Matt: I loaded the style and demo song and made sure it had a solo track. I then generated the song, listened for about 5 min and then turned the volume down but not all the way so I had some background music playing. I checked the progress every so often and when it got up to chorus 37 I watched it play to the end. I did not have the looping feature on so when the song reached the end of chorus 40, it stopped as expected. Nothing unusual about the playing except the abnormally long duration due to the # of choruses chosen.
The Vary Style In Middle Choruses was on so I would assume it did that also.
This might help to explain why generating a song of that length might take a while or even may not be possible: if you were to unfold a song that has 40 choruses with each chorus containing 255 measures, that'd be approximately 10,200 total bars you'd be asking Band-in-a-Box to play and generate and then render if exporting to an audio file. For best performance, the max number of measures you can have would be 255. You may start to experience issues after that with playback or generation, and potentially in other ways too.
That said, I tried to set it to 255 at 40 choruses just to test it, and it did change to 7 immediately after I tried picking 40. As Band-in-a-Box's max is 255, I'm not surprised that a song created at all these maxes may not work as it's basically being asked to generate over 10k bars. I will ask the developers about expected behaviours when pushing the program, but I don't suspect this is a bug so much as a program limitation, but I'll share what I find out!
So 255 bars is the max of what you can set in the program, but the maximum linear amount of bars you can have including repeats and choruses is 2000. To that end, what you can set Band-in-a-Box to depends on the math. The program cannot do 40 choruses of 255 because it far exceeds that 2000 limit. You could, however, do 40 choruses of 50 bars because this would equal 2000. The program when you enter 255 bars is putting in that limit of 7 because 7 choruses of 255 = 1785 bars. Setting it to 8 choruses of 255 would push it over 2000 by about 40 measures.
This is serious news. I hope you will announce this in several ways, such as a new FAQ, and a Tip and Trick post, changes in the documentation, etc. I am quite sure most (or maybe even none) of us who have used the program for 30 years knew this way of considering the measure limit.
But before you publish the new limit, may I suggest some more experiments might be in order. In particular, test with a RealTrack set to double-time time base.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
This is serious news. I hope you will announce this in several ways, such as a new FAQ, and a Tip and Trick post, changes in the documentation, etc. I am quite sure most (or maybe even none) of us who have used the program for 30 years knew this way of considering the measure limit.
But before you publish the new limit, may I suggest some more experiments might be in order. In particular, test with a RealTrack set to double-time time base.
Excellent points. I was certainly not aware of these specifications, and as we have found in the past, tracks set to double-time base are presumably limited to half this amount again.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Well I just tried style _CORDIAL.STY which I use in the song, After Your Gone. Originally I had 3 RT's and 1 RD in that song using that style and it had 80 measures. That would equate to 720 bars the BIAB has to generate. Works just fine in that setting.
Using the formula, 2000/80 = 25, I could have a maximum of 25 choruses. Well it only let me do 24 but that was good enough for test purposes.
I then made all the tracks 1/2 time and generated the song again. The result was the song generated with 80 measures with 24 choruses and played at 1/2 time. That was what it should have done.
I then did the same the same thing but set the tracks at Double Time and the result blew me away. Instead of generating the song at Double Time, each time I pressed the Generate & Play button, it opens up my File Browser program in my Song Directory and it wants me to load a style!!!!!
Tried it 2-3 times with different songs that I made and the results are the same. It opens up the File Browser asking me to pick a style.
So......
I then used the same style, _CORDIAL.STY but this time loaded the built in demo song and increased the measures to 64, since mathematically I would not have enough choruses to max it out as the demo song only had 32. Anyways, setting the measures to 64 and the choruses to 31, the song generated and appeared to play just fine at normal time BUT each time, I loose the audio, no sound at all but the song moves along as it appears to play.
Since we are in uncharted territory, I am giving it back to the developers since there appears to be multiple bugs in the program when you approach the max number of measures vs choruses in it's current form.
Bugs I see so far:
1. You cannot go above 2000 measures if the choice of measures and choruses goes above that number.
2. Using a song that YOU made mght cause your file browser program to open if you set the tracks to 1/2 time using the maximum number of measure and chorus combinations.
3. Using a style with the built in demo song might cause you to loose audio when you set the tracks to 1/2 time using the maximum number of measure and chorus combinations.
This is serious news. I hope you will announce this in several ways, such as a new FAQ, and a Tip and Trick post, changes in the documentation, etc. I am quite sure most (or maybe even none) of us who have used the program for 30 years knew this way of considering the measure limit.
But before you publish the new limit, may I suggest some more experiments might be in order. In particular, test with a RealTrack set to double-time time base.
I can definitely pass this along to the right people for that and see what we can set in motion.
This is good to know and thank you for testing that! I will pass this along as well and make a report for it. Although I will mention that the choruses and bars bit needs to = 2000 total. So if it goes over, it will round down to the nearest possible option. You can see this example with the 7 x 255. While 8 x 255 would have only been over by 40, this wasn't possible because it still exceeded the 2000 limit. So it went down to 7 x 255 because ~1780 was possible while 2040 was not.
Limited to 256 measures TOTAL... I am finding songs to be limited to 256 TOTAL MEASURES no matter what I do, when using 1 big chorus or unfolding 3 choruses, etc.
[BIAB 2023 latest build]. When I attempt to add more measures, it defaults to 256. When I unfold songs, they are cut off at 256 measures. -------------------------------------------------------- Am I understanding the above post incorrectly, or is above stated "2000 measure" limit no longer correct?
Please advise.
Thanks, -Tom
P.S. When I attempt to get what I need using the 'Song Form Maker' the program simply crashes. [I am attempting to create a 3 verse & 3 chorus song (traditionally speaking), but with 4 or 8 bars difference in the 2nd & 3rd verses. I can use BIAB multi-chorus feature, but how to nix the 4 or 8 bars in the 2nd & 3rd verses [i.e. BIAB 2nd & 3rd "Chorus"] using BIAB alone?]
Last edited by tomcadman; 08/20/2302:25 PM.
"Most of us go to our grave with our music still inside of us." - Pcom Pete
Limited to 256 measures TOTAL... I am finding songs to be limited to 256 TOTAL MEASURES no matter what I do, when using 1 big chorus or unfolding 3 choruses, etc.
[BIAB 2023 latest build]. When I attempt to add more measures, it defaults to 256. When I unfold songs, they are cut off at 256 measures. -------------------------------------------------------- Am I understanding the above post incorrectly, or is above stated "2000 measure" limit no longer correct?
Please advise.
Thanks, -Tom
I don't remember this tread from last year, and I don't know what this stuff about 2000 is. 256 is the limit, always has been.
OK, I re-read the entire thread. My conclusion is that this issue was never resolved. So we still don't know what exactly is going on here.
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.