I have a question about microphone latency. I'm trying to record specifically with band in a box. I just got a new headphone with a microphone on it and I'm trying to use it but it seems that when I try to record my voice on my song the audio of my vocal is falling behind the music what can I do to fix this? Thank you for any help. I have band in a box 2020 and I have never tried to record with the USB in band in a box, but like I said my voice keeps falling behind the music and I'm wondering what's wrong and how can I fix this?
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
Generally this is fixed by using an appropriate auidio driver. You need to install an ASIO driver. Not MME or WAS you need ASIO... to reduce latency to an acceptable level.
most people/project studios use a low latency usb interface with asio/wdm drivers.and plug a xlr mic into the interface. a lot of interfaces now have v low latency.some of the order of a few millisecs which one doesnt notice.
i'm not at my pc right now...but if i remember there is a adjust in the drivers section of prefs for latency. (i would also talk to support n' see if they have any triks/solutions....cos ive never used your approach/gear)
it might be a good idea to post back more info on manufacturer of your mic etc as well as pics of your bb driver settings...which helps in diagnosis.
finally have you ever run latency mon on your pc ?
If your audio card/module has direct monitoring, then you're probably better using that as it will have essentially zero latency. If not you'll have to use one of the above methods to get low latency.
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 10; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
Trapper456, My USB gaming headset with integrated headphone and microphones is likely similar to what you are using. You can not minimize your audio latency with your existing setup.
There are three solutions to your issue: (1) Use an external audio interface that includes direct monitoring. (2) Use different software that has a direct monitoring feature. (3) Update Band-in-a-Box to 2023 which has (new this year!) the direct monitoring feature.
Option 1: Most audio interfaces include an internal mixer that combines the outgoing computer audio signal with incoming audio coming from a microphone or instrument and then sends the combined audio signal to a headphone jack. The interface delays your incoming audio signal long enough for the incoming and outgoing audio signals to match. Not all audio interfaces have this feature and they all seem to have their on marketing name for the feature. Loopback, echo, direct input and direct monitoring are names I can think of off hand. The +++ Samson Go Mic +++ is a relatively inexpensive USB microphone with this feature. This from the webpage link:
Quote:
It also includes an 1/8″ (3.5mm) headphone output for zero-latency direct monitoring. This means there will be no delay between the audio you’re recording and the audio you’re hearing.
Option 2: Many DAWs have a button or setting that adjusts track audio output to match a recorded audio input. The DAW I use, Cakewalk by Bandlab, calls this echo and it is discussed in more detail +++ HERE +++.
Option 3: A +++ new feature +++ in 2023 Band-in-a-Box is audio input monitoring.
Quote:
Audio Input monitoring to hear your Audio Input (e.g., electric guitar with effects) through to Audio Out.
Quote:
This is like "Audio Thru" and it routes incoming audio to Audio Out.
To use this feature, you need to arm the track that you are recording to. Right-click on the track button in the Mixer and select the Arm Track for Audio Input Monitoring menu item, or right-click on the VU meters and select Arm Track from the menu.
The VU meters right-click menu has options to select an audio input. For example, if your audio interface has two inputs (right/left) and you want to record from a microphone plugged into the right input, select the Mono Right to Stereo menu item.
When the track is armed, blue borders are drawn around the VU meters. You can now monitor audio input along with the effects that you select on that track. For example, if you want to add a tremolo effect to your recording, right-click on the first slot in the Mixer, select Choose Plugin from the menu, and select a tremolo effect. Now, when you sing or play an instrument though the microphone, you will see it on the VU meters and you will hear it along with the tremolo effect.
I'm assuming this mic with headphones uses a USB connection. When USB mics were first introduced, they were cheap and were promoted for podcast use. It was simply not possible to get anything really good out of them. I don't know if that's still the case, but I don't see a lot of USB mics in the Sweetwater catalog and I assume that's for a reason. The better solutions have been discussed above.
If this headphone / mic unit does not connect via USB, then never mind; please identify the model and brand.
BIAB 2023 Win Audiophile. Software: Studio One 6 Pro, Swam horns, Audition 3, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & A5X monitors
I have a question about microphone latency. I'm trying to record specifically with band in a box. I just got a new headphone with a microphone on it and I'm trying to use it but it seems that when I try to record my voice on my song the audio of my vocal is falling behind the music what can I do to fix this? Thank you for any help. I have band in a box 2020 and I have never tried to record with the USB in band in a box, but like I said my voice keeps falling behind the music and I'm wondering what's wrong and how can I fix this?
