Can the audio generated by band in a box be aligned? Because I find that it is always misaligned. There will be a problem if it is misaligned, that is, I want to intercept, cut and change the position. no way. How to solve it? Is there a forced alignment function?
You may not understand what I mean. What I generate is also perfectly aligned. When I say misalignment, I mean that the generated audio is not aligned with the line of Daw. In this case, I will encounter some problems in cutting, and sometimes I will cut off some beginning. Because I may have to cut and move back and forth, put the front in the back, and put the back in the front. Cut in Daw. I'm not saying BIAB generated misalignment.
Is the concern that notes "on" a beat will sometimes physically start a tiny bit BEFORE the beat?
If so, isn't this just partly the nature of the acoustic envelope, and partly the "humanity" of the music?
yes. hommization. That's what I mean. Because the melody rhythm of band in a box is very humanized. This is a good thing, but it makes cutting more troublesome, because the beginning is often cut off
Because the melody rhythm of band in a box is very humanized. This is a good thing, but it makes cutting more troublesome, because the beginning is often cut off
A major part of what makes Band-In-A-Box what it is, is that the RealTracks and some of the MIDI tracks were played by real human beings, with real touch and expression. If you remove that, you're removing part of what BIAB is trying to do.
Try making your cuts a beat or 1/16th or whatever earlier, cropping or fading-in the sound in your DAW. That's really where the DAW rules, whilst BIAB rules in accurately simulating/replication real musicians. Another possibility is to bring in that instrument several beats early and let it pick up the song before the start of the bar or section. Jazz musicians will often hold the notes of the their final bar of solo, so that the next soloist can have their own melody pick-up during that final bar.
BTW, I fully realise that English is not your first language, so the following is for information or clarification and is definitely not a criticism: "humanized" means that the application is adding some small amounts of variation to note timing or velocity/volume in an attempt to make a previously quantized MIDI track sound a bit more like it was played by a human ... I think that rarely works.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
Because the melody rhythm of band in a box is very humanized. This is a good thing, but it makes cutting more troublesome, because the beginning is often cut off
A major part of what makes Band-In-A-Box what it is, is that the RealTracks and some of the MIDI tracks were played by real human beings, with real touch and expression. If you remove that, you're removing part of what BIAB is trying to do.
Try making your cuts a beat or 1/16th or whatever earlier, cropping or fading-in the sound in your DAW. That's really where the DAW rules, whilst BIAB rules in accurately simulating/replication real musicians. Another possibility is to bring in that instrument several beats early and let it pick up the song before the start of the bar or section. Jazz musicians will often hold the notes of the their final bar of solo, so that the next soloist can have their own melody pick-up during that final bar.
BTW, I fully realise that English is not your first language, so the following is for information or clarification and is definitely not a criticism: "humanized" means that the application is adding some small amounts of variation to note timing or velocity/volume in an attempt to make a previously quantized MIDI track sound a bit more like it was played by a human ... I think that rarely works.
well. Cutting in advance is the only way at present. I've tried, very effective!
I see several possibilities being hinted at here, so let me try to restate them to make sure they are clear:
Always allow some silence at the beginning of a song, so tracks can be aligned. Your first post shows a diagram that you are doing this correctly, but following text (cutting in advance, beginning is cut off) makes me wonder when you start talking about editing. It is perfectly normal working in a DAW to nudge individual tracks left or right. Some even have a keystroke that will do this. Some also have the function to snap all tracks to a point, although most of the time this is overkill.
The players, as mentioned by Gordon and Mark, may often start early and this does NOT mean the music is misaligned. In BIAB, the guitar very often strums early in a piece that has syncopation. And of course there is the drum lead-in, if you have it set for that. This was answered for you in another thread. You have to do each track alignment by ear if you want to make a change.
In general, I suggest in this and many other threads that you become more familiar with the tools and BIAB in particular by asking questions, but in those questions try to resist implying there is something wrong or a bug. Your statement that BIAB generates misaligned tracks is simply false. It is more likely just be a case of you learning the tools, or learning how to do things. I predict you will get more help if you do not start with a false premise. I do understand some of this stems from English not being your preferred language, and I respect that.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
The players, as mentioned by Gordon and Mark, may often start early and this does NOT mean the music is misaligned. In BIAB, the guitar very often strums early in a piece that has syncopation. And of course there is the drum lead-in, if you have it set for that.
