Previous Thread
Index
Next Thread
Print Thread
Go To
#613511 09/03/20 04:43 AM
Recording, Mixing, Performance and Production
Joined: Jul 2017
Posts: 201
Apprentice
OP Offline
Apprentice
Joined: Jul 2017
Posts: 201
Hello fellow recordists! I recently had victory over frustratingly intermittent audio drops with a Windows 10 64-bit PC (Dell 8930). Thanks to the kind and knowledgeable folks here, on the SOS forum, and others, I compiled a list of possible conflicts that I thought might be helpful to those experiencing similar issues. In my case, I was using a Focusrite Scarlett 2i2 and Mixcraft Pro Studio 9, plus BIAB/RealBand. In the end, however, the problems lay squarely with Windows settings and Dell's contributions. Unfortunately, I can't say exactly what finally fixed it, but there were cumulative improvements along the way. Here then, is my list of suggestions.

• Be sure that you PC’s BIOS and OS are up to date

• Check in Device Manager, that devices have current drivers. You may find System Firmware, Network Adapters, etc. could be updated

• Windows’ generic HD audio driver is superior to the Realtek driver for WAVE or WaveRT

• For ASIO audio interfaces, plug directly into a USB port, not a powered hub. If a USB 2.0 device, plug it into a 2.0 port (best to avoid 3.0). Be sure your USB cable is healthy

• Set audio to 44.1K 24-bit

• A 256 samples buffer size should suffice on modern PCs for recording and initial mixing. Increase to 512 MB towards mixdown if needed

• Be sure your DAW settings match your interface’s and Windows’ settings

• Use a High-Performance power scheme, being sure that no drive(s) in use can sleep or compress
• In Device Manager, be sure that no USB port can sleep

• Uncheck ‘Allow applications to take exclusive control of this device’ anywhere it appears (Properties)

• Consider disabling unused audio devices (i.e. audio on graphics cards [NVIDIA, Intel])

• Consider disabling any used GPUs (graphics cards [e.g. if you have more than one card for gaming])

• Remove or disable your PC manufacturer’s ‘bloatware.’ While a diagnostic might be useful at times, they can negatively impact a recordist. Classic suspects are Dell’s SupportAssist and SupportAssist Remediation services, which can be disabled in the Task Manager

• In Task Manager, limit the apps that start up automatically. If you don’t need them at startup/reboot, set them so that they must be opened manually when needed

• Known resource ‘hogs’ include Skype, and NVIDIA GPUs

• Many recordists will disable their network adapter and antivirus while recording/mixing

• Install LatencyMon (LatMon) from Resplendence to check your system’s latency: dxgkrnl.sys, Wdf01000.sys, msmpeng.exe, and nvlddmkm.sys are drivers commonly called-out by LatMon as problematic


Best, Warren

Warren A. Keller- Woodwindist/Producer
Spontaneous Groovin' Combustion
Tune 9 Music- SESAC
Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,799
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,799
This is good. A suggested clarification for this: plug directly into a USB port is, plug directly into a USB port (use a port on the back of the computer if you have a desktop)


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2006
Posts: 1,574
L
Expert
Offline
Expert
L
Joined: Dec 2006
Posts: 1,574
Good points. I've had issues with using USB ports at the front of my PCs.


Windows 10 Home 20H2 Build 19042.487
BIAB 2021 (Build 818)
Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor
Zoom UAC-2 (USB 3 interface-built in midi)
VoiceLive 3 Extreme, Sputnik Valve Condenser Mic
Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 2,366
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 2,366
This is the one that caught my eye: • Uncheck ‘Allow applications to take exclusive control of this device’ anywhere it appears (Properties)

I've read conflicting reports about this. Anybody have an insight into this setting?

Jeff


Win11, Intel i7 7700K 4.2Ghz, 32Gb RAM, 2x1Tb HD, 500Gb NVMe, BIAB/RB 2024, MOTU 828MK3 audio, MOTU Midi Express, Yamaha Montage 7, DX7II, TX802, Motif XS Rack, Roland Fantom XR Rack, Oberheim Matrix 1000, VoiceLive3 Extreme, Kontakt 6, SampleTank 4.3
Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,799
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,799
I do not allow any applications to take exclusive control of a device. So far, that has not caused a problem.


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: May 2020
Posts: 1,629
PG Music Staff
Offline
PG Music Staff
Joined: May 2020
Posts: 1,629
We generally recommend not to allow applications to take exclusive control of a device - often this is the fix for audio issues in Windows 10.


I work here
Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,799
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,799
Simon, welcome to the forum. Thanks for confirming.


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2011
Posts: 2,366
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 2,366
Yes, thanks Simon. Appreciate your help and insight into this issue.

Jeff


Win11, Intel i7 7700K 4.2Ghz, 32Gb RAM, 2x1Tb HD, 500Gb NVMe, BIAB/RB 2024, MOTU 828MK3 audio, MOTU Midi Express, Yamaha Montage 7, DX7II, TX802, Motif XS Rack, Roland Fantom XR Rack, Oberheim Matrix 1000, VoiceLive3 Extreme, Kontakt 6, SampleTank 4.3
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®

New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!

This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!

When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.

Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video

The new Band-in-a-Box VST DAW Plugin Verion 6 adds over 20 new features!

Watch the new features video to learn more: Video: Band-in-a-Box® 2024 - DAW Plugin Version 6 New Features

We also list these new features at www.pgmusic.com/bbwin.plugin.htm.

Forum Statistics
Forums66
Topics81,394
Posts732,489
Members38,441
Most Online2,537
Jan 19th, 2020
Newest Members
zagrajbarke, Ernest J, Izzy, BenChaz, Csofi
38,440 Registered Users
Top Posters(30 Days)
MarioD 195
Al-David 124
DC Ron 112
dcuny 87
rsdean 82
Today's Birthdays
CeeDee, SethMould
Powered by UBB.threads™ PHP Forum Software 7.7.5