get the new felts immediately. If their M or C has the problem, that is.


--Mac

Off-Topic
Joined: Jun 2005
Posts: 7,687
Veteran
Offline
Veteran
Joined: Jun 2005
Posts: 7,687
All these years of reading your posts, I had no idea you're both piano tuners.
About 5 years ago I decided I wanted a grand but the only way to afford a good one was to buy a ugly beater and rebuild it so I bought a 5'8 50's era Knabe grand that somebody had painted a lovely chipped up beige with a brush 20 or so years ago. It was structurally solid, no cracks in the soundboard, just looked like crap. I completely disassembled it in my living room in a condo complex, no garage, right down to having some friends over to remove the plate which I refinished on the balcony, putting the case on blocks, removing the lyre and legs, everything. Working on the action and restringing is beyond me so I hired that out but I did everything else including refelting, new dampers, the whole deal. Since it was in my living room, after stripping it with a ecofriendly orange stripper, I refinished it by doing hand rubbed shellac, "french polishing".
I could have used some tips from a couple of pros, I should have posted some questions. As it is, I spent about 6 months researching this on the internet before I started. The tech I used for the action, hammers, repinning and keys did a great job too.
You guys may not appreciate this part, but I created a paper company just so I could order all the parts I needed from various piano supply houses around LA without being a member of the tuner's guild...
I still have it in mind to do another one, maybe a bigger Steinway or Mason Hamlin but not in my living room this time, I would rent some space somewhere. I really love those Mason's.

Bob


Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
Off-Topic
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Knabe's are great old American pianos.

I'm glad to hear you saved one from the junk heap.

As for creating the paper company, that's how its done, son!

I'm not a Guild member either, just some guy who started a job many years ago at a piano and organ store and branched out. Some of the old boys who originally taught me the ropes were Guild members. We used to deliver a piano and then schedule a tuning, of course. I was one of the new generation that started using a Stroboconn to tune pianos. Those old boys certainly frowned on it a lot back in the day. But once I'd owrked out the stretch tables with it and documented same, I could retune a certain piano *exactly* the way it had originally been tuned, with absolute reproduction of result and precision. Today, there are digital stroboconns that can "remember" a piano and recall it for the retune. Wonderful things. Still, one should first learn to tune "by the beats" so that they understand what's really going on there.

I used to deliver a piano as the salesman and sit right down and bring it in to the fork and set the beats for the size of piano and room, right then and there. The old adage that what makes you a "pro" is that somebody paid you to do the job more'n once, I guess.

I'm never too far from a hammer, fork and mutes, though. The skill can really come in handy when you are faced with playing whatever's sittin' in the club, too...


--Mac

Off-Topic
Joined: Jan 2002
Posts: 7,913
R
Veteran
OP Offline
Veteran
R
Joined: Jan 2002
Posts: 7,913
Well, I wouldn't call myself a piano tuner yet - I've tuned about 10 pianos total. I learned the very basic rudiments from the gentleman who tuned our piano for years when he offered to show me the introductory ropes. I don't have the stretch tuning aspect even started except I do tune the upper and lower 2 octaves entirely by ear - mainly out of necessity since my cheapo little guitar tuner, even with a piezo pickup, simply doesn't lock onto anything in those octaves. I think the pianos might end up slightly stretched, but I can't be certain.

The gentleman I learned from has been tuning for 40+ years. He has used a stroboscopic tuner for all of those years - a very cool looking piece of analog gear that I would love to own but my understanding is that the refurbed models cost loads.

Where I live, there are so many pianos to be tuned, I hope that I am not taking work away from a true guild technician. I need to invest in some different sized heads for the single hammer I have, and I also need to get some felt for the upper couple octaves.

I'm doing about 1 piano every 3 weeks right now. Actually, that's enough since I have a day job, a wife and 4 kids. I'm getting the customers that are mostly cheapskates (like me) since I don't feel right charging the same rate as a guild technician and I really don't have the tools to do repairs. (yes Mac, I remember you telling me that I can make my own tools - but I've got the Schaff catalog and it's overwhelming).

-Scott

Off-Topic
Joined: Jun 2005
Posts: 7,687
Veteran
Offline
Veteran
Joined: Jun 2005
Posts: 7,687
Quote:

...I really don't have the tools to do repairs. (yes Mac, I remember you telling me that I can make my own tools - but I've got the Schaff catalog and it's overwhelming).

-Scott




I found a lot of stuff on Ebay Scott, including a box of misc piano tools for something like $20 or so including 2 tuning hammers, some rubber spacers and other stuff. As I was driving around LA picking up things, I would wander around the back of several different shops where they were rebuilding pianos and talk to the workmen who were very helpful. Several of them would say here take one of these things, I have several already. I've got a whole file cabinet full of notes, phone numbers and leftover stuff relating to rebuilding pianos. One guy gave me the name of a company in Minnesota that has all the soundboard and fallboard decals for what looks like every piano company that ever existed that I used for my Knabe. None of this stuff is particularly hard, it's mostly grunt work and common sense except for the keyboard assembly and restringing with new tuning pins. I was tempted but decided nah, leave that to a pro. The only potentially bad thing is to gradually release the tension on the old strings before you start cutting them, otherwise you might get sliced up or lose an eye.

Bob


Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!

If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.

A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."

"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."

"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."

Happy Easter! Holiday Hours...

2024 is well underway - it's already Easter Weekend!

Our Customer Service hours this weekend are:

Friday, March 29: 8-4
Saturday, March 30: 8-4
Sunday, March 31: closed

Regular hours resume Monday, April 1st - no joke!

Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Forum Statistics
Forums66
Topics81,400
Posts732,555
Members38,443
Most Online2,537
Jan 19th, 2020
Newest Members
danielsk, Mark Morgan, zagrajbarke, Ernest J, Izzy
38,442 Registered Users
Top Posters(30 Days)
MarioD 199
Al-David 132
DC Ron 116
rsdean 84
dcuny 83
Today's Birthdays
(charlie), WobblyGstring
Powered by UBB.threads™ PHP Forum Software 7.7.5