|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 21,631
Veteran
|
Veteran
Joined: May 2000
Posts: 21,631 |
Try unchecking that bottom one.
Make your sound your own!
.. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Here is some more additional info about the situation before and after the error. This info is shown below in the ASIO Setup Dialog of RealBand :
[BEFORE ERROR] - Driver Info:
Input channels 10
Output channels 6
Allowed sample rate 44100 <yes>, other rates <no>
Input data format : Int32LSB
Output data format : Int32LSB
Buffer sizes in samples: min=256 max=5376 pref=256 granularity=256
actual ASIO buffer size in MS: 5.80
actual ASIO sample rate used: 44100 (Resampler NOT in use)
[AFTER ERROR]- Driver Info:
Input channels 0
Output channels 0
Allowed sample rate 44100 <no>, other rates <no>
Input data format : Int16MSB
Output data format : Int16MSB
Buffer sizes in samples:
actual ASIO buffer size in MS:
actual ASIO sample rate used:
Obviously also the data format is changed from Int32LSB to Int16MSB. Does anybody know what this relates to and what may have causes this change? Maybe this leads to a new clue?
greetings and thanks in advance,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2002
Posts: 6,974
PG Music Staff
|
|
PG Music Staff
Joined: May 2002
Posts: 6,974 |
Quote:
The error in RealBand 2010.5 build 2 still occurs with the Roland V-Studio 100
Wait, so you get the same error with two completely different interfaces? Does the error mention the same .dll as before? Do you get the error if you don't use your Roland keyboard at all (unplug the MIDI cables)?
Andrew
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hello Andrew,
Now you mention this, I just checked the error text and you are correct, its a little different then before! Now the error text with the Sonar VS-100 is :
"Access Violation at address 1000285C in module Rdaw1099.dll Read of address 0000108 at: 100285C"
while the message with the Roland UA700 was :
"Access Violation at address 100025B9 in module Rdaw1024.dll Read of address 0000108 at: 100025B9"
So the .dll is different and the address range is some different too!
And to your 2nd question, I already got the error today without the keyboard connected.
Hope this gives some new clue.
greetings,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,687
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,687 |
Hi Valentino, Andrew said this a few days ago.
<Run the program from this folder and answer no to the ASIO question.>
ASIO can sometimes cause problems like this. Did you try it using MME?
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2005
Posts: 69
Enthusiast
|
|
Enthusiast
Joined: Aug 2005
Posts: 69 |
I have been following this thread and I also have a Roland UA 700. I have been using it
with Vista 32 for several years without a problem. I switched to a Dell XPS laptop
with Win 7 x 64 and have been using a Soundblaster Express card.
This morning I hooked up the UA 700 to my laptop and downloaded the W7x64 driver and started up BIAB and it played with no problem. I opened Real Band ( witch I never Use )
and made the selections in the preference file using MME and Hyper Canvas and played through two songs and exited the program and everything sounded great with no Error
reports.
I did not have any input devices chosen and maybe that can be the problem you are having. I have had ASIO problems before using a Guitar synth. and Vista but haven't
tried it with W7x64.
Hope that this helps. Dave.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hello Jazz,
thanks for your reply. Yes, I also tried to use MME but got also the violation/termination error then.
greetings,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hello Dave, Thanks for your reply. I also tried to use RB without choosing an input but I still got the Access Violation error then. Interesting to hear you can work well with the UA-700 on your PC. Mine is an HP Pavillion Intel-I3 with 6 Gb of RAM and Windows 7 64 bits. I still wonder how the file format just can change by itself from Int32LSB to Int16MSB in the ASIO Driver Dialog info after the error occurred. Is there perhaps another resident program which may cause troubles on the PC? I can work fine with both Sonar VS and Sonar CakeWalk Homestudio 7 XL but get termination errors and troubles when starting BIAB and RealBand. Does Int16 perhaps refer to a 16 bit ancient program or driver? I have tried everything I could think of by now to solve this problem. I still cant work with RB  Even switching to another soundcard doesnt solve the problem. An input device is not likely to cause the access violation error. I hope someone knows more about the file format/sample rate issue. How it can change by itself or how its changed by something in the system? greetings, Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Dave,
Could you please check something with the UA-700. After launching RealBand just go to the [Midi Drv] Dialog so it opens. Then close it (you can just use Cancel without making any changes. Then re-open and re-close the [Midi Drv] dialog again. After that I get an Access Violation error (no matter if i click OK or Cancel). Can you check what happens on your system when triggering these events?
Thanks in advance for your help and greetings,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Valentino--
Have you tried disabling Windows Sounds?
Windows Sounds are 48KHz.
There may be an issue whereas Windows calls the card and changes its settings...
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hello Mac,
I have tried disabling the Onboard Audio on the motherboard in the BIOS but that didnt help. But what is exactly the 'windows sound' ?
