Previous Thread
Index
Next Thread
Print Thread
Go To
Songwriting
Joined: Jun 2021
Posts: 1
L
LRC Offline OP
Newbie
OP Offline
Newbie
L
Joined: Jun 2021
Posts: 1
Can any one address an issue with adding drums? Is there any way to isolate individual drums? For example if You wanted to increase the volume of only the kick drum for a part of a song.

Songwriting
Joined: Apr 2017
Posts: 1,192
Expert
Offline
Expert
Joined: Apr 2017
Posts: 1,192
In BIAB, No. In any DAW or sampler? Yes. Can you use a DAW to sample Real Drums? Addressed in this thread today:

Drums in BIAB


BIAB 2023 Audiophile, 24/60 Core M2 Mac Studio Ultra/8TB/192GB Sonoma, M1 MBAir, 2012 MBP
Digital Performer 11, LogicPro
Finale27.4, Dorico5, Encore5, SmartScorePro64, Notion6, Overture5
Songwriting
Joined: Dec 2011
Posts: 13,978
Veteran
Offline
Veteran
Joined: Dec 2011
Posts: 13,978
You can in A DAW as Mike alluded to but it is a bit tedious.

In the folder for each RD there is an audio file of the RD and at the end of that file there are separate hits for each drum kit component which you can use an editor to cut out. I often use the snare and crashes cymbal to double those in the RD and I can put my own processing on them. With my DAW it’s very easy as you can lock them to the Rd track with the Groove Track function - I assume other DAWs have a similar function.

You can also use EQ to lessen the volume of the component you are doubling in the full RD track.

And you can volume shape, for example, the snare down throughout the track. I do this on a section and then copy the volume automation lane across the track.

Yes tedious but it works. And a big advantage is that you are using the same hit by the same drummer on the same kit as in the RD. And it’s possible to use those hits to build your own intro or outro or fills.

And simply doubling the kick or snare and nothing else allows you to increase the volume and add your fx. I’ve done this for years FWIW.

Bud

Songwriting
Joined: Apr 2017
Posts: 1,192
Expert
Offline
Expert
Joined: Apr 2017
Posts: 1,192
There is one advantage to using a commercial library in a DAW to enhance or add drum tracks over sampling the BIAB hits. The BIAB Drum hits at the end are sampled at one velocity. Commercial drum library hits are sampled at multiple velocities—like real life, the tone of a drum changes when it is hit harder or softer.

In addition, you have round-robin where multiple hits on the same drum use different samples to mimic drummers do not hit the same spot each time. BIAB Real Tracks/Drums, by using real drummers, does that part well on the tracks but the hit samples at the end of the tracks cannot.

Since BIAB tempi are quantized, it's easy to build a tempo map in any DAW and add a drum track using a commercial library. The down side: it is additional work and the best results are obtained by thinking like a real drummer.

There's another option. Drumagog ($99-$199), Slate Trigger ($149) and others have drum replacement apps that can hear the BIAB Drums and let you substitute other libraries. The apps include a few and you can buy add-ons or switch to other libraries. You do this in a DAW, of course but, if you like the playing on a track but not the actual samples, there's your solution without having to program a track from scratch.

I do all of the above in my work.

Some of the commercial libraries are inexpensive while others cannot be justified unless you have a film budget to charge them against. Many DAWs include basic libraries that are ok but it's the 3rd party stuff that gets deep into multi-velocity and round-robin.



BIAB 2023 Audiophile, 24/60 Core M2 Mac Studio Ultra/8TB/192GB Sonoma, M1 MBAir, 2012 MBP
Digital Performer 11, LogicPro
Finale27.4, Dorico5, Encore5, SmartScorePro64, Notion6, Overture5
Songwriting
Joined: Apr 2009
Posts: 9,301
Veteran
Offline
Veteran
Joined: Apr 2009
Posts: 9,301
Some of the drum synths will automatically give the option to use a stereo track for the drums or to use multiple tracks. If you have a synth in your DAW which is capable of multitrack output... the solution is easy. Just use volume envelopes on that track/part of the kit.



Barring that and when you are working in BB/RB where you only get one track with all the drums in it.... you can do a sort of a workaround by using EQ and accenting the lows for example if you want the kick to stand out or the mids and highs to accent the snare and cymbals.... but that kind of control is limited in it's usefulness.


You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.
Songwriting
Joined: Oct 2016
Posts: 1,558
Expert
Offline
Expert
Joined: Oct 2016
Posts: 1,558
My ignorance in this area is not keeping me from commenting and asking, 1) Isn't is a little unorthodox to tweak the drum track after the fact? I mean, it seems to me the drum track is the first thing to be established, then the primary rhythm including chord changes.
That said, I can easily see how issues could arise synching the lyrics with the rhythm, especially when the emphases don't match. Just asking, really.
(I might think the astute BIAB user would also be proficient in drum machine.)


Last edited by edshaw; 06/09/21 09:44 AM.

Link: www.soundcloud.com/ed_shaw (Feel Free to Use)
https://drooble.com/edward.shaw/hymn/index.htm
Biab for WIN 2020 -- Win 10 64bit -- Reaper/Audacity
Zoom R-16 -- Tascam DP-03-SD -- SoundTap -- Crescendo --
Songwriting
Joined: Dec 2003
Posts: 20,645
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 20,645
Originally Posted By: edshaw
My ignorance in this area is not keeping me from commenting and asking, 1) Isn't is a little unorthodox to tweak the drum track after the fact? I mean, it seems to me the drum track is the first thing to be established, then the primary rhythm including chord changes.
That said, I can easily see how issues could arise synching the lyrics with the rhythm, especially when the emphases don't match. Just asking, really.
(I might think the astute BIAB user would also be proficeint in drum machine.)



