SIQ, VST 1.11.7 and Cubase 9.5; can't get it working ... Anybody?
Just sent to PG support: --------------------------------------------------------------------------------------- installed 1.11.7 after deleting all the old versions (manually according your list). Cubase 9.5.41, Widows 10 64bit, RME UFX ii, ASIO. Biab 607 plays well with a latency of only 128 samples, no distortion it seems.
Plugin loads, only on a Cubase 'intrument'= VST track, has to be seen as VST. Plugins like EZdrummer can be addressed via a 'normal' MIDI track. checked the RT locations in preferences etc, but as soon as i address and load a MGU songfile, the plugin disappears, and when you bring it up front again, you get this page (again, as with the old version). (SEE PICTURE) OK this and the plugin is up front again, it loads a selected style, but the tracks won't be rendered. (pressing select style goes to the correct folder, pressing demo produces sound from the VST.)
ADDED information: I just loaded an old SGU MIDI only file OK, plays etc, seems the audio-RT stuff has a problem ... ---------------------------------------------------------------------------------------
Just to add further confusion. The plugin is actually version number 1.7.11 when you look at the file in Windows properties yet even PG Music are refering to it as 1.11.7 in the release notes and in the support ticket they sent to me.
I still can't get the thing to render squat. Honestly I've given up on it by now as it seems to provide so little usefulness even if it did work.
Thanks for pointing out the typo in the patch docs. It is indeed 1.7.11. You can check the version in File | Preferences | About. If you didn't get it to generate track, we would need to have more info about what you tried etc. I've been running Cubase for a while, selecting styles and generating and dragging tracks. To start try:
1. Right-clicking | Add track | Instrument | Band-in-a-Box DAW Plugin. 2. Check folder paths in File | Preferences, to make sure they are correct. 3. Click Style, choose a style, and OK. 4. Press Generate.
I do experience the issue where it loses focus after selecting a style or generating tracks, but as soon as I click the main screen or press Alt+tab it comes to the top immediately. We will look into that.
Just tried out the new VST in a DAW - man, is it slow to generate tracks! Also seems to get "clogged" towards the end of generation. Plus it seems you cannot generate individual tracks UNTIL the whole song has been generated.
It also slowed down PC operations on the whole as well. For example getting in to the forum took about two minutes while it was generating, usually it's a few seconds.
So yeah I think, while it's a great idea and very welcome tool, it does need some refinement I think.
1. Right-clicking | Add track | Instrument | Band-in-a-Box DAW Plugin. 2. Check folder paths in File | Preferences, to make sure they are correct. 3. Click Style, choose a style, and OK. 4. Press Generate.
I do experience the issue where it loses focus after selecting a style or generating tracks, but as soon as I click the main screen or press Alt+tab it comes to the top immediately. We will look into that.
Hi Andrew, did all that, but things go wrong after addressing an RT-ridden MGU with in my case 2/4 and 4/4 bar counts. Pressed Generate LoL. The chords won't display, and the VST disappears as said. It works with an other MIDI only SGU and a 4/4 MGU however.
Generating that SGU: Takes a while, and a a fully RT ridden MGU however takes almost forever, and hangs for a while at about 80%.
I addressed two other recently made MGU's with 2/4 and 4/4 bars in it: that also gives the above error message each time ...
Sometimes the plugin disappears from view, while loading, but not always.
Loading the MGU with the disappearing GUI: I waited it out till all the yellow green popups are finished, if it works ... and only then bring up the VST: plays OK solo-ed sound and all. Starting Cubase playback: the bar indicator follows, but NO SOUND.
====> ONE IMPORTANT TIP: SHORTEN THE DISPLAYED NAME OF THE VST, (remove 'DAW PLUGIN' in the naming f.i.) it doesn't always display fully in the inspector in CUBASE, the name is quite long compared to other VSTs IMO.
1. Right-clicking | Add track | Instrument | Band-in-a-Box DAW Plugin. 2. Check folder paths in File | Preferences, to make sure they are correct. 3. Click Style, choose a style, and OK. 4. Press Generate.
I do experience the issue where it loses focus after selecting a style or generating tracks, but as soon as I click the main screen or press Alt+tab it comes to the top immediately. We will look into that.
Hi Andrew, did all that, but things go wrong after addressing an RT-ridden MGU with in my case 2/4 and 4/4 bar counts. Pressed Generate LoL. The chords won't display, and the VST disappears as said. They do with an other MIDI only SGU and a 4/4 MGU however.
Generating that SGU: Takes a while, and a a fully RT ridden MGU however takes almost forever, and hangs for a while at about 80%.
I addressed two other recently made MGU's with 2/4 and 4/4 bars in it: that also gives the above error message each time ...
Sometimes the plugin disappears from view, while loading, but not always.
Loading the MGU with the disappearing GUI: I waited it out till all the yellow green popups are finished, if it works ... and only then bring up the VST: plays OK solo-ed sound and all. Starting Cubase playback: the bar indicator follows, but NO SOUND.
====> ONE IMPORTANT TIP: SHORTEN THE DISPLAYED NAME OF THE VST, (remove DAW PLUGIN f.i.) it doesn't always display fully in the inspector in CUBASE, the name is quite long compared to other VSTs IMO.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean