Sometimes when I've contacted them there's a response in about 24-48 hours. Other times I've contacted them to report an issue, and there's a response in a week or so. There is a chat / Online Help support link on this page that might get a faster response. The company has received accolades for the excellent support they provide. So maybe try a different support approach.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
I have the exact same problem. I contacted PG Music about it a few months ago. They were unable to solve the problem. if anybody find a solution , Please let me know
They responded to me within a week, I am having the same problem you are having.Their response did not solve the problem.
See their response below:
"PG Music Technical Support <support@pgmusic.com> Jun 16 Hello Errol,
Are you only having this problem with MP3 files? In the past we've noticed that there are sometimes issues importing MP3 files that occur when the program converts them to WAV for use in the Audio Chord Wizard. Can you try importing a WAV file into the wizard? You could use a free program like Fre:ac to convert an MP3 to a WAV file if you don't happen to have one handy to test.
Thank you, Kallum PG Music Inc. Important Reminder: Please include all previous correspondence when replying to this message."
Last edited by ejrene; 09/06/1609:27 AM. Reason: added email from PG Music
So far I did not have any contact with the support (after one week)
I have tried already importing different files, different format mp3 wav but no improvement I have also impoted from different part of the software from the file Menu the Audio Menu and from the Icon same thing
Wait & see !!!!
Good to know I am not the only one to have such problem
Sorry, I can't find any sign of your email (we would have replied by now). If you send it again to support@pgmusic.com we'll reply as soon as possible.
From the screenshots you posted, it looks like you may have had a project open already that had been generated by the Audio Chord Wizard, but it's a bit hard to tell. That would explain why the Audio track is visible on the mixer, and the style is turned off.
Does the same thing happen if you start a new project (File - New), and then launch the ACW?
Thanks Kent PG Music
*edit*
I've found your emails, and have replied to them. The first one was sent Friday evening after we were closed, and Monday was a holiday. That's why there was a bit of a wait.
In the past we've noticed that there are sometimes issues importing MP3 files that occur when the program converts them to WAV for use in the Audio Chord Wizard.
It's probably not this, but since the comment was made that some MP3's don't work (but others obviously do), it makes me wonder if it's something like the difference between VBR (Variable Bit Rate) versus CBR (Constant Bit Rate) encoding, or maybe a result of the CODEC (Fraunhofer, LAME, MP3Pro, etc) used to create the MP3 in the first place. And of course, is the DEC part of the CODEC on your machine up to the task of decoding the MP3 file?
I would experiment with a variety of files to see what the problem might be.
Just a thought.
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
I've found your emails, and have replied to them. The first one was sent Friday evening after we were closed, and Monday was a holiday. That's why there was a bit of a wait.
I did not receive any answer yet I have checked my mail box even the spam folder !!! and I have checked in my profile the mail address is OK
To answer your other question regarding the use of different bit rates or VRB encoding all my mp3 are in 320 fix and the same mp3 was working in the bast is no longer working ???
I don't think it is because of an existing project already loaded as it does the same when firt openning BIAB ...
I can't imagine why you didn't get my email. I'll send another email to the address you used to register in the forums as well as to the one you emailed us from.
Just to let you all know you are not alone - I have the same issue won't work for MP3 or WAV files does not work in Real Band either. Not sure when it stopped working but it used to work. My solution was to use CAPO on my IPAD which is obviously isn't too helpful.
I wonder if it's possible to do get into the ACW in a couple of steps instead of all at once? To this end, try the following and see what happens.
Also, the results from the below test might give Kent some added insight since it works through individual steps.
1. Follow 1, 2, 3 on the image below and import an audio to the Audio track. I suggest using a WAV file rather than any other audio format.
Simply select the default values.
2. Once the audio is imported, open the Audio Chord Wizard Utilities (as shown on the image below).
3. When the ACW utilites dialogue box come up as shown below, there should be an "Open Audio Chord Wizard" option as shown below. Click on this and see what happens.
If doing the above still does not get you into the ACW window...
4. Repeat the above and load an audio on to the Audio track.
5. Open the ACW utilities (step #2 above).
6. This time, rather than open the Audio Chord Wizard (step 3), choose "Erase the audio wav file in BB".
This might give the ACW a 'kick' that could be self-correcting.
7. Now repeat steps 1, 2, 3 above and see what happens.
I've posted your screen grab where it appears you are saying that when you are at that screen and hit the 'Play' Button (Highlighted by you in your post) that rather than the song playing, the program goes directly to the ACW Utilities screen which is the second screenshot you posted earlier.
If that is what's happening, the Utility Screen is responding correctly because if the song doesn't play, there is no chord detection nor tempo map created to import into Biab.
That result indicates there may be an issue in the creation or corruption of the Tempmain.wav file that is created by the ACW.
A Tempmain.wav issue could also be involved with a PGMusic support observation in an earlier post that; "From the screenshots you posted, it looks like you may have had a project open already that had been generated by the Audio Chord Wizard, but it's a bit hard to tell. That would explain why the Audio track is visible on the mixer, and the style is turned off."
Just a quick observation... the above screen grab above does not show the full ACW utilities selection.
If the above post is compared with my post immediately before it, it can be seen that the "Open audio chord wizard" button that sits below "Erase the audio WAV..." is not present. (I suspect that this is significant.)
My thoughts are that my above, previous suggestion might better help isolate where the problem is occurring.
I noted that difference between your screeshot and Saxfred's screenshot.
You have the Open ACW button because of the way you are attempting to open the project. You are importing the audio prior to opening the ACW so Opening the ACW button is the next step.
Saxfred was attempting to open the file by opening the ACW first and importing the audio into the ACW. This method creates a TEMPMAIN.WAV file that is used by the ACW to analyze rather than the original file.
What appears to be happening with Saxfred is the ACW is not picking up the TEMPMAIN.WAV file to analyze.
I suspect that the file is either corrupted or maybe more likely, since it happens with all imports, the ACW has lost the path to where the TEMPMAIN.WAV file should be found. I think the ACW is looking in the wrong directory for the TEMPMAIN.WAV file.
If you analyze audio through the ACW and select 'Cancel' rather than 'OK to Send to Biab' - It creates the exact window/message that Saxfred is getting, which occurs because the ACW is cancelling out of analyzing the TEMPMAIN.WAV file for some reason.
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.