But every time I open a new project, the default is always "Count-In" and since I rarely, if ever use that, I would like to have the default set as "No Count-In".
I know how to set it song by song (thanks for everyone who responded!)
And I know it's customizable by song.
My question is: the DEFAULT setting is for the "Count-In". How do I change the DEFAULT setting to "No Count-In"?
It's just a bit of an [*****]-ache to have to go back in each time to set it to "No Count-In" every time I start a new project. I do several projects a day so if I just have to go in each time to change it, then I will do that. Just hoping that there was an easy way to have it how it was before.
The rendered finished track STILL has 4-6 seconds of silence at the beginning of it.
So the count in is still there in the finished track. You just don't hear it.
Is there a setting that I need to adjust to remove that silence so the end result is that the finished track plays immediately with no silence or count-in?
Just tried it on about 10 different songs and the only time I had a wait period was when the song 1st generated. Every time I click play after that, the song starts for me immediately. If I generate a song, then freeze it, the playback starts immediately even if I click the regenerate button again.
OK. I tried it all 4 ways. Each way has 2 different settings you can set. One is the Options - Preferences - Count-In & Metronome Options AND Audio-Export Song As Audio File.
1st rendering settings: Count In Option (Default Count In with all boxes checked) and Render to Audio File (Include 2 bar lead-in and include drum lean-in checked)
The WAV file had a 4.351 second delay before the song started with the audible count-in as it should. This was the standard setting which you obviously do not want. Call this the control test.
2nd rendering settings: Count In Option (Default Count In with all boxes un-checked and Render to Audio File (Include 2 bar lead-in and Include drum lean-in)
The WAV file had a 4.351 second delay before the song started with no audible count-in. Still wound up with a 4.353 second silent period before the song started. Again, not what you are looking for.
3rd rendering settings: Count In Option (Default Count In with all boxes un-checked and Render to Audio File (Un-check Include 2 bar lead-in and uncheck Include drum lean-in)
The WAV file had a 4.351 second delay before the song started with no audible count-in. Still wound up with a 4.353 second silent period before the song started. Again, not what you are looking for.
4th rendering settings: Count In Option (Default Count In with all boxes checked and Render to Audio File (Un-check Include 2 bar lead-in and uncheck Include drum lean-in)
The WAV file had a 0.000 second delay before the song started with no audible count-in. This is what you are looking for.
You need to use the 4th rendering settings for it to work correctly when you render to a WAV file.
Set your count-in option to normal in the preferences but make sure when you render to audio file you un-check include drum lead in and un-check include 2 bar lead-in
If this works for you, you can mark the topic as Resolved.
As a follow up on my solution, the WAV file rendered was all of the tracks in a single WAV file. I also rendered the SGU file as each track as an individual file using rendering settings #4 and each track started immediately with no 4 second silent period. Same results in case you wanted separate tracks.
THANKS! Let me try it and see if it works...I really appreciate all the thought and knowledge everyone has shared with this.
I will definitely provide an update.
--------------------
UPDATE - okay - that way works. Not how I've exported .wav files. I've always used the .WAV button/tab on the main menu. But if I start exporting using this method, that does it.
TO EVERYONE - thank you for all your help and support!
Rendering is a different issue from getting the count-in stopped. You haven't said how your render the file. While there are a few ways in BIAB, only one of those ways (that I'm aware of, at least), allows rendering settings to be applied.
Once these setting are applied, then the other BIAB render options should give the same renderings.
Try this...
1. Open "Audio | Export Song as Audio File" (#1, #2 on image below)
2. Set the output audio format (#3)
3. I recommend using 16 bit and 44.1 kHz as sound output because Realtracks have these audio attributes. (#4)
This means that you won't run the risk of introducing audio artifacts by up-scaling/dithering to 24 bits (or higher) and higher than 44.1 kHz sampling frequency). I encourage you to play around with these settings and see what works for you. (I always use 16/44.1)
4. Set mix to "Normalize" (#5)
5. Deactivate the settings shown by #6. (I imagine that "2-bar lead-in" is active and that this is what's causing the silence.)
6. Activate "Render using the highest quality". (#7)
7. Click on "Render" (#8).
One your have made the changes in this window and then used the "Render" button (#8), the settings will be put in place. Next time, you can use any of BIAB's rendering options and these settings should be applied.
If ever you want to change these settings, it's necessary to use "Audio | Export song as Audio File" and then "Render" to set them.
Thanks to everyone for your suggestions. I have the same issue and it is not completely solved for me. It doesn't matter what I select in the "Render to Audio File" dialog. I unchecked "Include 2 bar lead-in" and also "Include drums lead-in" but I always get 2 measures silence at the beginning after exporting the audio file. The only possibility to avoid this silence is to go to Preferences => Count-in/Met. and activate "Allow Lead-In Bars (all songs)". Only with this setting in combination with unchecked "Include 2 bar lead-in" and "Include drums lead-in" in the export window, I can get rid of the silence at the beginning of the song. But that's exactly the thing: I don't want to activate "Allow Lead-In Bars (all songs)" in the preferences, because I want the song playback inside BiaB to start immediately after pressing play.
Maybe this is a new issue in BiaB 2021, because in the 2020 version I didn't have silence in exported files using the same settings.
1. ...and the audio count-in is set so that its heard when the song playback starts, then the song renders without the count-in.
If however...
2. ...the count-in is disabled so that it doesn't sound when a song is generated and played back in BIAB (as per the link below), then a 2-bar silence is inserted in the rendering.
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.