If a song has a mix of 3/4 and 4/4 time signatures, and needs to start in 3/4, it needs to use a 4/4 style and use F5 to set the first bar to 3/4. However, this means that the count-in will be in 4/4 when the song then actually starts in 3/4.
It seems to me that it would be a whole lot more practical if Band In A Box just produced the count-in using the same time-signature as the first bar of the song. If the first bar plays in 3/4, the count in should automatically be in 3/4. This would be a great improvement.
Hope others approve.
Regards Trevor
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I remember the first time, after learning that I must use a 4/4 style if I wanted to have both 4/4 and 3/4, setting the first bar to 3/4 and getting a 4/4 count-in. Whoa.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
I remember the first time, after learning that I must use a 4/4 style if I wanted to have both 4/4 and 3/4, setting the first bar to 3/4 and getting a 4/4 count-in. Whoa.
Yes, totally agree Matt. Expecting a 3/4 count-in, but getting a 4 beat count-in and then immediately launching into a 3/4 song is very distracting. I got used to it but nevertheless there has to be a much nicer way.
Frankly, I don't think it would be incredibly difficult for the program to determine the time signature at the first bar and apply a count-in to suit. (2013.5 !!??)
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Thinking further upon this, I can make a case for BIAB looking at the first several bars to determine the count-off, if the number of beats per bar varies and that variation repeats. And you should be able to override the program's choice.
For Take Five, where you might write repeating measures of 3 beats then 2 beats, it would be nice to get a count-in of 3, 2.
For another example, let's say we are writing out Blue Rondo a la Turk as measures with beats as follows: 2, 2, 2, 3. You might want to reproduce all four measures as the count-in. Or, perhaps you would be comfortable with a 4/4 count-in because of the transition from the bridge.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Thinking further upon this, I can make a case for BIAB looking at the first several bars to determine the count-off, if the number of beats per bar varies and that variation repeats. And you should be able to override the program's choice.
For Take Five, where you might write repeating measures of 3 beats then 2 beats, it would be nice to get a count-in of 3, 2. (etc...)
Thanks Matt. Of course you are exactly correct, but I hope these additional technicalities don't get PG to put this in the too hard basket. I understand that the program works with limitations for songs containing bars with different time signatures, slicing off beats to get the correct value.
However, for these occassions, maybe a much easier way is to just provide an override option checkbox in the Song Settings dialog:
Any takers?
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
If I could expand on it why not make any number of beats available for a count-in? This would satisfy any time signature from 2/4 to 12/8 including 5/4 and such. This goes along with what Matt had said earlier.
Me, it's not about how many times you fail, it's about how many times you get back up. Cop, that's not how field sobriety tests work.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Thanks Guys for your endorsement. Yes, the mock-up is only a concept, and could definitely be improved on.
The key point is that the count-in could be tailored to suit each specific song, rather than relying on Global Settings. As mentioned, this would be great for songs in different time signatures (5/4 etc)
It might be something like:
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Count-In based on actual time-signature of first bar
BUMP !!!! There has been absolute forum members agreement, not one objection, but nothing happened in about 3 years.
This is a really important issue. If the song starts in 3/4, please just provide a 3/4 count in. Just like every musician in the real world does.
(Instead of looking at the time-signature of the song to decide the count-in, just look at the time-signature of the first bar. C'mon team, not hard, surely?)
Please support this PGM. This is a Wishlist for Product Improvements, not a lucky-dip wishing well. There is a difference. Please support this pragmatic request.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.