Previous Thread
Index
Next Thread
Print Thread
Go To
Page 1 of 2 1 2
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Hi, all.

I have a challenge that a friend of mine said that's impossible to achieve.
I'd like to lower a voice 3 tones down, but keeping the most similar timbre from the original version.

Is it impossible, the way I was awarned?
If no, how to do it using Melodyne?
Or other tool?

Thanks.

Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,867
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,867
My practical limit for pitch correction is three HALF steps. By tones, did you mean half steps or full steps? I assume half.

Melodyne Editor has the largest pitch range of any program I've used. I don't foresee a problem. You just locate the note on the grid and drag it up or down to change pitch (and left or right to change timing). Pretty easy, really, and very powerful.

Does your question have anything to do with Band-in-a-Box specifically? The new Playable RealTracks make pitch changes possible, but I haven't pushed the limits of how far you can go without hearing artifacts.

Welcome to the Forum.


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Hi, Matt.

Thank you very much for your quick reply.

Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
I'm newbie and I'm afraid to doing wrong actions.
I put a emoji into my reply and it goes just a part of it.
And I couldn't edit it...
Your system here is very severe...
I had to wait for 300 seconds... ...to post again.


This is the full reply:


Hi, Matt.

Thank you very much for your quick reply.

well, I mean full step.
But, yes, I have to explain more.

In fact, my goal is to change the whole song to a key 6 half tones lower.
Not just one or two notes.
I.e, from A to Eb.

But when I do that, the voice changes too much and gets another timbre and it seems to belong to another singer, not the same one.

Challenge is to adjust that modified timbre to return to the original one. Or, at least, to a very similar one.

I'm talking about the whole song, not only parts of it.

Recording, Mixing, Performance and Production
Joined: Dec 2003
Posts: 20,814
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 20,814
In Melodyne you use the format tool to change the timbre of notes. You might be able to get something close to the original timbre, however 6 half tones is a lot jump so you may run into other artifacts.

But the real question is how good is your friends hearing? The reason I ask is because even though you can move notes around they will not sound exactly like the original note. Each note has a specific set of harmonics/formats. When you move a note those harmonics/formats move the same amount as the original note while the destination note will have a different set of harmonics/formats.

BUT only a few people will be able to tell the difference. I worked with a guy whos daughter sang a wrong note so I moved it to the right note one step higher. He could tell that wasn't sounding right; he had no idea what I was doing while using Medodyne. Personally I can not tell the difference.


Me, it's not about how many times you fail, it's about how many times you get back up.
Cop, that's not how field sobriety tests work.

64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
#Thank you, very much, MarioD, for your reply.

Sorry if I make dumb questions, but I'm very new to Melodyne.

Yes, I was aware that formant tool would be the right one to work on timbres.
I'll show as example of song that I'm trying to "transpose" key, preserving timbre.

First, I have the original panel:




So, I changed pitch from A to D#:





And moved formant back to A:






It show up too many artifacts, as you can see.
Is it normal?
Did I do the right procedures to achieve what I'm trying to do?

Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Thank you, MarioD, but my reply is awaiting the Moderation approval.

Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Now, waiting for some comment about my previous post, if I did the right thing to lower the key (keeping the timbre) and if there is a better way to do that.

Anyone?

Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,867
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,867
That's a tritone worth of pitch change. I don't know any wind instrument that can retain the same timbre after that much change. This is one of the reasons why I have trumpets pitched in Bb, C, D, Eb, F, G and A. Also why there are soprano, alto, tenor, baritone and bass saxes, each tuned a fourth or fifth from the next one.

For voice, I don't claim to know.

What moderation approval?


BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Originally Posted By: Matt Finley
That's a tritone worth of pitch change. I don't know any wind instrument that can retain the same timbre after that much change. This is one of the reasons why I have trumpets pitched in Bb, C, D, Eb, F, G and A. Also why there are soprano, alto, tenor, baritone and bass saxes, each tuned a fourth or fifth from the next one.

