Log in to post
|
Print Thread |
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Rob,
I have finally started working on this. Today I simply just listened through the tracks one by one.
I hear a couple of issues with the raw tracks:
1. The Bass and Guitar tracks are simply dead above about 3 kHz. I can fix that to some extent.
2. The drums sound 'smeared'. Here is what probably happened. The RT is native at probably 20-30 BPM higher than what you used. This means that in order to use it at the BPM that you are using it, one of two things have to happen: The time stretch algorithm breaks up the track into very small chunks and stretches those chunks, sometimes by repeating them, so that they will map into the BPM of the song. 2. The RT has position markers for each dynamic event and these position markers are re-mapped into the slower BPM. This usually sounds better, but if there is a big difference in the BPM, then it will be distasteful because gaps form in the RT.
I think #1 happened with this track.
What is the RT's native BPM? WHat is the BPM of the song?
Bottom line - A different RT is going to be needed for the drums. A good portion of what I hear as 'mud' is this smeared drum sound. The snare simply doesn't have any snap any more. This can't be fixed with EQ. I have some country drum loops that might be usable but I need to know the precise BPM of the song in order to try them out.
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 21,636
Veteran
|
Veteran
Joined: May 2000
Posts: 21,636 |
ACW could give you that in less time than typing that reply! just sayin .. some features of PGProducts like the ACW are worth the price of admission by themselves
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Robb, you have a PM with a private link to my first cut.
On the vox, there were some resonances that I was able to manage with EQ. I would highly recommend that you get a parametric EQ plugin that you can audition live while looping different sections of the song. It's probably the room you are recording in.
If you want me to post the link here, let me know. I didn't do much 'arranging', that is, mimicing where you raised and lowered levels of tracks - just EQ'd bass, vocals, guitar, fiddle and mandolin.
All of those needed some EQ to make their own space in the mix. Others would probably EQ differently, but there were plenty of overlapping stuff that muddied up the mix. I also used some reverb and sent different tracks different amounts.
rharv, I assume you are referring to Auto Chord Wizard determining tempo, correct? I'd like to get the actual project BPM if possible, to avoid any potential error that could build up over the project length.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 21,636
Veteran
|
Veteran
Joined: May 2000
Posts: 21,636 |
ACW can be way more accurate then simple BPM, for the record. It allows you to adjust the tempo map into /thousandths of BPM if there is any variation at all (on any given measure).
Not uncommon to end up with a Tempo map showing tempos like 120.56764436 on one measure and 120.133644 on the next measure.
If you are looking for a simple rounded number it should be easy to tap the Tempo button and find it.
For fun I ran his song rollinon thru ACW Says it's about 126; example tempos inserted: 126.2148657834 (measure 8) 125.9175539825 (measure 9) 126.0495194541 (measure 10)
Last edited by rharv; 06/01/13 07:51 AM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
I am under an assumption that it is a simple interval for BPM. When I tried to tap tempo it, I got 125 (roughly) for a portion.
Unless the song was recorded free form, I would be very surprised to see a variance in BPM. The variances that you list above are small enough that I would count that as error for an auto tempo detect algorithm. (edit - or even variance from conversion to .mp3)
I'll try 126 and see how it rolls!
It probably doesn't matter in the end, I got a usable drum sound from the existing track with some judicious EQ and compression. The smeared snare sound is less prominent.
I'll wait for Robb's review of what I did so far.
Last edited by rockstar_not; 06/01/13 10:08 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 21,636
Veteran
|
Veteran
Joined: May 2000
Posts: 21,636 |
I am under an assumption that it is a simple interval for BPM It probably was indeed done at an even 126 originally. I only posted the results to show you how accurate you can get the ACW to be. Even if a song was done in free form, with the ACW you can set a tempo map that is pretty exacting. Then loops and realtracks/drums can follow it. I've seen free form recordings range from 97 to 102 within a few measures .. but I could still line up generated parts once the ACW wrote the tempo map. Just one of many tools in PGProducts that doesn't get enough notice/props.
Last edited by rharv; 06/01/13 01:04 PM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Nov 2010
Posts: 506
Journeyman
|
OP
Journeyman
Joined: Nov 2010
Posts: 506 |
Scott,
I sincerely thank you for your effort.
The original track was indeed recorded at a steady 126bpm. I can upload the BIAB file if it would be helpful.
I am having difficulty really listening to the new mix as the tracks are misaligned (I probably made some sort of error when exporting them). I will take the EQ settings you sent me via email and apply them to the original tracks and see how that works.
You are more than welcome to post the link and/or settings as you wish. It may prove to be educational to others. I will do the same.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Robb, if you want to re-export the .mp3 files for the whole song, each track individually, I should be able to slot them in for the tracks already sent.
Better yet - try the EQ stuff I mentioned first as to what I did in my version and see what it turns out like.
If you grab either of those parametric EQs and use the settings I sent to you, do some gentle panning, maybe some compression on the individual tracks, I'm guessing you'll be pleasantly surprised.
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Nov 2010
Posts: 506
Journeyman
|
OP
Journeyman
Joined: Nov 2010
Posts: 506 |
Sonar has a couple of built in parametrics. I am going to apply the EQ settings you suggested to the original mix. I'll post the results.
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Don't forget the panning in addition to EQ. Also I just surfed YouTube to see if I could see some of the parametric stuff in Sonar, and I ran across this (it's in ProTools, but the concept is just about exactly the process that I went through on your tracks) https://www.youtube.com/watch?v=qdDDVortvRU-Scott
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Nov 2010
Posts: 506
Journeyman
|
OP
Journeyman
Joined: Nov 2010
Posts: 506 |
I finally had time this weekend to get back to this song. Rollin' On EQ'd I applied the recommended settings with the following 2 exceptions: For the vox I applied a HPF @ ~150Hz with the slope set to HP Order of 12dB. To cut the BOOM of the kick I applied a HPF @100Hz also with the slope set to 12dB. Lead Vocal EQ settings: 1. Highpass filter set at 295 Hz followed by 2. Parametric EQ (shown) with two parametric filters active: a: frequency=342 Hz, -17 dB gain, Q=1.88 b: frequency=999Hz, -16 dB gain, Q=3.73
Electric Guitar EQ Settings: 1. Parametric EQ with two active parametric filters set: a. frequency=2846 Hz, gain=15.4 dB, Q=0.5 b. frequency=5809 Hz, gain=15.8 dB, Q=2.09
Fiddle AND Resonator Guitar EQ Settings: Parametric EQ with one filter active: Frequency=9146 Hz, Gain=11 dB, Q=0.5
Mandolin EQ Settings: Parametric EQ with two filters active: a. Low shelf filter Frequency=59 Hz, gain=-20 dB, Q=0.5 b. Frequency = 11884 Hz, Gain=20 dB, q=0.5
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
Band-in-a-Box® 2024 German for Windows is Here!
Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Paket | Was ist Neu
Update Your PowerTracks Pro Audio 2024 Today!
The Newest RealBand 2024 Update is Here!
The newest RealBand 2024 Build 5 update is now available!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
This free update is available to all RealBand 2024 users. To learn more about this update and download it, head to www.pgmusic.com/support.realband.htm#20245
The Band-in-a-Box® Flash Drive Backup Option
Today (April 5) is National Flash Drive Day!
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
Learn more about this free update for Band-in-a-Box® 2024 for Windows at www.pgmusic.com/support_windowsupdates.htm#1111
Band-in-a-Box® 2024 Review: 4.75 out of 5 Stars!
If you're looking for a in-depth review of the newest Band-in-a-Box® 2024 for Windows version, you'll definitely find it with Sound-Guy's latest review, Band-in-a-Box® 2024 for Windows Review: Incredible new capabilities to experiment, compose, arrange and mix songs.
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,637
Posts735,337
Members38,524
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|