Hi Ed,
FYI
There has been a number of times BobH and I have been recorded live. That means two guitars and singer(s) going into one track. We do this just for fun but sometimes it really sounds good so I will add a drum track, a bass track, and maybe some other tracks. Since these are recorded without a click track I do all of that work in my DAW, usually playing live with my bass and MIDI controllers. The drums are either MIDI drum loops (BiaB drums or other companies) modified to match the tempo changes or inputted via drum pads.


Me, it's not about how many times you fail, it's about how many times you get back up.
Cop, that's not how field sobriety tests work.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Songwriting
Joined: Aug 2011
Posts: 10,099
Veteran
Offline
Veteran
Joined: Aug 2011
Posts: 10,099
Ed,

Sometimes people create a basic drum track to keep time while recording the rest of the tracks in a song. After the song tracks are created there may be a desire to make the drum track fit into the song better by changing the volume, tone or mix of the individual drum instruments throughout the song.


Jim Fogle - 2024 BiaB (1109) RB (Build 3) Ultra+ PAK
Cakewalk - Zoom MRS-8 recorder
Desktop: i7 Win 10 build 2004, 12GB ram 256GB SSD, 4 TB HDD
Laptop: i3 64bit Win 10 build 21H2, 8GB ram 500GB HDD
Music at: https://fogle622.wix.com/fogle622-audio-home
Songwriting
Joined: Oct 2016
Posts: 1,558
Expert
Offline
Expert
Joined: Oct 2016
Posts: 1,558
What Mario does with his controllers is out of this world. But I'm not talking about adding an instrument or vocal track to a work in progress. What I should have said was that I recently paricipated in a collab where people were members of a digital choir. (Everyone has seen the "around the world" team efforts.)
The producer didn't have a strong basic rhythm track and his vocals were all over. He somehow thought a click track would help. Now, I'm not one to sound a discouraging word, but his result would have been so much better had he a strong drum track, even if he eventually deleted it. These thoughts were fresh in my mind when I asked that question.
It was painful, really, to listen and listen and try to follow.

Last edited by edshaw; 06/09/21 09:54 AM.

Link: www.soundcloud.com/ed_shaw (Feel Free to Use)
https://drooble.com/edward.shaw/hymn/index.htm
Biab for WIN 2020 -- Win 10 64bit -- Reaper/Audacity
Zoom R-16 -- Tascam DP-03-SD -- SoundTap -- Crescendo --
Songwriting
Joined: Dec 2003
Posts: 20,645
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 20,645
Ed, I did not explain myself very well; I'm really good at that. Drums are one of the instruments I add after BobH and I have a recorded track; much like what you described.


Me, it's not about how many times you fail, it's about how many times you get back up.
Cop, that's not how field sobriety tests work.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Songwriting
Joined: Apr 2009
Posts: 9,301
Veteran
Offline
Veteran
Joined: Apr 2009
Posts: 9,301
I never use a click track. It's simply a waste of time. I start with the drum track in the song.....since I am using BB, why not?

When I import into Sonar, Part of my normal set up is to mute the metronome immediately. I simply set the tempo and move forward. I have a few EQ presets that I pop into the drum track to make it pop out a bit.... but aside from that...


You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.
Songwriting
Joined: Oct 2016
Posts: 1,558
Expert
Offline
Expert
Joined: Oct 2016
Posts: 1,558
I'm with it now, Mario; if I can ever be said to be truly with it with anything.

Last edited by edshaw; 06/14/21 04:55 AM.

Link: www.soundcloud.com/ed_shaw (Feel Free to Use)
https://drooble.com/edward.shaw/hymn/index.htm
Biab for WIN 2020 -- Win 10 64bit -- Reaper/Audacity
Zoom R-16 -- Tascam DP-03-SD -- SoundTap -- Crescendo --
Songwriting
Joined: Apr 2017
Posts: 1,192
Expert
Offline
Expert
Joined: Apr 2017
Posts: 1,192
Originally Posted By: Guitarhacker
I never use a click track. It's simply a waste of time. I start with the drum track in the song.....since I am using BB, why not?

Whatever…

All my online projects have a click unless they're choral pieces—those are done to a conductor over Zoom since the tempo is fluid.

I like to compose the drum track next to last. Last is for bass.


BIAB 2023 Audiophile, 24/60 Core M2 Mac Studio Ultra/8TB/192GB Sonoma, M1 MBAir, 2012 MBP
Digital Performer 11, LogicPro
Finale27.4, Dorico5, Encore5, SmartScorePro64, Notion6, Overture5
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!

If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.

A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."

"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."

"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."

Happy Easter! Holiday Hours...

2024 is well underway - it's already Easter Weekend!

Our Customer Service hours this weekend are:

Friday, March 29: 8-4
Saturday, March 30: 8-4
Sunday, March 31: closed

Regular hours resume Monday, April 1st - no joke!

Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Forum Statistics
Forums66
Topics81,398
Posts732,549
Members38,442
Most Online2,537
Jan 19th, 2020
Newest Members
danielsk, Mark Morgan, zagrajbarke, Ernest J, Izzy
38,442 Registered Users
Top Posters(30 Days)
MarioD 199
Al-David 133
DC Ron 115
rsdean 85
dcuny 83
Today's Birthdays
(charlie), WobblyGstring
Powered by UBB.threads™ PHP Forum Software 7.7.5