BIAB 627 64 bit crashes with exit using a 4k monitor (3840 x 2160). Loads OK, and exits after 2 seconds ... there's no log entry. BIAB 627 32bit doesn't loading the same file & preferences settings.
fiddler, Interesting, I try to keep up with any 4K related issues, since I'm using dual 4K screens here.
Haven't observed any problem like this on my system (specs in signature), but good to keep this in mind just in case! Looking at the Properties page, for BIAB 64-bit, I do not have either of those high DPI settings selected. I've always used Windows scaling set to 150% also. Best of luck,
Jerry 2019 BiaB Megapack (634), RB 2019 (Build 4) Reaper 5.983 x64, Audient id14 USB interface, Voicemeeter Potato 3.0.0.8, Nektar LX49+, Roland E20 i7-6700K Skylake desktop, 64bit Win10 Pro(1903), 32GB ram, 512GB system SSD + 2TB data SSD
OK, good! Yes, I agree the Menu / system fonts are scaled too small, even at 150%, but otherwise looks OK. Seems to be a common problem with a lot of programs, I'm not sure what the solution to that is, other than BIAB having a setting programmed in to handle that.
Jerry 2019 BiaB Megapack (634), RB 2019 (Build 4) Reaper 5.983 x64, Audient id14 USB interface, Voicemeeter Potato 3.0.0.8, Nektar LX49+, Roland E20 i7-6700K Skylake desktop, 64bit Win10 Pro(1903), 32GB ram, 512GB system SSD + 2TB data SSD
Just discovered that some GUI interfaces seem also slightly blurry, like Toontrack EZkeys, while others are OK. Reading on forums it seems a lot has to do with graphic cards drivers not coping with 4k HDMI that well ....
At least i was advised replace the AMD Radeon r7 360 (with HDMI port) is not too compatible, and get a Nvdia 1050 Ti as minimal possible solution instead.
Fiddler, Had some time to dig into this a bit more, here's a bit of a workaround that might work for you too.
I'm using Nvidia GTX970 graphics card, outputting to 2 Vizio 43" TVs through HDMI, both at 3840x2160/60p
(trying to add files, not sure how that will come out!) In my Nvidia control panel, I have a setting to "Adjust desktop size and position" and it allows me to choose "Perform scaling on" where I can choose GPU or Display. I'm using (forcing) the GPU to do scaling, rather than the Display. Works great.
In my Windows Display Settings, I normally have both set to 150% scale, and under Advanced Scaling settings, I turned ON the blur setting (Let Windows try to fix apps so they're not blurry) Custom Scaling is left blank, it affects all displays, might be useful if you have some oddball percentage, which I'm not doing.
If you go a little further, at the very bottom of the Display settings page, there's a link to "Graphics settings". Here, you can choose to customize performance (GPU again) for either "Classic app" or "Universal app" (STore apps!) I left mine on Classic app. So far, so good, everything works fine, except small Menu text on apps.
The workaround, is to set my secondary display scale setting to 200%, and leave the Primary display scaled at 150%. You can do this "on the fly", it takes effect right away, and BIAB is scaled very nicely, no blur, and easier on the eyes! LOL
I have several video editors, where I prefer to have both displays scaled the same amount, to 150%, so I just switch it back, and works fine. WIth a single monitor, just keep in mind that if you change scaling, it'll affect all programs, which may or may not be an issue. Hope this helps!
Jerry 2019 BiaB Megapack (634), RB 2019 (Build 4) Reaper 5.983 x64, Audient id14 USB interface, Voicemeeter Potato 3.0.0.8, Nektar LX49+, Roland E20 i7-6700K Skylake desktop, 64bit Win10 Pro(1903), 32GB ram, 512GB system SSD + 2TB data SSD
I'll look into that, before getting another graphics cars .... And then got me another better suited nvdia one LoL.
UPDATE: now connected with a Display Port cable, new nvdia 1050 ti card .... some plugins and programs are still blurry; guess it's windows 10 scaling that sucks here ...
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.