I'm using a focusrite scarlett solo usb interface. It is essentially my "soundcard" and installed PnP with no issues and has worked well (except for rare driver drop-outs easily corrected).
However, when attempting to record in Reaper (something I have never done yet), there is a serious lag between sound entry and hearing my vocals in the headphone monitors--something in the area of a second or maybe even two. I expect such a lag would be in the recording as well, but I haven't tested that out.
I am guessing there is some setting I have not set correctly, even though Reaper recognizes my Scarlett solo as the audio input device. But I don't know WHAT settings, nor if they are settings for the Scarlett in Windows 10 or settings in Reaper.
In either case, I am at a loss as to where to look, what to look for, and what (if anything) to change--not in Windows 10 and not in Reaper.
If you have a clue, please go easy with me on the techno-babble. I'm barely a musician and not at all a technician.
The computer is almost new and should be powerful/fast enough to handle what I'm throwing at it. I've recorded on 1/4 this machine without issues.
Life rarely allows me to do anything easily the first time, so this is what it is. I hope I can easily remedy this and record as easily as I once did in Acid Pro. Frustration levels are high, and I'm not going to fight this forever. Nobody wants to hear me sing any more than I do.
ps. Please don't get me started on trying to record in BIAB. I can't seem to even get so far as sending a signal there.
I use a Focusrite here, Scarlett 2i4, and also use Reaper.
I have no latency when recording guitar parts, but I also record them dry, i.e. no FX on the track. I add the FX after the track has been recorded. I think, but don't know for sure, if I attempted to record and also add FX at the same time I would get latency, could that be your problem?
I also monitor using the headphone jack on my 2i4.
The only thing loaded were the BiaB tracks. No Effects. I have 8 G RAM.
Noel, that option was checked, but I unchecked it and checked it again and applied that change.
Teunis, done. I'll check all this out later, but the last I tried, I could arm a track for recording, but when I pressed record, no progress was shown.
I have a 2i2 I use to carry around when needed. We also have a couple 18i20s when in our usual locations. Make sure, as Teunis noted, to have the ASIO driver for the Focusrite selected. If that causes other problems, it's OK, those are fixable too. Stick to it & proceed down the path of getting it set up right, you'll be happier in the long run.
Also make sure your monitors or headphones are using the Focusrite out, not the computer out. That physical connection on the computer is tied to system drivers that will cause this problem. Even though Reaper may show correct drivers, as soon as you connect to the internal card you've introduced a likely problem. OS routing won't show in Reaper. In this scenario, Reaper would be sending a proper signal back to the Focusrite, but the OS has tapped it along the way and is adding latency from the onboard device drivers. Eliminate those.
Make your sound your own! .. I do not work here, but the benefits are still awesome
Headphones are plugged into the appropriate jack on the Scarlett and have been since I installed it.
Does the "direct monitor" switch position have anything to do with this...and where should it be when I'm trying to record and listen to backing (and to my vocals).
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean