I am a newby with TriplePlay, but It shows that the midi signals are working properly. With BIAB 2016 when I select the midi option it shows the TriplePlay driver as a midi input. I select that. But it doesn't show it is receiving the input from my guitar.
I still am not sure I can record midi into BIAB. If so, how do I get the signal received by BIAB? I am using the midi in TriplePlay driver.
Hi Chet. Welcome to the forum. I don't have Triple Play (I wish!) but do have a few thoughts.
Some guitar midi controllers output on one channel. Some controllers output on multiple channels, either 1 to 6 others output on channels 11 to 16. Which way does your Fishman Triple Play output?
Another question, have you looked at the BiaB midi settings at Options > Preferences (CNTRL E) > MIDI OPTIONS? (see photo below) Does the channel the Fishman is transmitting on match the channel the track is receiving?
Have you used midi monitor (Window > MIDI MONITOR) to see what is happening in real time?
Last edited by Jim Fogle; 04/05/1703:27 PM. Reason: Add 2nd Photo
Yes with FTP it is not obvious (nor is recording INTO BIAB, better to use Real Band or some other DAW for recording but enough on that dead horse). There are at least two ways to skin this cat one less painful then the other (depending).
Let’s start with some basics
MONO = each string is output on it’s on MIDI channel starting at MIDI channel 1 for low E string up to 6 for high E string – and these MONO channels are NOT chainable inside FTP software (they can be remapped elsewhere)
POLY = ALL six strings are output on MIDI Channel 1, this is the DEFAULT FTP and again unchangeable in FTP SW.
Before we begin let’s start with no memory or other possible conflicts so first reboot PC.
1. Simple way with BIAB:
a. Let’s assume you are using DEFAULT BIAB MIDI channels for Melody track (MIDI ch = 4) , Soloist Track (MID ch = 8) and Thru track (MIDI ch = 5)
b. Now plug in FTP USB receiver, and then turn on guitar output DO NOT BRING UP the Fishman Triple Play Software (we’ll do that later).
c. Next Open BIAB and simply select the “ Fishman Triple Play” as a MIDI input for BIAB. If you see ANYTHING else there labeled “Fishman” this or that or MIDI2 FISHMAN, IGNORE IT as the MIDI input for BIAB
NOW when you have a song ready and you want to record hit the record button and remember where you told BIAB to record to the Melody track or the Soloist track and start record get the 4 beat count-in and start playing along. When done hit stop and your recorded MIDI data will be in BIAB on channel 4 (if you selected the Melody track, or channel 8 if you selected the Soloist track
While recording, you will hear whatever is set as an instrument on the BIAB THRU track (ch=5). However, when you play back song you will NOT hear anything on THRU track, since you didn’t actually record any MIDI channel 5 data in BIAB.
That confusing situation and the inability to edit MIDI data and separate it into different tracks is why I DO NOT RECORD into BIAB. A DAW is your "MIDI guitar friend."
2. Simple way using Real Band
DO step 1b above, then bring up Real Band, and again select as your MIDI input device “Fishman Triple Play” and again ignore anything else that says “Fishman” this or that.
Remember by default Fishman sends out MIDI DATA in POLY MODE (all strings assigned to one channel - that channel is ch 1.)
When you record in RB the incoming MIDI data is recorded into the channel it comes in on in FTP case that is (poly) MIDI ch 1.
But you can assign some other midi channel for that data to play on inside RB and with the event editor you can remap that data to some other channel. But remapping NOTES to separate strings so they can be assigned different MIDI channels (i.e., like it MIDI MONO) would be very tedious if not next to impossible: there is no way to know if an A3 is the fifth fret of the low E string (lest assume in this case ch 1) or the actual A string itself (say the next channel or ch 2.
There are ways to record FTP data as MONO (each string on separate MIDI channels) but you will need to use a “intermediate MIDI device” that is a software MIDI router like LoopBe or MIDI OX . You would bring up FTP Software and assign the hardware synth to that device (in attached 3rd picture that generic looking HW Synth device that is LoopBe’s 2nd MIDI I/O "port." (FTP SW open Options -> Preferences to set this MIDI output).
Then in the synth slot (4th picture double click and HOLD the synth button in your right hand mixer section to bring that up)
And the 5th pic shows you where to set MONO/POLY (you get that screen by simply double clicking the "Synth" button (which now says "Hardware Synth" in you right hand mixer section) .
Now you can use LoopBe’s 2nd MIDI IN (seen as a generic “02. Internal MIDI” in your input devices) as you MIDI input to your DAW. NOW in your DAW you need to separate out you channels and tracks
Make sure you read FTP user manual about MONO and POLY (pg. 16) and using FTP as a PLUG IN (pg 26) vice using it as described here.
good luck Larry
Last edited by Larry Kehl; 04/06/1711:42 AM. Reason: typos, clarifications and typical dsylxeica corrections
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
I consider Larry to be this forum's Fishman TriplePlay expert. He has the TriplePlay so I feel very confident in acknowledging you have received the BEST answer you will receive.
Larry,
After Chet has asked any follow up questions he may have regarding your response, may I suggest you incorporate your clarification response into your original response and then post your response both here and as a separate post in the Tips & Tricks section of the forum.
Thank you very much for your reply. I understand what you wrote. I've contacted TriplePlay and I am waiting for a response. I will share it with you when they respond.
I owe an apology. Larry I didn't see your post when I responded. I am truly sorry about that. Thank you so much for the effort you put into explaining the process to me and others I am sure.
I am printing everything off and starting the process of following your instructions. I don't know how I missed it. I didn't get notified. I need to check my profile. Again, thank you so much
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.