I see...
But, if I try to change less tones, let's say 3 or 4, instead of 6?

And the point here is more about the use of Melodyne.
Did I do the right steps? To do the task?


Originally Posted By: Matt Finley

What moderation approval?

I don't know either.
After click "Submit" button, I got a message saying that I had to wait the Moderation approval.
Some minutes later, my post was released.

And also:
Until some minutes ago, I wasn't allowed to edit none of my previous posts.
If I'd tried, I'd got a message saying that my account had to be analyzed first.
I think it's because I'm new here.
smile

Last edited by Gabarito; 12/22/22 01:44 PM.
Recording, Mixing, Performance and Production
Joined: Jul 2000
Posts: 25,867
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 25,867
It's been over twenty-seven years since I was new here (and there was other forum software prior to 2000), so I don't know. Perhaps like some forums there is a five-post minimum to gain some privileges, as a tool to combat first-time spam posts? Anyone else know about this?

In Melodyne Editor, I just drag a note, or a highlighted group of notes, or a pitch in the left column that highlights all notes of that pitch, up or down to change pitch. Is there another way?



BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Thanks, Matt.

Let's wait a little more.
Maybe someone else knows more than us both.

Recording, Mixing, Performance and Production
Joined: Apr 2016
Posts: 6,253
Veteran
Offline
Veteran
Joined: Apr 2016
Posts: 6,253
If you are using Reaper you could use JSFX Spectrum Matcher.
It would analyses your current recorded vocal's timbre and then apply EQ etc. to correct the your pitch shifted one.
It'd take some experimenting and tweaking but should restore at least some of the tone you're after.
You can find the VST/Plugin in the Reaper stash and there're a couple of videos on Utub to assist.


Cheers
rayc
"What's so funny about peace, love & understanding?" - N.Lowe
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Thank you, rayc.

I downloaded Reaper and had installed JSFX Spectrum Matcher plugin, as you had guided. I never used that program/plugin before.
For a big newbie as I am, it's a little complicated to analyze this sort of stuff, at first view.
But I will try to understand its main concepts.

If you, please, could explain more details or show a little example, it'd be great.

Thanks.

Recording, Mixing, Performance and Production
Joined: Apr 2017
Posts: 1,192
Expert
Offline
Expert
Joined: Apr 2017
Posts: 1,192
I often use ZTX for what you're trying to do. It is bundled in a large number of applications including TwistedWave, Digital Performer and ProTools. Unfortunately, you cannot just buy it standalone from Zynaptiq except as Pitchmap and that's pretty expensive.
Zynaptiq

Changing instrument tracks in Melodyne more than a 3rd is a lot of work — no way do I try that with vocal tracks. Just sounds weird.

For voice only, the AVOX plugins from Antares (Autotune) might be the best. They're available individually or as a suite. 30 day trial.
AVOX 4


BIAB 2023 Audiophile, 24/60 Core M2 Mac Studio Ultra/8TB/192GB Sonoma, M1 MBAir, 2012 MBP
Digital Performer 11, LogicPro
Finale27.4, Dorico5, Encore5, SmartScorePro64, Notion6, Overture5
Recording, Mixing, Performance and Production
Joined: Apr 2016
Posts: 6,253
Veteran
Offline
Veteran
Joined: Apr 2016
Posts: 6,253


Cheers
rayc
"What's so funny about peace, love & understanding?" - N.Lowe
Recording, Mixing, Performance and Production
Joined: Apr 2016
Posts: 6,253
Veteran
Offline
Veteran
Joined: Apr 2016
Posts: 6,253
I did some more experimenting today and downloaded a bundle of isolated vocals from the internet then set each useful one, (there were quite a bit that had reverb or were done with cheap iso software so were nasty sounding), as a preset. I made sure to use sections from verse and save as verse, then chorus and so forth when there were differences in the vocal tone and other sections of song too.
Here are a couple I did today of the same song.
One has Major tom's help & the other the fellow who lost his faith.
Those were for the lead vocals - each had a verse and chorus profile
The backing vocal profiles are of a few friends of mine.
I'll be spending time to find which profile suits my voice best...that's the point.
Oh, I also, for experiment's sake, made & used a bass profile in the Lost one.
Happy songs profile assisted.


Cheers
rayc
"What's so funny about peace, love & understanding?" - N.Lowe
Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Originally Posted By: Mike Halloran
I often use ZTX for what you're trying to do. It is bundled in a large number of applications including TwistedWave, Digital Performer and ProTools. Unfortunately, you cannot just buy it standalone from Zynaptiq except as Pitchmap and that's pretty expensive.
Zynaptiq

I'll try to find a way to taste that ZTX tool.


Originally Posted By: Mike Halloran

Changing instrument tracks in Melodyne more than a 3rd is a lot of work — no way do I try that with vocal tracks. Just sounds weird.

I'm realizing that.


Originally Posted By: Mike Halloran

For voice only, the AVOX plugins from Antares (Autotune) might be the best. They're available individually or as a suite. 30 day trial.
AVOX 4

Thanks, Mike, for all suggestions.

Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Originally Posted By: rayc
I did some more experimenting today and downloaded a bundle of isolated vocals from the internet then set each useful one,

I loaded both versions into Melodyne and could see little differences between them.
As I could see, they sounds at the same tone.

Recording, Mixing, Performance and Production
Joined: Dec 2022
Posts: 15
Enthusiast
OP Offline
Enthusiast
Joined: Dec 2022
Posts: 15
Playing a little with programs I've never used before, I found a very obvious panel that I think gave me some results similar what I was looking for.

I mean this very evident panel:



Applying 4 pitches down and around -1500 formants, it's enough to get something near of I was expecting.

I found out that it saves me from dragging waveform up and down.

So, I think I'm satisfied with the result I got, for while.
I have to learn a lot more about this programs. Reaper too.
If is it the case, I'll come back for more questions.

Thank you all, gentlemen.

Last edited by Gabarito; 12/24/22 04:48 AM.
Previous Thread
Next Thread
Go To
Page 1 of 2 1 2

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Update Your PowerTracks Pro Audio 2024 Today!

Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!

Learn more about this free update for PowerTracks Pro Audio & download it at www.pgmusic.com/support_windows_pt.htm#2024_5

The Newest RealBand 2024 Update is Here!

The newest RealBand 2024 Build 5 update is now available!

Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.

This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245

The Band-in-a-Box® Flash Drive Backup Option

Today (April 5) is National Flash Drive Day!

Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!

For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.

Backup copies are offered during the checkout process on our website.

Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!

Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.

Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.

Update your Band-in-a-Box® 2024 for Windows® Today!

Update your Band-in-a-Box® 2024 for Windows for free with build 1111!

With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!

Learn more about this free update for Band-in-a-Box® 2024 for Windows at www.pgmusic.com/support_windowsupdates.htm#1111

Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!

If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.

A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."

"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."

"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."

Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!

The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!

There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.

If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.

We hope you find some inspiration from this amazing collection of User Showcase Songs!

Congratulations to the 2023 User Showcase Award Winners!

We've just announced the 2023 User Showcase Award Winners!

There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.

Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.

Thank you to everyone who has contributed!

Forum Statistics
Forums66
Topics81,620
Posts735,182
Members38,517
Most Online2,537
Jan 19th, 2020
Newest Members
maxrob61, TonyInManchester, jslynbrrs01, amdwilsns01, Juan Jose
38,516 Registered Users
Top Posters(30 Days)
MarioD 185
DC Ron 99
dcuny 87
DrDan 74
Today's Birthdays
Bernard Rasson, John Temmerman
Powered by UBB.threads™ PHP Forum Software 7.7.5