Just to be clear myself, I wasn't thinking of things as drastic as a player hitting a chord a beat early, or playing some kind of a lead-in. I wasn't thinking of syncopation. I'm thinking of the kind of "misalignment" that will ALWAYS occur, even when the intent is to play perfectly in time. Sometimes, this will just be "flawed humanity", but often it's part of what I called the envelope of a sound. If you sing "hi, hi, hi, hi" in humanly perfect rhythm, in sync with an electronic metronome, you will still almost certainly find that the "attack" begins a bit before the beat as you begin exhaling and peaks a bit later as the tone takes on full strength. It's more than style, it's the nature of sound.
I'm a bit confused as to why you think the first shot is evidence of a problem. as many people have said above, a band playing live would not all hit beat 1 exactly on a DAW bar line.
your work flow might be causing problems if you need everything so precisely aligned that you can edit the finished song as precisely as you seem to want to.
if you create the song in the BIAB main program you can create an exact order of intro, verse, refrain, solo or whatever. your song format won't need editing.
it is quite normal to cut and paste bits of a solo - or make up a complete solo from various different RealTrack 'takes' that you like or replace a certain phrase in a part - say the piano - that you don't like as much as a phrase elsewhere. but if you get the song format right in BIAB that's all you would need to do.
and with visible audio wave forms you can do that easily without being confined to precise bar lines or tick positions. the visible audio wave form shows you what bits will fit together nicely. you seem to want surgical mathematical 'by the numbers' editing and music played by real people doesn't work exactly like that.
rather than the plugin have you tried creating your song in the main BIAB program? if you get the format and order right there you can then use the DAW to finalise things not move audio about wholesale.
Bob, I think from other threads that the OP prefers to use the plug-in and understands it does not have all the features of the stand-alone program. That’s a choice.
Mark, good clarification. Even without any kind of lead-in or syncopation, actual musicians don’t line up. Agreed. I actually was citing common examples where BIAB intentionally produces good-sounding performances where the musicians do not enter at the same instant. Both points are valid and are examples disproving the ‘misaligned’ concept.
To all: In fact, it’s a human judgement call precisely where a sound does begin. You can’t quite tell just by looking at a waveform.
So, the answer to the original question “Can the generated audio be aligned” is Yes; this is best done during mixing and is best done by a human.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Took a look, didn't watch anything, not sure I understand what you're saying can be done. How does quantization "fix" the "misalignment problem"? Are we talking about actually sliding notes around to "force align" them? What would this do to the example provided?
If you are cutting/pasting you can quantize it then when you have it how you like you can advance it.
So, we are talking about actually altering the audio of the performances, altering the timings, NOT because it sounds better, but to make it easier to cut and paste?
This strikes me as like having a photographic filter that aligns all the objects in the image to a grid, to make it easier to move them around later.
Unless the quantization is temporary and "non-destructive", functioning only to modify the behavior of selection tools?
Most operations on audio in a DAW are non-destructive, which is one of the great things about using one. It's usually in a stereo audio editor that you alter the actual file (after you made a backup, of course). But I still think quantization, or snapping to a grid, is not the solution requested here. In fact, I think the problem is one of understanding.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
To clarify: in my question, I meant "non-destructive" in the sense that the "quantize" operations wouldn't modify the material being worked with in the editor, but would just "intelligently" adjust the boundaries of a selection or the point where it gets pasted. I didn't mean it in the sense of "no permanent changes to the underlying material". Probably not the best term but not sure how else to put it. "Smart" editing, I guess (though I'm tired of everything being "smart".) "Magnetic", maybe.
The users wants to cut n paste without chopping the beginning of the note off, this will allow that. Reaper has non destructive editing, I haven't used S1 enough to know what it does but I assume it would be the same. It is easy to script it up in Reaper to do what you want but S1 you are a bit more limited. I did it in Reaper to allow the sustain to bleed into the next bar after cut n paste.
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.