Get a proper audio interface with proper ASIO drivers and a proper microphone. Done.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Not suitable for recording.
Once again: Get a proper audio interface with proper ASIO drivers and a proper microphone. Done.
Last edited by Byron Dickens; 03/27/2305:15 PM.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
What is your audio interface, also called a sound card. If you are using your mic directly into your computer you are probably using a REaltek sound card and they are not for recording music/vocals. I believe what you purchased is used for games and talking/work, not for vocal recordings.
Even a single input audio interface like this one for $40 USD:
<< So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020. >>
<<I'm trying to record specifically with band in a box. >>
The USB Mic/headphone combo you have is more than sufficient for the task you are attempting. The microphone has no affect to causing latency. Latency is between the built-in usb interface, the pc and program. The solution to latency can be fixed in BIAB without any additional cost or changes in hardware. Using 2020 version of BIAB doesn't have direct monitoring capability so you're unable to hear yourself playing an instrument or singing vocals during recording. You hear latency when you playback the recording. That's all that needs to be adjusted. BIAB has latency adjustments for MME, WAS, and ASIO drivers. Latency will only need an initial adjustment to synch the mic/headset to BIAB. Once the latency offset amount has been determined and adjusted, recorded audio and BIAB will be synched.
Even if you don't adjust the latency, since it's a fixed amount of milliseconds, it is a simple matter to highlight to select the entire vocal/instrument recorded audio track and cut/paste the track into synch with the BIAB tracks. This is done from the Audio Edit Window. Cut the audio track from the very beginning of the audio to past the ending and this stores the cut audio to the clipboard. Use the red curser line to mark where the beginning of the audio recording needs to be moved to. The audio recording beginning will paste at the red curser which will synch the audio recording with the BIAB tracks.
I have used that 'Latency Adjust' button in Charlie Fogle's picture a couple times when working with very basic setups. That little tool may in and of itself help you adjust your issue.
For better results, an audio interface (as mentioned) is a better approach, but usually you can get around it when needed.
Make your sound your own! .. I do not work here, but the benefits are still awesome
If you are serious about this hobby of recording, you should invest in the proper tools. That includes a good interface such as a focusrite Scarlett or equivalent, that runs ASIO drivers and purchase a decent condenser mic that plugs into the interface.
Neither need to be particularly expensive. There's decent condenser mics that are under $100 and will give you good sounding audio. You can get a used interface for cheap but research it first to make sure it uses ASIO and that it has phantom power for the condenser mic. You can't generally go wrong with focusrite
There are always delays in sampled systems. ASIO will only reduce the delay to a low value, that you may or may not notice.
Synchronising at playback/mixing is sensible, and if you are mixing to a video signal it becomes essential. That's why the clapper board was invented over a century ago, to sync sound and film accurately.
I would recommend ensuring your headphone microphone and audio interface drivers are up-to-date. Also, check Band in Box settings for any latency adjustments or buffer size settings you can tweak to reduce delay.
Band-in-a-Box® 2023 for Mac is macOS Sonoma Compatible!
We're over the moon to announce that the latest Band-in-a-Box® 2023 for Mac Build 707 is compatible with macOS Sonoma!
Refresh your Band-in-a-Box® 2023 for Mac today with this free update to resolve visibility of notation in the Notation Window, apply smoother use of notation features, update to the Drums VU meter, and add the newest version of the DAW Plugin (5.5.13).
Revisit: Eyes on Success featuring PG Music Inc., Band-in-a-Box®, and the Updated JAWS Script
In the past, Eyes on Success featured an episode that discussed our company history and Band-in-a-Box® program with Tobin, our chief development officer, including how Band-in-a-Box® is even more accessible with the help of their JAWS screen reader scripts!
Later on this month, Eyes on Success will be releasing an episode that features Gudrun Brunot talking about her new tutorials about how to use Band-in-a-Box® with JAWS.
It's a great idea to pair the two episodes together!
Eyes on Success is a weekly radio show / podcast geared to the visually impaired called "Eyes On Success" and that can be found at www.EyesOnSuccess.net.
Find out more about the show and get links to past episodes at www.EyesOnSuccess.net
User Tip: How to add drum fills without changing any other tracks
MarioD has shared some great advice when it comes to adding drum fills without changing any other tracks in your song:
There have been a number of questions asking how to add drum fills without changing any other tracks in a song. This is especially important if one is holding a chord for a few measures and wants to add a drum fill prior to the next chord. The following is how to accomplish that:
1-get the instruments/tracks to play like you want but don't worry about the drums for now.
2-generate the song.
3-freeze all tracks
4-unfreeze the drum track
5-add your fills where you want them
6-generated the song again - note this will only generate the drum track and not the frozen tracks
7- when you get the drums like you want them freeze the track
Review - Band-in-a-Box® 2023 for Windows is Overflowing with Features!
Dennis posted his very thorough Band-in-a-Box® review recently, where he dives into some of the new features added with version 2023: Sound-Guy's Band-in-a-Box Review
Read his thoughts on the Download & Install Manager, partial track regeneration, Playable RealTracks, Audio Editing, the addition of SynthMaster, the VST DAW Plugin, and more!
"Band-in-a-Box continues to be an expansive musical tool-set for both novice and experienced musicians to compose, arrange and mix songs, as well as an extensive educational resource. It is, without negative connotation, a monster of a program. Yet, so is any DAW that I have used. No DAW can do some of the things BIAB does, while BIAB can do a lot that DAWs do."
Band-in-a-Box® Tutorials for Low-vision and Blind Program Users
Our friends at EyesFree_Tutorials have just released their Band-in-a-Box Tutorials, Bundle 2!
Created for low-vision and blind program users, this collection of Band-in-a-Box for Windows tutorials includes 31 audio instruction files and 19 music files for practice, plus help documents. Specific topics include "ABACA, let's make a song form," "Recording melody and lead-in," "Playing and editing: part markers; the handy clipboard. The play function. Search and replace," and more!
Learn more about their new tutorials, and connect with Roy & Gudrun to order the Band-in-a-Box Tutorials, Bundle 2 here.
Looking for answers to your questions about Band-in-a-Box? From "How do I ____?" to "What do I ____?" to "What is ____?" and more, you'll find your answers when you ask ChatPG!
We will be constantly updating the resources for this powerful addition to our website based on suggestions & feedback, as well as all of the questions that have been asked by program users and website visitors.
Videos! Get To Know XPro Styles PAK 5 & Xtra Styles PAK 16 for Band-in-a-Box® 2023
XPro Styles PAK 5 adds 75 new RealStyles for rock, pop, jazz, funk, and country, and 25 styles based around MIDI SuperTracks that utilize the SynthMaster plugin!
Here's just a taste of what XPro Styles PAK 5 has in store: electronic Latin funk, spacey dancehall grooves, soulful Americana ballads, heavy house beats, vibin' cool jazz, rollicking country train beats, playful pop country jams, gritty blues rock, modern disco funk, moody synthwave, subdued bossa nova, lo-fi jazz, and many more! Pick up XPro Styles PAK 5 today!
What are XPro Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition) of Band-in-a-Box® 2023 (or higher). Each PAK includes over 100 styles!
XPro Styles PAKs aren't exclusive to Pro users, there's a huge range of RealStyles available for everyone - even Audiophile customers! That's right, XPro Styles PAKs can be used with ANYBand-in-a-Box® 2023 package!
Xtra Styles PAK 16 includes an absolute plethora of styles... 200 to be exact! 50 new styles each for Jazz, Country, Rock & Pop, and Praise & Worship!
Take a gander at what you can expect to find: modern disco funk, exciting gospel shout, busy jazz fusion, soulful R&B ballads, various Americana styles, modern pop country, blistering heavy metal, uplifting worship rock, lo-fi hip hop, a plethora of progressive rock, old-timey autoharp, modern surf rock, and many more!
What are Xtra Styles PAKs?
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2023 (or higher). With over 2,600 styles included in Xtra Styles PAKs 1-16, the possibilities are endless!
Xtra Styles PAK 16 requires the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® version 2023. They won't work with the Pro or MegaPAK version because they need the RealTracks from the 2023 UltraPAK, UltraPAK+, or Audiophile Edition..
How do I know if I have XPro Styles PAKs or Xtra Styles PAKs?
You can find out in Band-in-a-Box® by clicking the "Add-ons" button in the StylePicker. Show me how.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean