I have 7 sessions of video/audio presentations each being 3 hours long. Does anyone have any ideas of a simple and time effective way to apply compression to the audio?
The files are roughly 1 to 1.5 gig each. Not terrible; but not overly simple to work with at times either.
Some of the speakers are fairly loud and project well. Others are more quiet. And of course the MC does a few LOUD shout outs to the crowd.
Any help/suggestions would be greatly appreciated.
Last edited by HearToLearn; 10/17/1905:20 AM.
Chad (Hope that makes it easier)
TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Unfortunately, unless you have a supercomputer, you will probably need to break those 7 clips down to more clips to allow you to open them in the DAW that you use. Whatever compression settings you end up using, you'll need to save those to a preset so you can apply them to the other clips. What video editor are you using? Are you just splitting the audio out in your video editor, then handling the compression in an audio editor? Does your video editor have an audio tool to handle compression right in there so you don't have to use a separate DAW?
Looking forward to hearing your responses on this.
Hi I guess that is the video size not the sound file. As Steve says this is some task , Do you still have the sound available from a separate track in the original videos, Was it ever available post video production as an audio recording or did the camera embed it in the video. Or has it already been rendered into the composite video MP4 file or what other movie format you use.
Worse case would be to record the sound off the clip then work on the audio do not change its time of cut in any way . but you should be able to compress . You would then have to make a new Video from your original with the sound muted, Then overdub your new Audio in Sync. This is why it is so important not to edit the sound or video while they are separated. Let us know how you get on Mike
Once the audio is broken out from the video and open in your preferred audio software program.
Here's how I think I'd approach it with the information you've provided so far:
. Set your DAW's waveform zoom levels so you can easily distinguish between high passages and low passages in the waveform. . Highlight the higher passages and apply negative amplification to lower the gain of the high section to be more in level with the lower sections without losing vocal clarity. It's trial and error. Use your ears and work your way through the entire file. In this step, you're manually adjusting the overall track gain. . Normalize the entire file to -6 to -12 db . Lightly compress the entire file to further tame peaks and gently level the amplification edits. . Apply a limiter to bring the overall level up.
This should allow you to equalize the volume levels without raising up the noise floor and ambient background noise to much.
Worse case would be to record the sound off the clip then work on the audio do not change its time of cut in any way . but you should be able to compress. You would then have to make a new Video from your original with the sound muted, Then overdub your new Audio in Sync. This is why it is so important not to edit the sound or video while they are separated.
Mike, I'm a little confused on your answer on this one. Some of the video editors I've worked with allow you to split off audio from the video clip so you wouldn't have to lose a generation of the original to a copy. I swap in updated audio files all the time with Cyberlink Power Director video tool. That one also has a nice audio sync feature that allows you to sync up original and edited audio tracks to the frame before you delete the original.
HI Steve Yes indeed some video editors are very good, at teasing it out. But getting hold of the audio separately from some previous merges and interleave into the video, Is not always easy. Great if you have a separate in sync Audio recording from the film but that’s the stuff of movies and Clapperboards lol. Spent a bit of time as a film extra over the years on odd occasions. So a bit spoilt for sound on film and video production. None the less the original task should be a possibility with care.
Ok, reporting back. I ended up using a number of ideas from the post. Overall, I simply dragged each video into a daw, added compression to the audio track end exported with the effect. Then I imported that track into the video editor and muted the original audio track. It was very easy to line up because I didn't change anything in the audio beyond compression.
It really is one of those pull it in, walk away, save and walk away. It takes time for sure.
I used less taxing software to help speed things up...Reaper and Vegas. I'm running Win 10 w/ 64 Gig of ram, so not the most but not a Timex Sinclair 1000 either. I'm hoping some of you will laugh at that.
Thank you VERY much for the helpful suggestions. I, at best, had ideas. It's so much better starting with words of wisdom like I got here. Experience is type of thing. I greatly appreciate it.
Chad (Hope that makes it easier)
TEMPO TANTRUM: What a lead singer has when they can't stay in time.
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.