Previous Thread
Index
Next Thread
Print Thread
Go To
Post your own Tips and Tricks here
Joined: Feb 2015
Posts: 7,954
P
Veteran
OP Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
Using ReaStream https://www.reaper.fm/reaplugs/

Load Reastream vst into Biab on the first track set the identifier 1 (each track different 1,2,3,4 etc..) and set it to Send > *local broadcast
set the identifier the same for the corresponding REAPER track and set it to Receive, put a gain control or 2 after the ReaStream vst in BB so BB makes no sound only REAPER https://www.bluecataudio.com/Products/Product_GainSuite/ or LoudMax it's lighter than Bluecat but you may need 2 to cut the volume off, then chain up the FX in REAPER.
Turn any reverb or tone in the BB mixer off.
You can set REAPER to loop play if you have no sound.
If you need to run multiple ASIO https://www.vb-audio.com/Voicemeeter/banana.htm
EDIT: In Reaper Preference > Audio you can set it Always On by unchecking, see pic below.

Check the video out:
Watch
https://www.dropbox.com/s/ck417kozmsar2a0/BB-Reaper-ReaStream.mp4?dl=0

Download
https://www.dropbox.com/s/ck417kozmsar2a0/BB-Reaper-ReaStream.mp4?dl=1

I haven't worked out midi with ReaStream I think that is just Biab doesn't have midi plugin chain, so to send midi for Mac you can use midiOut.dll
Click the Softpedia Secure Download (US) link not the external, for Win https://www.dropbox.com/s/ifc0waq0qdusb3z/midiOut.zip?dl=1 and use LoopMidi and set it to LoopMidi Out then set Reaper track to LoopMidi In, for Mac just create a virtual midi cable.


The first time you set this up would be time consuming.
But once you save it all next time will be quick.

On each BB track in the VST window Save each track FX with Save Group.
In REAPER just save it as a default BB FX project.
You can setup
Track 1 ReaStream 1 with a different set of FX
Track 2 ReaStream 1 with a different set of FX
Track 3 ReaStream 1 with a different set of FX

Track 4 ReaStream 2 with a different set of FX
Track 5 ReaStream 2 with a different set of FX
Track 6 ReaStream 2 with a different set of FX
....
....
and the same for the other ReaStreams
then you just solo the track that you want to use for each track send from Biab.

So you have REAPER running each time you start Biab,
after you have the Biab song generated open the VST window
and Load Group for each track:
Track 1 Reastrem 1.tgs
Track 2 Reastrem 2.tgs
Track 3 Reastrem 3.tgs
Track 4 Reastrem 4.tgs
Track 5 Reastrem 5.tgs

Once it's all sounding good and you have the tracks how you want them just drag export each track into the corresponding REAPER track and Render.






Attached Files (Click to download or enlarge) (Only available when you are logged in)
Reaper_Always_On.png (14.11 KB, 218 downloads)
Last edited by Pipeline; 11/16/18 08:29 PM.
Post your own Tips and Tricks here
Joined: Feb 2015
Posts: 7,954
P
Veteran
OP Offline
Veteran
P
Joined: Feb 2015
Posts: 7,954
As there is no ReaStream for Mac AUNetSend and AUNetReceive that comes with Mac will do the same job.
Also: VST3 version of system-supplied Mac OS X AUNetSend audio plugin https://github.com/vgorloff/VST3NetSend
though using it with Biab you would have to load/drag it in KV Element

Post your own Tips and Tricks here
Joined: Dec 2021
Posts: 120
D
DFT Offline
Apprentice
Offline
Apprentice
D
Joined: Dec 2021
Posts: 120
Hi Pipeline ...

Resurrecting an old thread for a related question.

Instead of streaming externally, could you use KV Elements (or Patchworks) to host a multi-timbral, multi-audio output VSTi and Reastream to take individual tracks back to the BIAB mixer master channel?

The purpose would be to individually process those VSTi individual outputs while arranging in BIAB ... assuming that it would also be possible to instantiate plugins between the KV Elements audio outputs and the BIAB mixer using KV ElementsFX or some similar solution.

Thank you.


Help! I've fallen up and can't get down!
Post your own Tips and Tricks here
Joined: Jun 2009
Posts: 2,421
Veteran
Offline
Veteran
Joined: Jun 2009
Posts: 2,421
You just need to try it and see if it handles all your plugins.
https://www.dropbox.com/s/r9jbqkmbs28v409/Biab-Halion.mp4?dl=0
all tracks re-route to the Utility #1 with Element and Halion.vst3

the Drums are sending to stereo 2 through FX
the guitar is sending to stereo 3 through FX
all other tracks are sending to stereo main
all goes to Biab Master.

There is also
Advanced Mixer for Biab Win/Mac

Post your own Tips and Tricks here
Joined: Dec 2021
Posts: 120
D
DFT Offline
Apprentice
Offline
Apprentice
D
Joined: Dec 2021
Posts: 120
Muso!

This is great. The only thing I didn't understand is routing via Utility #1.

I see Elements is instantiated on Utility #1, but I don't understand how on the MIDI tracks the plugin window show <(Utility #1):Kushview> already present before you reroute.

How do you do that step?

Also, FWIW, could the same thing be done with Patchwork?

I've downloaded Elements, but I haven't had time to install and give it a run.

I must say I really, really appreciate you going far. far above and beyond in helping me. I don't know what all you do, but you should get yourself a Youtube channel and become the David Bennett of Computer Audio Routing.


