Log in to post
|
Print Thread |
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
To improve a song, I did another mixdown and master. The result was a song that was too loud and in the red consistently. Has that clipping become a permanent part of the audio? Should I start over from the protected original or try to fix with remaster/remix?
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2000
Posts: 12,580
Veteran
|
Veteran
Joined: Dec 2000
Posts: 12,580 |
I would go back to the source and redo. That being said, there are audio editors that can help remove the clipping, but it's better to go back to the source.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2024/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2013
Posts: 2,732
Veteran
|
Veteran
Joined: Dec 2013
Posts: 2,732 |
You won't be able to edit wav files saved in the clipped format. You'll need to go back to whatever level you were before boosting the signals. We would need more info on what software was in the chain as you went from your final mix to mastering, etc.
Steve BIAB/RB 2022, Pro Tools 2020, Korg N5, JBL LSR 4328 Powered Monitors, AKG/Shure Mics. PC: Win11 PRO, 4 TB M2 SSD, 2 TB HD, 128 GB Memory
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
Thank you for that. I had earlier tried a remaster. The results were not good. This are BiaB WAV renders mixed down in Reaper and rendered to two tracks. So far, so good. I transfer them then in real time to a Tascam digital recorder which has mixdown and master modes. Usually, it works out all right; but, this time, the level got out of control. (i.e. I lost it.) Thanks for the advice. I'll go back to the original files and transfer them anew.
Last edited by edshaw; 10/10/19 01:10 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 10,099
Veteran
|
Veteran
Joined: Aug 2011
Posts: 10,099 |
edshaw,
One way to think of clipping is to imagine each wave file sample as a bucket. When there is clipping each clipped bucket fills to overflowing and spillage occurs. What's spilled is lost and can not be recovered.
Restoration software looks at adjoining samples and calculates from the good samples what the lost information might be but it is just an approximation.
Jim Fogle - 2024 BiaB (1109) RB (Build 3) Ultra+ PAK Cakewalk - Zoom MRS-8 recorder Desktop: i7 Win 10 build 2004, 12GB ram 256GB SSD, 4 TB HDD Laptop: i3 64bit Win 10 build 21H2, 8GB ram 500GB HDD Music at: https://fogle622.wix.com/fogle622-audio-home
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 25,797
Veteran
|
Veteran
Joined: Jul 2000
Posts: 25,797 |
Yes, do it over. It’s time wasted to attempt to work with a file with clipping.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
Thank you for that. Interesting illustration, Jim. I had intuited that the file had been maimed. Yes, Matt, as you know, I've spent energy on building a standardized file system. Times like this, glad I did. (Not that I'm not capable of creating the random birds nest here and again.)
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2016
Posts: 1,169
Expert
|
Expert
Joined: Dec 2016
Posts: 1,169 |
Whenever I render a BIAB song I do so to individual tracks. Then when I pull the tracks into Reaper (or Cakewalk) I normalise all tracks to about -12 dB. That gives me a starting point. From there I get each track to how I want it then put the entire mix through a limiter set with a ceiling of -1.3 dB (I usually put mine to MP3). I use the limiter to get me to about -14 or so LUFS. This avoids any clipping and delivers a consistent level.
There are many good Youtube videos on Gain Staging. These are worth a look.
My thoughts Tony
Last edited by Teunis; 10/10/19 01:55 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
Thanks, Tony. I import my BB WAVs into Reaper, too. So, your remarks give me something to go on. If I follow your directions, it could mean fewer problems in the Tascam mastering process, which involves working with eight little bars on a tiny screen.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2016
Posts: 1,169
Expert
|
Expert
Joined: Dec 2016
Posts: 1,169 |
I should mention I set up the action Xenakios/SWS Normalise selected takes to dB value... I set this to Shift N. So all I do is pull in all the tracks - make sure they are all selected - press <shift N> and a box appears where I enter a value eg -12. Very simple, very quick.
Just make sure you have the SWS extensions installed in Reaper. The SWS extensions give Reaper a lot more capabilities.
Tony
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2011
Posts: 13,976
Veteran
|
Veteran
Joined: Dec 2011
Posts: 13,976 |
Your DAW doesn't indicate clipping on each track and the stereo buss?
Bud
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 21,609
Veteran
|
Veteran
Joined: May 2000
Posts: 21,609 |
Bud, Sounds like his DAW is a hardware device. .. are BiaB WAV renders mixed down in Reaper and rendered to two tracks. So far, so good. I transfer them then in real time to a Tascam digital recorder which has mixdown and master modes. Usually, it works out all right; but, this time .. Your question is still valid, but just pointing out what he is left to work with in the hardware unit may not be the familiar tools/features/flow we are used to having in a DAW.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2011
Posts: 13,976
Veteran
|
Veteran
Joined: Dec 2011
Posts: 13,976 |
Thanks. I need to read a little more carefully! Having said that I thought Reaper was a DAW?? Why not throw a limiter on the mix and output it via one of nowadays industry standards, e.g., CD, streaming, the LUFS thing, etc. Bud
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,056
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,056 |
. . . If I follow your directions, it could mean fewer problems in the Tascam mastering process, which involves working with eight little bars on a tiny screen. Which Tascam Digital recorder do you use?
BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
I use the 8 track DP-03 SD, Charlie. The main thing keeping me from upgrading to the DP-24 is the size. I use it as my combination mixer/bg track player when I go out into the field. Everything is right there. The more I go along, the more I find those little bars are all you need -- fat but not peaking, tracks easily adjusted in the final mixdown. It has bounce, mixdown, and master; cut, copy, and paste. Mixdown makes bounce virtually redundant, but still is handy to have around. Take the vocals, for example. They can be mixed and mastered, then imported back into the project. I have basically three elements: voice, guitar, BB track. Once the vocals have been mastered, it is hard to go back into the track, so you have to keep a protected original, just in case. Lately, I've been using the ol' movie editor's trick, A and B rolls, especially useful for obtaining the same results as a punch in. A C roll can be used as a scratch track, same idea as a cue track. Is this information helpful to understanding my situation? Thank you and the others for taking the time to help me with this. I know most here rarely use the old style recorder.
Bud: ("Your DAW doesn't indicate clipping on each track and the stereo buss?") Yes, I should have caught it, but probably thought I could correct it later by turning down the volume. Not.
Last edited by edshaw; 10/12/19 02:52 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2013
Posts: 8,056
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,056 |
The 8 track DP-03SD is a very good unit and competes well with the DP24/32 in my opinion and unless you do live recording or have a dedicated home studio, it beats the socks off the Model 16/24. I am one that truly enjoys stand alone digital recorders and Tascam seems to be my favorite brand. I don't currently have a DP-03 but do have a DP-004 and DP-24. I had several cassette Portastudios and also the Neo2488MKII. Never had a crash with any of them.
I agree with the others to restart from scratch rather than attempt a repair. They've given you good advice and the only thing I'd advise you regarding mixdown and mastering on the hardware is the reminder that during these actions, the channel meters display the recorded audio on the track and not the fader position as it does during track recording. The OL lights indicate input and not track levels so there may not be clipping to any of the individual recorded tracks. The effects you use during mixing and mastering effects all add gain to the mix. EQ, compression, reverb are all cumulative gain. Leave plenty of headroom on your tracks before you do your mix.
BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
Thanks for that, Charlie, and thanks to everyone who chipped in to help. I did a song today, after rebooting to the BB WAV render. The process flowed way smoother and the results were much improved. While not many of us still use the digital recording hardware, the fundamentals are consistent and each comment added to my understanding. With experience, I'll get that headroom doped. That's really when the trouble started -- the compression phase. You know, the bars temporarily disappear throughout, ironically, when you need them most. The ears remain open, though. Tuenis, I'm into that YouTube instruction area. Thank you, had no idea such an intense community existed!
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 9,301
Veteran
|
Veteran
Joined: Apr 2009
Posts: 9,301 |
Yep start over from the original tracks...or the unadulterated master. Assuming it is not clipped from compression.
You can't unbake a cake. So don't use the clipped file and try to fix it.
Clipping comes in my mixes from running the compression too high or pushing the mix with my Boost FX. I call them "overs" where the signal exceeded zero dB... hitting the top of the digital limits. In extreme cases, you end up with bricked files. In other cases, the overs can cause nasty sounding digital distortion. The way I mix, I have to go back to my original project and turn my compression down. It's amazing what a few dB reduction in compression can do to open the mix and let it breathe.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Oct 2016
Posts: 1,558
Expert
|
OP
Expert
Joined: Oct 2016
Posts: 1,558 |
Thanks for that, Herb. With the help of this forum and a lot of patience, I've been able to see some progress in the final results. EQ and COMP still have grey areas for me. As a hands-on learner, the only real course is to keep on keeping on. All information from they who been there is vital and appreciated.
Last edited by edshaw; 11/04/19 03:37 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2009
Posts: 9,301
Veteran
|
Veteran
Joined: Apr 2009
Posts: 9,301 |
Thanks for that, Herb. With the help of this forum and a lot of patience, I've been able to see some progress in the final results. EQ and COMP still have grey areas for me. As a hands-on learner, the only real course is to keep on keeping on. All information from they who been there is vital and appreciated. compression and loudness boosters will put you over the line quicker than anything else. The important thing is to keep the dynamics in the music. I always use a wave editor so I can look at the finished wave. If it looks like a flat top wave, where everything is extremely level, I will go back to the original project in Sonar and look for my mastering plugs and see which compressor I have turned up a wee tad too much. I like to see hills and valleys in the wave. That lets me know I don't have the dynamics squished out of the music. I really only like to see my peaks touching 0dB in one or two places and nothing that is an "over". Any time I have a mix where I have to put a booster (like Boost11) into my vocal signal path, I know one truth. I have everything else too loud. So it's time to turn down the band rather than trying to bring the vox up. Trying to boost the vox will result in overs and a brick looking wave on export. A quick, handy, DAW trick, is... rather than going back through all the instrument tracks and lowering them....especially if they have volume envelopes... as that can be a tedious task.... I will simply pop in another BUSS and call it BAND.... and send all the instruments to it. All the volume changes are kept intact, and now, I can lower the overall band volume while leaving the vox at a good level.
Last edited by Guitarhacker; 11/05/19 05:44 AM.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Congratulations to the 2023 User Showcase Award Winners!
We've just announced the 2023 User Showcase Award Winners!
There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Thank you to everyone who has contributed!
Video: Volume Automation in Band-in-a-Box® 2024 for Windows®
Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.
Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist
Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®
New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®
Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,390
Posts732,456
Members38,441
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|