My Windows Mixer shows for Playing :
====================================
> RealTek Digital Output
> 1-2 VS-100 (the Sonar VS-100 default)
> 3-4 VS-100
> 5-6 VS-100
> Headphones(RealTek High Definition Audio)
My Windows Mixer shows for Recording :
======================================
> Microphone (RealTek High Definition, Not Connected) *
> Line-In (RealTek High Definition, Not Connected) *
> Stereo Mix ((RealTek High Definition Audio, Ready)
> 1-2 VS-100 (standard communication device)
> 3-4 VS-100, Ready
> 5-6 VS-100, Ready
> DIGITAL VS-100, Ready
> MAIN VS-100, Default Device
(* I disabled the Audio on my Logitech webcam and also the Audio part of my ATI Graphics card)
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Windows Sounds are all those goofy wav files that the operating system plays.
Control Panel -> Sounds and set 'em all to none (might be different in vista or win7)
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2008
Posts: 461
Journeyman
|
|
Journeyman
Joined: Jun 2008
Posts: 461 |
Quote:
Hello Mac,
I have tried disabling the Onboard Audio on the motherboard in the BIOS but that didnt help. But what is exactly the 'windows sound' ?
To Disable Windows sounds on Win7
Right click on desktop
Select Personalize
Select Sounds at bottom of screen
Select Sounds Tab and then select none from the drop down menu under Sounds. You can also disable Play windows startup sound from here. You can also do this from the control panel under Apperance and Personlization.
Brian
BIAB 2024 Ultrapack- Studio One Pro 6.5 Windows 10
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Thanks for pitchin' in, Brian.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hello Brian and Mac,
I checked this on my system but under tab [Sounds] the Sounds are already set to {none} and the settings are disabled!
So obviously windows system sounds are also not the issue here then?
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
ok guys,
I tried the following :
I switched off onboard audio again. Then i switched off all devices under the Windows Mixer Play/Record except those of the VS-100.
Then I removed all .ini files of both Band In a Box and RealBand and rebooted the system.
I started RealBand and after closing the [Midi Drv dialog] twice I got a termination error again.
Now when I started SONAR after this it reported no audio drivers on the system anymore! The driver dialog was all empty. I had to reboot my PC to get them back.
Does anyone of you still have an idea where to look at now?
Thanks in advance,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
This is really beginning to sound like a problem with the device's drivers.
Not sure if you've done this already, but a visit to the mfr's website, support pages and looking for other drivers for your operating system is what I'd be doing.
If there are *any* other drivers published for the device, worth a try to download, install and see if they perform.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2004
Posts: 76
Enthusiast
|
|
OP
Enthusiast
Joined: Jan 2004
Posts: 76 |
Hi Mac,
Thanks again for your reply. Im already using the latest (2010) Roland driver 2.0 64 bits for my new VS-100 Audio Device. As said I switched off all other drivers reported by the system including Onboard Audio which didnt help. I also tried to install a Generic Text Only Printer set as Default above my HP Printer to see if this could help but it didnt (was a hint I saw somewhere on the net). I also updated my ATI Graphics driver card to the latest version at the HP support site. As far as I can see now there are no other drivers to update, and besides that, all other drivers beside VS-100 are switched off anyway?
greetings,
Valentino
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 21,631
Veteran
|
|
Veteran
Joined: May 2000
Posts: 21,631 |
I believe Mac is suggesting trying older drivers if available.
Sometimes newest is not equal to best.
Make your sound your own!
.. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Like I said, if *any* other drivers for my OS are available from the mfr's website, I would try them...
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update Your PowerTracks Pro Audio 2024 Today!
The Newest RealBand 2024 Update is Here!
The newest RealBand 2024 Build 5 update is now available!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245
The Band-in-a-Box® Flash Drive Backup Option
Today (April 5) is National Flash Drive Day!
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
Learn more about this free update for Band-in-a-Box® 2024 for Windows at www.pgmusic.com/support_windowsupdates.htm#1111
Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!
If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
Convenient Ways to Listen to Band-in-a-Box® Songs Created by Program Users!
The User Showcase Forum is an excellent place to share your Band-in-a-Box® songs and listen to songs other program users are creating!
There are other places you can listen to these songs too! Visit our User Showcase page to sort by genre, artist (forum name), song title, and date - each listing will direct you to the forum post for that song.
If you'd rather listen to these songs in one place, head to our Band-in-a-Box® Radio, where you'll have the option to select the genre playlist for your listening pleasure. This page has SoundCloud built in, so it won't redirect you. We've also added the link to the Artists SoundCloud page here, and a link to their forum post.
We hope you find some inspiration from this amazing collection of User Showcase Songs!
Congratulations to the 2023 User Showcase Award Winners!
We've just announced the 2023 User Showcase Award Winners!
There are 45 winners, each receiving a Band-in-a-Box 2024 UltraPAK! Read the official announcement to see if you've won.
Our User Showcase Forum receives more than 50 posts per day, with people sharing their Band-in-a-Box songs and providing feedback for other songs posted.
Thank you to everyone who has contributed!
|
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,585
Posts734,719
Members38,500
| |
Most Online2,537
Jan 19th, 2020
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean