Log in to post
|
Print Thread |
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
I purchased a Rode NT1 from Amazon in March and I've been recording with it without issues since. However a few days ago, after using it no differently than usual (mainly voice recording), it suddenly started malfunctioning and producing a strong popping noise, all while failing to record anything properly. If I unplug it and store it away for some time, and then plug it back in, it stops making noise, but then the issue comes back after 10-15 minutes. Does anyone have any idea what the problem might be? Here's an audio sample: https://soundcloud.com/valerio-ray/mic-noiseIf the problem persists, I'll try contacting RØDE directly. Thanks in advance.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Aug 2011
Posts: 10,149
Veteran
|
Veteran
Joined: Aug 2011
Posts: 10,149 |
Have you tried the microphone with a different cable? Try a different channel (if one is available) on your audio interface.
It will not hurt to contact Rode support to alert them to the potential issue however trying the suggestions above can eliminate other possibilities like the cable or audio interface.
Jim Fogle - 2024 BiaB (1111) RB (5) Ultra+ PAK DAWs: Cakewalk by BandLab (CbB) - Standalone: Zoom MRS-8 Laptop: i3 Win 10, 8GB ram 500GB HDD Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD Music at: https://fogle622.wix.com/fogle622-audio-home
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
I've tried two different cables on all available channels (might worth mentioning that I'm plugging the microphone into a Yamaha MG10XU) and the issue continues to persist.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I've tried two different cables on all available channels (might worth mentioning that I'm plugging the microphone into a Yamaha MG10XU) and the issue continues to persist. Are you familiar with Gain Staging? Sounds like you are not staging correctly. Regards, Bob
Last edited by 90 dB; 09/23/17 08:33 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
I've tried two different cables on all available channels (might worth mentioning that I'm plugging the microphone into a Yamaha MG10XU) and the issue continues to persist. Are you familiar with Gain Staging? Sounds like you are mot staging correctly. Regards, Bob Can you clarify what you mean by that a bit more specifically? The problem occurs at all levels of gain.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I've tried two different cables on all available channels (might worth mentioning that I'm plugging the microphone into a Yamaha MG10XU) and the issue continues to persist. Are you familiar with Gain Staging? Sounds like you are mot staging correctly. Regards, Bob Can you clarify what you mean by that a bit more specifically? The problem occurs at all levels of gain. https://www.soundonsound.com/techniques/gain-staging-your-daw-software
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 25,943
Veteran
|
Veteran
Joined: Jul 2000
Posts: 25,943 |
Bad capacitor?
Do you have a good source of a full 48 volts?
The NT1 is an old model, replaced by the NT1a. My NT1 is about 20 years old.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
I've tried two different cables on all available channels (might worth mentioning that I'm plugging the microphone into a Yamaha MG10XU) and the issue continues to persist. Are you familiar with Gain Staging? Sounds like you are mot staging correctly. Regards, Bob Can you clarify what you mean by that a bit more specifically? The problem occurs at all levels of gain. https://www.soundonsound.com/techniques/gain-staging-your-daw-software I was reading that article before, but again, not only does it also happen outside of my software (I can see it peaking on the mixer and hear it too), it doesn't seem to be related to gain at all, unless I completely mute the microphone, I can hear it produce that intermittent sound and peak through 0dB. Bad capacitor?
Do you have a good source of a full 48 volts?
The NT1 is an old model, replaced by the NT1a. My NT1 is about 20 years old. I believe I have the "new" 2014 version of the NT1, sold with the shock mount and pop filter.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 25,943
Veteran
|
Veteran
Joined: Jul 2000
Posts: 25,943 |
Ok, although the Rode website specifically has a warning about Amazon selling counterfeit Rode mics.
How about the source of the 48 volts? I recall Rode really needs the full voltage, whereas most other condensers can get by with much lower voltage.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
"I was reading that article before, but again, not only does it also happen outside of my software (I can see it peaking on the mixer and hear it too), it doesn't seem to be related to gain at all, unless I completely mute the microphone, I can hear it produce that intermittent sound and peak through 0dB."
You can see it on your meters and hear it through your phones but still not have signal at your input. That's why gain staging is so important.
How are you bringing the signal from the mixer into the software? USB or analog?
Regards,
Bob
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
Ok, although the Rode website specifically has a warning about Amazon selling counterfeit Rode mics.
