this might seem way way out there and odd but im wondering if a timeout condition is occurring viz casio and bb ie bb is waiting for data ..doesnt get it and thus stops. only pg will know in their coding if a stop condition can occur re the above. maybe midi lag is the issue with cas but not fp.
total!y blue skying it but if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ? so a lag condition doesnt occur ?
as a crazy experiment check if you have big buffers in bb settings ...check this...then see if reduceing the buffer size.helps. sometimes the silliest things can cause problems.
by the way...and i dont want to get into a big debate over this ..but if your useing pc on board sound chip...ive seen lots of issues helping folks over the years...would recommend a decent low latency asio audio nterface. maybe try out for a week to ensure it works great see rb forum and tips forum for good interfaces. a decent interface will let you set low buffers so you dont get latency which you mentioned up thread.
ps.do you have the net or background programs active while midi recording ? check in task mgr...ie other programs consuming pc resources ? also if you reply by saying but why does cas work with previous years bb versions and not 2024..? a possible answer is maybe 2024 places added demands on pc resources over previous years. but only pg can answer if 2024 consumes more resources.
if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ?
ANSWER: Actually I think it would be the opposite because the Roland is 15 years old and the Casio is brand new. The Casio could be too fast or transmitting too much data. Still doesn't quite go along with why Casio works with all earlier versions EXCEPT 2024.
i dont want to get into a big debate over this ..but if your using pc on board sound chip...ive seen lots of issues helping folks over the years...
ANSWER: I have a desktop and laptop. In one system I am using an external audio interface and the other the internal sound card - makes no difference.
Ok given your answers and all the ideas presented in this thread...and bear with me...but heres further thinking...
1..maybe pg can comment if 2024 is consuming more pc resources than preceeding years. if true then possibly other tasks on the pc in total with bb are leading to a resource issue and impacting bb ? check in task mgr eg is net running also ? if so try without the net.
2..now i know what your going to say which is an enigma...ie...BUT...fp works on bb 2024 ! and thats an excellent point....given your point that maybe cas is throwing out more data than fp maybe this in combo with the larger resource useage bb2024 in total is causeing this odd stop situation. ive seen lots of weird things over the years. it would be interesting to investigate how much data per sec is transmitted by cas over midi versus the fp. and get actual figures. in summary it might be just a pc resource issue. ie bb 2024 plus cas consumes more resources than bb2024 plus fp.. but i might be out to lunch on this. out of interest check out size of 2014 bb exe versus 2024 bb exe. ...there might be a clue there. ram useage ?
3..its totally unrelated but interestingly yonks ago i helped someone with a cas...he ended up getting another kbd.
heres a final thing thats bugging me...some people might say 'its gotta be a codeing bug in bb'...but if true why does fp work with 2024 ?
im gonna get a cuppa tea and do more thinking...lol.
ok something ive found. running 2024 on a basic song here tssk manager in win is reporting around 2 percent to about 5 percent cpu useage for bbw64 and around 460 mb of ram useage. which varies depending on default synth loaded. in the bb drive itself the exe for bbw64 seems to be around 56mb.. and bb 2024 32 bit is 44mb ? do you concur ?
L2L can you please tell me in 2024 64 bit running for fp connected what your above stats are in win task mgr ? now repeat for casio connected. any big differences in ram or cpu viz fp ? repeat above for 2024 32 bb. does cas work in bb 32 ?? now please repeat for your 2014 version bb. task mgr again. firstly fp then casio connected.. how much pc resources are being consumed ? cpu and ram.
addendum. i assume youve been running bb 64 thru all this. could you try with bb32 exe which comes with 2024 and use with casio connected... does the problem disappear ?
humour me..lol...i hate to be beaten the reasons for above are to assess the possibility of the pc running out of resources. what keeps on troubling me is fp works with 2024 which might lead one logically to conclude there isnt a bug in bb2024. btw as others have said andrew is v good people.
That was a great suggestion, but unfortunately, it did not solve the problem. I don't have to even be playing a single note repeatedly; it occurs (the MIDI recording stops in the middle of the song) when I am playing anything - not even just fast notes.
The MIDI clock rate I believe is 31.25kbits/second. Extrapolating that out, and presuming a start and stop bit are added to the 8-bit byte, this means that a byte transmits in about 320 microseconds, and with the normal MIDI message taking up three bytes, indicates that a complete message is transmitted in less than 1 millisecond (3 x 320 microseconds).
USB will transfer data at a significantly higher data rate again.
So I believe that your issue is not in any way related to the speed of your playing (unless you are exceeding 1000 note events / second ).
You mentioned that the BiaB Stop Recording message is displayed. That message would not normally come from the transmitted MIDI. It would come from within BiaB, usually from the Stop button being pressed on the transport.
Is this the stop message that you see?
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers. Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?
Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs? (Please make sure that no filters are affecting the displayed data)
Last edited by AudioTrack; 01/28/2402:36 PM.
BIAB & RB2024 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers. Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?
ANSWER: Not that I'm aware, but I am reaching out to Casio about this. There is an internal recorder on the Casio, but it is triggered by pushing an actual physical button that I can assure you is not being pushed.
Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs? (Please make sure that no filters are affecting the displayed data)
Attached is a screenshot of the last MIDI messages before the recording of MIDI stopped and the "Save Recording?" dialogue pop-up box.
Was "MIDI Recording Stops Suddenly And Randomly" ever sorted out after pages n pages of posts ?
No, the issue is still present with BIAB 2024 and I am still working on it with PG Support. We have determined that early versions of BIAB 2014 thru 2019 do not cause this issue. I'm still waiting to test some later versions.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
).![[Linked Image - Only viewable when logged in]](https://www.pgmusic.com/forums/ubbthreads.php?ubb=download&Number=27237&filename=2024-01-29_8-15-58.jpg)
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean