..How about being able to swap upper bar with song block view? see attached.
With all the new tracks and users wanting them to converge with standard tracks there could be accessed from the Bars window or Mixer. This way as you say you could display the song regions and clicking that region it would zoom it, and it would work like a Tab that Old Muso wanted:
To keep the option to show Tracks or Regions we can make the Track scroll to show them all, and when you mouse wheel over it, it will scroll left/right and do the same with the regions display, arrow at each end and mouse scroll: Full Screen
All these mock ups, I think it would have been quicker doing the code. So you could have the top bar view config on the left and the C7 drag Midi chords with region name markers or chord name markers, configured by right click. What else does it need ?
going back to bars view for a moment, i feel there would be less "toing" and "froing" between daw and biab if bars view were enhanced BECAUSE bars view lets one move bits of midi and audio around so very easily. and "experiment" at different time slots. there is just so much arrange flexibility in bars view.
one minor thing. i feel slide is a far more flexible feature then push. cos in the past if i couldnt get push to work the way i wanted, what i would do is "slide" the bit of midi from biab in the daw.
nice ideas pipeline. but will we ever see them implemented ?
..going back to bars view for a moment, i feel there would be less "toing" and "froing" between daw and biab if bars view were enhanced BECAUSE bars view lets one move bits of midi and audio around so very easily. and "experiment" at different time slots. there is just so much arrange flexibility in bars view.
one minor thing. i feel slide is a far more flexible feature then push. cos in the past if i couldnt get push to work the way i wanted, what i would do is "slide" the bit of midi from biab in the daw....
What do you need "ENHANCED" in Bar view ?
I put a slider in Rusty's F5 to "Slide" the Push & Holds is this what you mean ? Full Screen
Currently the Util Tracks are just able to generate RealTracks using the Soloist RT generator window. You will need all the Generate options RT RD MST UT Loop.. with the Multi Tab Picker , when you right click "Choose Instrument Change for Selection" it will bring up the Multi Tab Picker. So in the pic it will show where there is a track change and the name, the name will be offset if there is a Hold Shot etc.. So I can select the bars where the UT changes and Regenerate any section of the UserTrack same with RT RD MST. Loops can be changed also in F5 or right click this will allow for another Loop or some Loops come with Holds Shots n Endings, so you can add these in. I have asked for Hold and Ending in the Loops dialog to set the associated Hold and Ending wav file.
What else do you need in the Right click dialog ? Full Screen
Another thing that came to me was the word Degenerate, this could allow you to go back anytime select a section that was previously generated over and select Degenerate to get the old one back as the new one is %^&* and the old was better.
Degenerate huh? I was thinking about something similar too, but in slightly different angle. To "generate a copy" straight to another track (Utility for example) or even better to "first available empty track", if they will have same functions as legacy tracks. That way you can hear both generations without having to re-generate anything and if you like parts of one and parts of other, you can keep both and mute things you do not want.... or delete one ... or..
Merge two tracks into one... keeping all the bar settings of each. With some kind of easy, "user friendly" mechanism. Select tracks right on mixer-> right click> merge selected.
I'm not sure if undo would put it back in but this way you can still do it even after other undos.
Yes, you can take it further than the simple Degenerate. Be able to select from previous generations with a right click even. If they can get over to that Play Direct method it would be just be storing the track section data from the previous generations that you can select from and it would instantly play it without it being in other track.
This showed up in a another thread and I tested it. You cannot Undo a Regenerate.
The workaround would be to keep saving versions under different names so you could always go back to a previous file. But as for a Degenerate function, +1.
As long as it refers to the program and not me.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Maybe a User Selectable Option that could be used so that every time a new generation is created, a backup is automatically created of the existing song, with an incremental file name convention: MySong_001.MGU MySong_002.MGU MySong_003.MGU MySong_004.MGU MySong_005.MGU etc...
This could be automatically saved in a 'backups' sub-folder from where the original song was loaded from. e.g. C:\MyMusicSongs\Backups\
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Another thing that came to me was the word Degenerate, this could allow you to go back anytime select a section that was previously generated over and select Degenerate to get the old one back as the new one is %^&* and the old was better.
Originally Posted By: huertaaj
I pressed the Play+ button which generated a new version of the guitar RealTrack. I didn't freeze the track and now I can't go back to a previous version that I liked. No matter how many times I have pressed the Play+ button it just won't generate that same nice version again. Is the ANY way to control how BIAB generates a new version of the track each time you press Play+? If not, this is kind of sucky.
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.