I'm back looking again at RB and am still finding some things very odd. I imagine again that I'm missing or misunderstanding something, but I can't yet see what or where, so...
I have the default synth set to VSTSynthFont64, setup IIRC via [MIDI Devices]. I've also there turned off Re-Route MIDI playback to default Dxi/VSTi synth. Tracks seem to play suitable instruments OK. I don't know which synth.
Now on a track in "Tracks" view, I click the down-arrow on the track to which I want to add a VSTi, to expand the VST control tab and click [Edit VTSi/DXi...]. Up pops the DirextX/VST Window. So far, so good.
On this window, the top entry says ">> VSTSynthFont64 (Default) <<", which seems reasonable-ish, though I don't knowingly have any tracks named thus. If I click on that box, I get a drop-down that offers lots of tracks. Scroll to the top and I see my named trackes. Select a named track, some things flicker and the DirextX/VST Windows reverts to as it was. Not what I expected.
Go down that window to the first plugin box showing "<VSTi> VSTSynthFont64", click it and select Kontakt. Some flickers and the window opens now with Kontak. OK. Find and double-click an instrument and after a pause it appears in the window. OK.
It seems that I can enter multiple instruments here into Kontakt but and these instuments now appear on all tracks when I click that [Edit VSTi/DXi..] button. That seems odd. All of the track description boxes still show "MIDI: Microsoft GS Wavetable synth" ... and I suspect that's still what it's still playing. It's certainly not yet playing the Kontakt instruments.
Presumably, somewhere, there's some kind of MIDI routing for this, but at present I can't find it, though I think I've succeded in the past in getting a VSTi to play here.
The PGM video for VSTs shows only effects, not VSTis.
The RealBand Manual shows only CoyoteWT, which offers a drop-down with "channels"(MIDI?), but Kontakt does not.
So how, please, do I connect a track to a VSTi instrument?
It also seems to lose Kontakt after saving and reloading. Again that isn't what I expected.
Any pointers, please? Thanks.
Gordon.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
the plug in windows work differently for synths and fx. firstly if you are using synthfont i would enable it as 'divert to dxi/vst sytnth in the midid river set up.
secondly i would replace the sounds with nicer ones. synthfont can take GM soundfonts and a nice one is 'timbres of heaven'. look up my post in the forum 'synthfont is silent' and you'll see how to load new sounds. mt problem was solved by updating synthfont.
so the plugin windows work differently for synths and fx. if you clik the blue track window it will show the default synth in slot 1 and if you want to use a vst or dxi fx, use slots 2, 3 and 4. but don't forget, in the mixer for misi tracks you have a knob for reverb and chorus which semds midi isntructions to the synth.
to use a different synth for a track, select the track and it tuens red. right click and select 'specific vst/dx syth for midi track. then you'll get a drop down and you can select the synth you want.
then when you click the blue fx tag on the track the new synth will show in slot one. and you can select the instrument you want.
one difference i think is that kontakt is not a GM synth - you can't just select it as a default synth and play GM patches. (at least i think i'm rigfht - i don't use kontakt but i thinks its like pforszando) you'll have to open a separate instance on each track and select the instrument you want.
The RealBand Manual shows only CoyoteWT, which offers a drop-down with "channels"(MIDI?), but Kontakt does not.
...................
Gordon.
Kontakt does have MIDI channels. Click on MIDI ch., port (it is usually port A, Kontakt allows 4 different MIDI ports with 16 channels in each), the select your MIDI channel.
Note that Kontakt is NOT GM and that you have to assign a sound (patch) to each channel. I don't use Kontakt in RB but in my DAW I assign a different Kontakt to each track; this works best for me. I believe you must assign a different Kontakt to each track but I may be wrong about that.
I hope this helps.
Me, it's not about how many times you fail, it's about how many times you get back up. Cop, that's not how field sobriety tests work.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
"All of the track description boxes still show "MIDI: Microsoft GS Wavetable synth" This is normal - but the synth in slot 1 is what is playing
and i think Mario is endorsing my idea that you need a separate insance of kontact for each track. however, you may like the default synth sound on one track. setting a different synth for each track allows you to mix and match sounds from different sources
I can't find "divert to dxi/vst synth" and guess you mean the "Re-Route MIDI playback to default Dxi/VSTi Synth". I've checked that again. I still have something playing, though I'm unsure what at present. I have VSTSynthFont64 set as default and I already have "Timbres of Heaven" as the soundfont. All the tracks still say "Microsoft GS etc.", though.
I think I'd unchecked that "Re-Route MIDI playback to default Dxi/VSTi Synth" because I read that I needed that to allow multiple VSTs, but I remember two checkboxes and at present I have only one there, so maybe I'm not where I previously was. Hm, that all sounds a bit existential :-)
Just FYI, the instruments I'm using aren't NI's own, they're Bolder Sounds Roots Upright Bass and Indiginus's Blue Street Brass. That said, from Mario's, I can see where the MIDI channel is set, so I'll play with that tomorrow (it's 11pm, so not now). I'm not sure where RB sets it MIDI channels, but at least I know where to set this end.
RB doesn't presently seem to allow me to set up multiple and I get all the instruments in the one Kontact.
Hmm ... Blue Street Brass is playing ... I'll have to explore the difference! It seems to be playing the bass track .... Ahhh! Got it! Yes!
Thanks guys. That's probably fixed that enough for me to progress.
I just tried a save, close RB, start RB and open and the VSTi stuff has gone again, so there's obviously another hex I need to cast for that. Tomorrow.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
The MIDI channel for the instrument channel is set by right-click on the channel, then Channel->number The MIDI channel on the Kontakt instrument is set as Mario indicates above.
I can "Save Group" and "Load Group" from the DirectX/VST Window, which speeds things up, but as above, it isn't saved in the .SEQ file even though RB thinks the song has changed.
So at the moment, I'm rather back where I started.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
I don't have Kontakt, but you have 16 software synth ports available. That is what assigns different synths to different tracks.
Ah, this refers to right_click track ->Port XX I think. I seem to have many more than 16, but that may be a change. That's where I also see ">> VSTSynthFont64 <<" shown, on Port 17 is appears.
Doing that also changes the description box to inclure "MIDI: >> VSTSynthFont64 <<" or "MIDI: << Kontakt <<", which makes sense.
Originally Posted By: rharv
Each of the 16 Ports can use any of the 16 MIDI channels.. not sure on how to save the Kontakt settings in the SEQ file
I've set up as above and have RB Track 10 set with MIDI channel 1 going to Kontact->Roots Upright Bass listening on MIDI channel 2, and RB Track 5 set with MIDI channel 2 going to Kontakt->Blue Street Brass listening on MIDI channel 2 and all of that runs as expected.
I've set all other RB MIDI tracks to Port 17 as above and left their MIDI channels as is. All other instruments now also play as expected.
Almost there ... I think I now have just that save with plubing se-up issue to resolve.
Edit: "Track" in DirectX/VST Window" seems to offer tracks and MIDI ports. Selecting one of the latter allows me to put VSTi synth on the 1...16 synth ports. I wonder if there's some rationale to the name change between Ports on the right-click and Tracks here.
Edit 2: I saved the DiredctX/VST Synth group, saved the project, closed RB, opened iRB and loaded teh SEQ file. Now the VSTs and settings are saved. Resolved
Last edited by Gordon Scott; 01/03/2209:07 AM.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
Glad that helped Sometimes RB does magic stuff, but it's hard to find .. having cut my teeth on PT, RB comes a little more naturally to me than some
/I seem to be batting 3 for 3 this weekend; I had two other friends call me with similar Port issues in the last couple days, and now all 3 appear happy maybe I should get a lottery ticket so I don't have to go in to the day job tomorrow
//I have many more Ports than 16 also, but I was referencing 'software' Ports, not hardware. If I include all ports it more than doubles, depending on how many devices I have attached, but I think only about 16 are available for various software synths (plus the default synth, which makes 17 I guess)
Last edited by rharv; 01/03/2209:31 AM. Reason: wanted to
Make your sound your own! .. I do not work here, but the benefits are still awesome
//I have many more Ports than 16 also, but I was referencing 'software' Ports, not hardware.
Aye. It can tricky for we newbies to PGM stuff to pick up these things. 30 years of backwards-compatible adapting tends to have that effect :-)
Thanks again all.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
Kontakt is great in that you can use one instance, and load multiple instruments, changing their midi channel to match your tracks, ie you have bass on channel 1, the bass instrument in Kontakt needs to also be on channel 1 and so on. If you computer has the power, it is also ok to load Kontakt on every track if that is what you want to do.
The routing is always the key to any of this.
I tend to use RB to audition and get the idea, then I go into my DAW for the serious bits. It just seems to me that RB, while very powerful, is harder to use, but it could just be ignorance on my part Too!!
My wife asked if I had seen the dog bowl. I told her I didn't even know he could.
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!
We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!
Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.
You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.
This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!
When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.