Help! I've fallen up and can't get down!
Post your own Tips and Tricks here
Joined: Jun 2009
Posts: 2,421
Veteran
Offline
Veteran
Joined: Jun 2009
Posts: 2,421
You just need to Re-Route the midi style tracks manually from the Default Synth to Element.
You maybe able to create an AutoHotkey script to set all midi tracks to the Element track.
The Util track was "Save group" to C:\bb\DX Settings\A Halion Element.tgs

You should be able to do it with BlueCat but I didn't try it, users wanted something cheaper than BlueCat so I found Element and it's easier to see what you are doing.

Zoom++

Post your own Tips and Tricks here
Joined: Dec 2021
Posts: 120
D
DFT Offline
Apprentice
Offline
Apprentice
D
Joined: Dec 2021
Posts: 120
Originally Posted By: musocity
You just need to Re-Route the midi style tracks manually from the Default Synth to Element.


Thanks again.

I got confused because I am pretty sure you had already done the rerouting when you showed in the screen capture how to reroute?

That must have been why that rerouting already displayed in the MIDI tracks 1st Plugin slot as you were demonstrating how to reroute those tracks.

Correct? Or am I still missing something?


Help! I've fallen up and can't get down!
Post your own Tips and Tricks here
Joined: Jun 2009
Posts: 2,421
Veteran
Offline
Veteran
Joined: Jun 2009
Posts: 2,421
Yes it was already done.
So if I open a new midi style I go to the Utility track FX and Load group (this is the Saved group with Element and Halion with the FX on it's audio outs).
Then I Re-Route each midi track to the Utility Element.

Post your own Tips and Tricks here
Joined: Dec 2021
Posts: 120
D
DFT Offline
Apprentice
Offline
Apprentice
D
Joined: Dec 2021
Posts: 120
10 4!

Glad I could figure something out.


Help! I've fallen up and can't get down!
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Video: Volume Automation in Band-in-a-Box® 2024 for Windows®

We've created a video to help you learn more about the Volume Automation options in Band-in-a-Box® 2024 for Windows.

Band-in-a-Box® 2024: Volume Automation

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#volume-automation

Video: Audio Input Monitoring with Band-in-a-Box® 2024 for Windows®

We've created this short video to explain Audio Input Monitoring within Band-in-a-Box® 2024, and included some tips & troubleshooting details too!

Band-in-a-Box® 2024: Audio Input Monitoring

3:17: Tips
5:10: Troubleshooting

www.pgmusic.com/manuals/bbw2024full/chapter11.htm#audio-input-monitoring

Video: Enhanced Melodists in Band-in-a-Box® 2024 for Windows®!

We've enhanced the Melodists feature included in Band-in-a-Box® 2024 for Windows!

Access the Melodist feature by pressing F7 in the program to open the new MultiPicker Library and locate the [Melodist] tab.

You can now generate a melody on any track in the program - very handy! Plus, you select how much of the melody you want generated - specify a range, or apply it to the whole track.

See the Melodist in action with our video, Band-in-a-Box® 2024: The Melodist Window.

Learn even more about the enhancements to the Melodist feature in Band-in-a-Box® 2024 for Windows at www.pgmusic.com/manuals/bbw2024upgrade/chapter3.htm#enhanced-melodist

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Specifically for Reaper®

New with the DAW Plugin Version 6.0, released with Band-in-a-Box® 2024 for Windows: the Reaper® Panel!

This new panel offers built-in specific support for the Reaper® DAW API allowing direct transfer of Band-in-a-Box® files to/from Reaper® tracks!

When you run the Plugin from Reaper®, there is a panel to set the following options:
-BB Track(s) to send: This allows you to select the Plugin tracks that will be sent Reaper.
-Destination Reaper Track: This lets you select the destination Reaper track to receive media content from the Plugin.
-At Bar: You can select a bar in Reaper where the Plugin tracks should be placed.
-Start Below Selected Track: This allows you to place the Plugin tracks below the destination Reaper track.
-Overwrite Reaper Track: You can overwrite previous content on the destination Reaper track.
-Move to Project Folder: With this option, you can move the Plugin tracks to the Reaper project folder.
-Send Reaper Instructions Enable this option to send the Reaper Instructions instead of rendering audio tracks, which is faster.
-Render Audio & Instructions: Enable this option to generate audio files and the Reaper instructions.
-Send Tracks After Generating: This allows the Plugin to automatically send tracks to Reaper after generating.
-Send Audio for MIDI Track: Enable this option to send rendered audio for MIDI tracks.
-Send RealCharts with Audio: If this option is enabled, Enable this option to send RealCharts with audio.

Check out this video highlighting the new Reaper®-specific features: Band-in-a-Box® DAW Plugin Version 6: New Features Specifically for Reaper®

Band-in-a-Box® 2024 DAW Plugin Version 6: New Features Video

The new Band-in-a-Box VST DAW Plugin Verion 6 adds over 20 new features!

Watch the new features video to learn more: Video: Band-in-a-Box® 2024 - DAW Plugin Version 6 New Features

We also list these new features at www.pgmusic.com/bbwin.plugin.htm.

Forum Statistics
Forums66
Topics81,393
Posts732,476
Members38,441
Most Online2,537
Jan 19th, 2020
Newest Members
zagrajbarke, Ernest J, Izzy, BenChaz, Csofi
38,440 Registered Users
Top Posters(30 Days)
MarioD 195
Al-David 124
DC Ron 113
dcuny 87
rsdean 83
Today's Birthdays
CeeDee, SethMould
Powered by UBB.threads™ PHP Forum Software 7.7.5