Previous Thread
Index
Next Thread
Print Thread
Go To
Recording, Mixing, Performance and Production
Joined: Apr 2005
Posts: 72
K
Enthusiast
OP Offline
Enthusiast
K
Joined: Apr 2005
Posts: 72
OK. Here's a chance for EVERYBODY to chime in. I've been playing drums for 45 yrs, and recording other digital audio for 25. Although, I've rubbed elbows, and am respected by VERY accomplished musicians, I don't claim to know even half as much as the reams of volumes that others have already forgotten. I've never had one formally taught course, or lesson. All I know is that other extremely capable, and experienced musicians that have heard my work, and mixes has always complimented my work. As far as reverb, some of them say "Well, I might not put quite as much reverb, but I don't think your mix is "WRONG", or distasteful, or illustrates a particular incompetence, or ignorance about how to apply reverb. SOO, having said that, is there any consensus, or general rule that I'm not aware of for applying reverb, other than your EAR? PLEEZE bleed all over this. KC


i7-12650H CPU, 32Gig RAM/Win 11 Pro. PreSonus 1824C, Native Instr S88 Mk1, ATOM SQ, PreSonus Sphere, Sonar Platinum, SampleTank4, BIAB 2023.
Recording, Mixing, Performance and Production
Joined: Dec 2002
Posts: 11,333
Veteran
Offline
Veteran
Joined: Dec 2002
Posts: 11,333
Old rule of thumb, add reverb until you hear it, then back it off a notch!

Recording, Mixing, Performance and Production
Joined: Oct 2007
Posts: 4,245
Veteran
Offline
Veteran
Joined: Oct 2007
Posts: 4,245
Quote:

Old rule of thumb, add reverb until you hear it, then back it off a notch!




+1 for that.

Recording, Mixing, Performance and Production
Joined: May 2008
Posts: 5,063
Veteran
Offline
Veteran
Joined: May 2008
Posts: 5,063
Another +1 for a general rule.

It really depends on the sound you're after. Reverb waxes and wanes in popular music like length of skirts and width of ties.

Personally I'm glad it's back "in" now to use it a little heavier than overly dry.

BTW, cool name King Conga.

Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 3,311
ROG Offline
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 3,311
I think it depends on whether you're trying to simulate a natural environment, or using it as an effect. For a natural environment, I don't think the listener should be aware that reverb is being applied, which is really just the general rule as described above.

As an effect, like the Phil Collins snare drum in the 80s, then anything goes. As Josie says, a lot of it is down to fashion, which is why when you listen to some tracks the reverb will tell you which decade it's from.

ROG.

Recording, Mixing, Performance and Production
Joined: Jan 2002
Posts: 7,913
R
Veteran
Offline
Veteran
R
Joined: Jan 2002
Posts: 7,913
You wanted opinions. I think ROG has it right.

It all depends on the desired outcome. If I WANT to feel like drums are thundering in a cavernous room, I have to hear the reverb (Think the opening drums on Big Country's In a Big Country from The Crossing) https://www.youtube.com/watch?v=KYxuH6LH-DI

If I'm making an 'intimate' acoustic track, then the back it off till you don't hear it idea applies. If I'm using synth patches in an electronic track, then I almost always juice the reverb till it's obvious.

Reverb can be used in so many different ways; bring the listener closer or put them farther away from the source, etc.

Here's another example: Sampled piano is almost always close-mic'ed. If you mix it in to a track where there is reverb on other instruments, then it's going to sound in-your-face and out of place. Dial up the reverb and dial down the direct sound to set it back into the mix. I do this almost always for the pianos that are in Garritan Personal Orchestra and the excellent 'Splendid' soundfont from Akai.

Also, there's bunches of different types of reverbs - THESE can lead you to a decade as much as anything else. Spring, plate, room simulation, etc. As for drums for tracks that have very little to no reverb; pretty much any of Steely Dan's stuff from the 70's are about as dry as you can get. Listen to Hey Nineteen, drums are dusty dry. However, tasty reverb on the EP and synth leads, vox. https://www.youtube.com/watch?v=ipc9pL27krs Nothing says 'the 70's' to me more than dead dry drums. This song by Steely Dan could easily be the theme song to the Barney Miller show. http://www.televisiontunes.com/Barney_Miller.html (Which I think includes Carol Kaye on the juiciest bass-line to ever grace a TV show theme)

So, sorry there's no right answer. It is probably one of the most abused effects.

Recording, Mixing, Performance and Production
Joined: Jun 2000
Posts: 2,217
Veteran
Offline
Veteran
Joined: Jun 2000
Posts: 2,217
.
>...So, sorry there's no right answer. It is probably one of the most abused effects. ..>>

Amen, and amen. If there is a rule to follow its the general rule stated above. But then there are lots of cases and instances where the rule is successfully broken. I guess what I do is follow the rule first, and then add reverb in cases where I have a specific reason to add some space. Or...I'll roll off the reverb further if I want to create the illusion of whispering in your ear.


Flatfoot sez: Call me when 'Talent-in-a-Box' is ready to ship! -- [8{>

Got some tunes on You Tube:
http://www.youtube.com/user/flatfoot50
.
My BiaB lesson site:
http://jdwolfe0.wixsite.com/learnbiab
Recording, Mixing, Performance and Production
Joined: Jul 2002
Posts: 3,563
P
Veteran
Offline
Veteran
P
Joined: Jul 2002
Posts: 3,563
You may find some helpful information in the reverb section of this link

http://pghboemike.wordpress.com/2013/03/24/digital-music-production/


Lenovo YOGA 900 Window s 10 Home 64bit 16GB RAM\2018 13” MacBook Air casio wk7500 presonus audiobox i2 usb interface
casio wk-7500
biab & realband 2023 everything pk both with Current builds
Recording, Mixing, Performance and Production
Joined: Nov 2008
Posts: 897
Expert
Offline
Expert
Joined: Nov 2008
Posts: 897
I've always loved all kinds of reverb, love the way it can quickly "tail off"

The Lexicon LXP-1 is an old (1980s) half-rack reverb unit that studios still use today. The LXP-1 was discontinued a long time ago, but even with today's standards, it sounds fantastic.

I also have the LXP-5 for a complete "plate" of reverbs...

And that old Lexicon Vortex has entranced the audiences along with the little blue box,
Jam Man...

My ears are always ringing...guess I blew them out listening to Theoloneus Monk.


Yamaha...Motif ES-8, Motif Rack, CS6X
Korg...Karma,Triton Classic, PA-80, M-1+
AkaiSampler-S5000, Roland.. X5080 Rack/G-1000 Arranger
Various Guitars/Basses Amps Pedals Rec.Equip.


Plus, BIAB 2015 and Sonar Platinum 2015 Upgrade from Cakewalk's Sonar X-3
Recording, Mixing, Performance and Production
Joined: Jan 2003
Posts: 5,025
Veteran
Offline
Veteran
Joined: Jan 2003
Posts: 5,025
A little dab will do ya.

Trax

Recording, Mixing, Performance and Production
Joined: Oct 2007
Posts: 2,610
Veteran
Offline
Veteran
Joined: Oct 2007
Posts: 2,610
Quote:

A little dab will do ya.

Trax




Agreed. That's the trick.

Cheers,
Mike


Cheers,
Mike

My Music * Asus ROG Strix G15CF 32 GB DDR4 4TB HDD + 1 TB SSD NVIDIA GeForce RTX 3060 8GB Win 11 AKAI EIE PRO Sound Interface. BIAB/RB 2024 UltraPak Build - Latest
Recording, Mixing, Performance and Production
Joined: Feb 2005
Posts: 2,646
P
Veteran
Offline
Veteran
P
Joined: Feb 2005
Posts: 2,646
Ballads can handle more than an uptempo number, generally, but there is really no hard and fast rule to that; as a lot of the rock of the 50's, ballad or uptempo; were smothered in verb, **tip for verb: If the verb has a highpass filter cut around 250hz. For a ballad use a hall or chamber verb, the decay for a ballad runs from 2-4ms, predelay set to tempo of song or in chopped up increments rounded up. example 85 tempo might divide in 4th and set predelay to 22ms, half 43ms etc. settings below the songs tempo up to the tempo will give a fuller sound, much like doubling. uptempo numbers use a plate, room or a bright chamber with a .1 to .5ms decay, predelay higher 100-250ms. Once again set your predelay by the tempo of the song. Once again these are just tips, no hard and fast rule. It is really the way you want the song to sound. One reason not to go overboard with the reverb though is when the song is mastered the compressors can play havoc on the sound. Also watch eqing after adding reverb as this can cause very unpleasant sounds. Hope this is helpful!


My Tunes

Psalm 57:7 My heart, O God, is steadfast, my heart is steadfast; I will sing and make music.
Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 13,977
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 13,977
I may be an outlier but, in general, I see reverb as a way to allow the vocal or instrument to bleed into the overall mix. Of course I want each track to stand on it's own but then have its edges lost in the mix. I realize I'm not articulating this well! And since I try to give my mixes a live feel I may be biased. Like a live jam in a good room I use reverb to let all the tracks settle in the mix and yet sound distinct when it's their turn. When I'm mixing I just can't separate myself from many years of great living room jams.

Recording, Mixing, Performance and Production
Joined: Apr 2003
Posts: 881
Expert
Offline
Expert
Joined: Apr 2003
Posts: 881
"Old rule of thumb, add reverb until you hear it, then back it off a notch!"

Yup, I live by this, but I have a VERY difficult time hearing Reverb so I am usually too loud by any standard. frown

But by using short Delays I can get the "space" I am looking for without worrying about washing something out, because I can hear the delay a lot easier. And it helps keep the mix uncluttered as well... grin

Works for me! cool


i5 3.20GHz, 32gb RAM, 1tb SSD OS, 12tb HDD, 4gb gForce vid card, 32" monitor, Audient id44, Win10 x64, BiaB/RB 2023, Reaper 6,IK Multimedia Total Studio 3.5 MAX, Waves 10
Recording, Mixing, Performance and Production
Joined: Jan 2013
Posts: 1,260
Expert
Offline
Expert
Joined: Jan 2013
Posts: 1,260
IMO....just to add to what others have stated.

Reverb is not always necessary in any final mix not to mention the dated cliche of 'less is more'.
The fewer the instruments in a mix the more a reverb choice can be acceptable/appropriate.
The use of reverb is over used much of the time and many think it can mask less than stellar original tracks.

That's my quick take on it....carry on.




Last edited by chulaivet1966; 05/04/13 11:12 AM.
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®

New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!

This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!

When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.

Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video

The new Band-in-a-Box VST DAW Plugin Verion 6 adds over 20 new features!

Watch the new features video to learn more: Video: Band-in-a-Box® 2024 - DAW Plugin Version 6 New Features

We also list these new features at www.pgmusic.com/bbwin.plugin.htm.

Forum Statistics
Forums66
Topics81,394
Posts732,487
Members38,441
Most Online2,537
Jan 19th, 2020
Newest Members
zagrajbarke, Ernest J, Izzy, BenChaz, Csofi
38,440 Registered Users
Top Posters(30 Days)
MarioD 195
Al-David 124
DC Ron 112
dcuny 87
rsdean 82
Today's Birthdays
CeeDee, SethMould
Powered by UBB.threads™ PHP Forum Software 7.7.5