To "arm" Realband Track click anywhere in the Gray Title box for the track and it will turn red.

My Preference settings for my UX-1 in Realband (Control+F1 or Options>Preferences>Audio tab)are:
Audio File Type: 44.116
Audio Driver: MME
Input Channel for Mono Tracks: L+R (2 Tracks)

Output Buffer: 2000
Track Buffer Size 65536
Input Buffer (MME only) 1

Checked boxes:
Full Duplex, Advanced Midi, Realtime Effects, Always record Audiotoo, Backup most recent audio take.

Drivers Button:
Audio Input: Micosoft Sound Mapper,SB Audiology (C8C0), Line 6 TonePort UX1
Audio Output:Micosoft Sound Mapper,SB Audiology (C8C0), Line 6 TonePort UX1

Click red Audio Record button when recording (as stated earlier)

If your VU meters also do not register a signal but when played back the audio is there on 3 tracks Titled: Audio Port 1, Audio Port 2 and Audio Port 3 but only Audio Port 3 has the stereo wave signal on it then go to your Computers Control Panel and set your TonePort UX1 as the Default Sound Recording device .

Then your VU meter should register and you will get Audio on Tracks Port 1 and 2 and a blank on Port 3.

Double Clicking on the "Audio Port 1" area allows you to give the track a name (Guitar 1, Flute 2 etc) if you want.


I'm running Win XP and the latest BIAB/Realband update and in the Computers Control Panel Settings>Audio Sounds and Devices>Audio tab I have:
Sound Playback:Line 6 Toneport UX1
Sound Recording: Line 6 Toneport UX1
Midi Playback:SB Audiology (C8C0)

Good luck,
Carkins