How about the source of the 48 volts? I recall Rode really needs the full voltage, whereas most other condensers can get by with much lower voltage. Yamaha MG10XU "I was reading that article before, but again, not only does it also happen outside of my software (I can see it peaking on the mixer and hear it too), it doesn't seem to be related to gain at all, unless I completely mute the microphone, I can hear it produce that intermittent sound and peak through 0dB."
You can see it on your meters and hear it through your phones but still not have signal at your input. That's why gain staging is so important.
How are you bringing the signal from the mixer into the software? USB or analog?
Regards,
Bob USB, again I'd like to point out that the microphone has been working flawlessly for months, it just recently started doing this and I haven't changed anything in my setup.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
Could be a lemon of a microphone. It happens. Try Rode Customer Service.
Regards,
Bob
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
The description of the issue not being immediate and coming to fruition each time after 10-15 minutes, and then after being shut off leads to a thermal issue. Not saying it is for certain not gain stage, but typically gain stage is either there or not there, not something that comes on after some time.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2009
Posts: 9,406
Veteran
|
Veteran
Joined: Apr 2009
Posts: 9,406 |
The description of the issue not being immediate and coming to fruition each time after 10-15 minutes, and then after being shut off leads to a thermal issue. Not saying it is for certain not gain stage, but typically gain stage is either there or not there, not something that comes on after some time. yup. if you have a can of compressed air, like the stuff they sell to blow dust off of computer keyboards.... open the mic up and let it run until it starts making that noise. Locate the capacitors on the circuit board and while holding the spray can of air UPSIDE DOWN.... slowly squeeze the trigger to drip some of the liquid that comes out onto the caps, one at a time. feel free to do it to other components as well but start with the caps. If you have a thermal issue, the sound should stop when you cool the defective cap. don't get the liquid on you as it can cause frostbite by freezing your skin almost instantly. You can also contact Rode to see if the mic is real or a fake. If it's real, they should handle any warrantee work or replacement on it. If it's fake.....well, you might have to go back to the seller on Amazon and hope for the best.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: May 2015
Posts: 880
Expert
|
Expert
Joined: May 2015
Posts: 880 |
Have you tried the microphone with a different cable? Try a different channel (if one is available) on your audio interface.
It will not hurt to contact Rode support to alert them to the potential issue however trying the suggestions above can eliminate other possibilities like the cable or audio interface. Røde explicitly says on the front page that any Røde mics purchased through amazon will be covered due to the fact of fake ones being sold. As for the sound, it's either an issue with the xlr part of the mic, wind noise, or just analog noise.
Computer: Macbook Pro, 16 inch 2021 DAWs: Pro Tools, Logic, and Maschine plays drums, percussion, bass, steel pan, keyboard, music producer/engineer
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2013
Posts: 8,116
Veteran
|
Veteran
Joined: Apr 2013
Posts: 8,116 |
Valenter seems to have effectively eliminated the mixer, pre-amps, XLR connectors and cables from the signal chain. That leaves the mic.
Amazon states the NT1 has a 10 year warranty. I would use the warranty.
BIAB Ultra Pak+ 2024:RB 2024, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Feb 2017
Posts: 11
Newbie
|
OP
Newbie
Joined: Feb 2017
Posts: 11 |
Nothing but sending the microphone back to Rode for repair has worked unfortunately, thanks for the help anyway.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2017
Posts: 1,209
Expert
|
Expert
Joined: Apr 2017
Posts: 1,209 |
I had the exact same issue and was covered by RØDE’s 10 year warranty. These things happen. The replacement worked perfectly. Unfortunately, it was stolen in a burglary a few months after I got it back.
BIAB 2023 Audiophile, 24/60 Core M2 Mac Studio Ultra/8TB/192GB Sonoma, M1 MBAir, 2012 MBP Digital Performer 11, LogicPro Finale27.4, Dorico5, Encore5, SmartScorePro64, Notion6, Overture5
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2024 Italian for Windows is Here!
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Tutti Pacchetti | Nuove Caratteristiche
Band-in-a-Box® 2024 French for Windows is Here!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Tous Packages | Nouvelles Fonctionnalités
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a
If you like it, watch the video. Either way, let's hear your comments!
Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
Band-in-a-Box® 2024 German for Windows is Here!
Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Paket | Was ist Neu
Update Your PowerTracks Pro Audio 2024 Today!
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,921
Posts738,880
Members38,617
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|