Rharv,

Thanks!

I downloaded the WIN 7 driver for the Roland XV-5050 and installed without any problem.

Now I want to use the XV-505 as sole output device using an USB cable only, but I can only hear the MIDI sounds. Real Sounds & Drums can be seen “playing” in the mixer window but not be heard.

So I wanted to try a suggestion I got from BB support in connection with my posting: “No Real Sounds” after upgrading to WIN 10” (this is on a different laptop).

“You'll also want to select the SD-50 (XV-5050) as your audio driver. In Band-in-a-Box go to Opt | Preferences | Audio and change your driver type to ASIO. Then select the SD-50 as your ASIO device, check the box for ASIO Always On and hit OK. That should ensure that you're sending all the audio to the SD-50 (XV-5050) in addition to all your MIDI data.”

However, the XV-5050 is not displayed as an option in the Audio/ASIO window!

Any suggestion?

Is there perhaps a setting in the XV-5050 I need to change?

Hope for some help here!
Tonnie