I would reinstall and see if you didn't get a bad install the first time.
Lenovo Win 10 16 gig ram, Mac mini with 16 gig of ram, BiaB 2022, Realband, Harrison Mixbus 32c version 9.1324, Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app, Komplete 49 key controller.
I have always had the following error message with 2019 on opening. "Windows audio session error, could not open bitstream. error -9997". (Is this the same error or do I need a new thread?) The error message disappeared after about seven seconds and did not affect the operation of the program. It was suggested by someone a few weeks ago and above in this thread, that it may be because the audio driver type was set to WAS. In my case this was the case and switching to MME solved the error message problem. However switching to MME introduced a lag in the editable notation window which was not there with WAS. I.e. clicking on the staves to insert a note did not result in the note sounding immediately. Not a large lag but enough to be an irritation. All other playback elements of the program with MME are perfectly in sync as they are with WAS. I can enter the notes quickly and this effect does actually slow things down. As things stand I can easily live with the error message and stick with WAS. I can see no obvious way to correct the lag with MME
First, welcome to the forum, nice to have you here!
A few questions if I may. First, are you using an external audio interface or the sound card built-into the computer? I assume you're editing MIDI data when you are using the editable notation window so what MIDI sound engine are you using; that might be an external hardware solution, or software like Coyote WT, Sforzando, Windows GS Wavetable or some other third party application.
Screenshots of your Band-in-a-Box midi and audio settings would be very helpful in better understanding the latency issue. While latency can not be eliminated, it can be minimized and some other users may have some ideas to test.
However, one last thought. Your post will be seen by more users if you start a new message thread.
I have nothing complicated. I am using 2019 64 bit with the settings I have always used in previous versions together with Coyote WT or Cakewalk TTS-1. I have no external equipment, midi or otherwise. Output is through the PC's sound card.
Taking Videotrack's advice I have installed some ASIO drivers which as expected have significantly reduced the "driver latency" and also removed the irritating lag when entering melody notes. The error message on starting when using WAS has also been eliminated.
So I now have a perfectly satisfactory system.
Why MME and WAS gave problems I don't know. I guess it's now a case of out of sight out of mind.
If the error was related to WAS (Windows Audio Session) then there will be a copy of the full error in the flash message log. There might also be accompanying errors messages that will provide more detail.
Help > Utilities > Display Log Text file of Yellow/Green Messages...
Error -9996 is sort of vague. It just means "invalid device" which could mean the audio device is using an incompatible format, or it is used exclusively by another application (eg. another program using it with an ASIO driver would prevent Band-in-a-Box from connecting to it).
To see more information about the driver format etc, go to Options > Preferences > Audio, and with WAS selected for Audio Driver Type click on [Audio Drivers...].
Just thought I'd mention that I've gotten that exact same Error -9996 or sometimes -9997, stating Invalid Device, when I've tried to use Audacity to record some audio. And I got this error AFTER Windows did an update! At this point Audacity (v. 2.3) doesn't see an ASIO driver, and it doesn't work with MME or WASAPI either (get the same error)... although it will playback fine, just won't record!
This is happening on two separate computers... one a laptop and another a desktop... that were working fine beforehand. They use different audio interfaces. Other programs seem to still work fine, although I can't test BIAB on the laptop. I even tried to use Waveasaur instead of Audacity, and it does the same thing.
The point of my butting in here was to mention that this error only showed up (for me anyway) after Windows updated. I've checked all the device settings, and record and playback settings in Windows and Audacity, per the instructions on Google for this error. They're all fine.
One last point is that a third computer, running Win7, is still recording to Audacity without any errors.
Not sure what MicroSoft did, but it sure seems as if some audio programs don't like it.
Again, just mentioning this in case you've gotten a Win 10 update recently.
Hope that this may help in your troubleshooting. Maybe?
Jim
BIAB 2020 with Reaper 6, on an AMD 8 core CPU, 16GB RAM, 240 GB SSD and 1 TB HD. Retired and trying to make some serious music, before Arthur Ritis spoils the fun.
You will probably need to look at Win 10's Security settings. Microsoft have clamped down on Privacy which means that it can disable soundcard inputs from being used. Look at Settings/Privacy/Microphone and enable the mic for use with whichever software that it doesn't work for at present.
You will probably need to look at Win 10's Security settings. Microsoft have clamped down on Privacy which means that it can disable soundcard inputs from being used. Look at Settings/Privacy/Microphone and enable the mic for use with whichever software that it doesn't work for at present.
Thanks! This is a great tip. I can reproduce the error Windows Audio Session error: Could not open stream. The error number is -9996 by doing the following:
1. open Settings in Windows 10 2. search for microphone privacy 3. set Allow apps to access your microphone to Off 4. launch Band-in-a-Box
Playback still works, of course, but recording will not.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.