I downloaded the ASIO driver and it's on the laptop ready for the next time I work on BiaB. I'll let you know if it works for getting rid of that message "Couldn't open wave device."
Big thanks to all on this forum. Your help and enthusiasm is quite wonderful.
John,
Thanks for posting the screenshot. It helps a lot.
Looking at your setup, the program should be running. Also, for what it's worth, BIAB is much friendly with MME than ASIO so it's likely that the ASIO drive might not solve the problem.
Try this as an experiment and see if it helps...
When you start up BIAB, rightclick on the startup icon and select "Run as administrator".
Also, when you installed the program, which option did you choose?
1) I thought you meant the "Start" icon for the Windows PC at bottom left of desktop. My bad!
2) I had opened BiaB and didn't see the "Run Administrator". So I right clicked on the BiaB start icon (with BiaB still closed) and NOW I SEE "Run Administrator". It asks if I want to make changes to the computer with BiaB.
Allow it to make changes... that's what running in Administrator mode is about. BIAB is safe to run in Admin mode.
The aim is to see if running in administrator mode makes a difference. PG Music recommend that BIAB should be run in this mode... it needs to be tested on your computer.
Once you have BIAB running in Administrator Mode, use the program exactly as you would normally and see if the problems still arise.
I just re-read this thread. I think we are running John unnecessarily through the wringer here.
I agree about Running BIAB as Administrator, which is recommended, cannot do harm, and in some cases is required.
The initial post describes symptoms of BIAB being flaky, but remember, it DID work once. That makes me think all this about drivers is taking us off target.
John, the first thing we do when BIAB was behaving fine but starts acting up, it to reboot the machine and restart BIAB. Obviously, you must have done this many times since your initial report.
The second thing we do is go to the Options menu and do Return to Factory Settings. You can save any custom settings as you do this.
Then close BIAB, reboot and restart. Report back.
If it still has the same problem, I would like to resume the discussion about the audio device. We still do not know what is being used.
If that doesn't pan out, then I'm thinking John should reinstall the program.
And there is always PG Music Support. They are superb. They can even remote-connect to your computer to help diagnose a problem. To get to them, click on the gray Support tab up above. Almost all of us in this forum are fellow users; we're pretty good, but not the ultimate resource.
BIAB 2024 Win Audiophile. Software: Studio One 6.5 Pro, Swam horns, Acoustica-7, Notion 6; Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus Studio 192, Presonus Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors
You might have taken care of the problem! I did "Run Administrator" in BiaB.
I've then tried a lot of changes and I haven't seen the message [“MESSAGE: Couldn't open wave device. The likely cause is another program is using the audio playback, or has left drivers open.”] come up at all. Not even once. That's good and I hope it stays that way.
A BIG THANK YOU!
I still have the other question about stopping a style change when playing (on the Chordsheet). My goal is simply to compare the styles for the song.
Here's what I do: 1) Open my song and play it (to listen to the style) / then I click stop. The song stops. 2) I go to Style Picker and select another style (listening in “Quick” mode – not chords of song) 3) When I find a style I like, I select it at “Play using current Chordsheet for song” 4) The chordsheet appears and plays the song using that newly chosen style. But it keeps playing.
QUESTION: How can I stop the song from playing without going to Task Manager?
None of the icons respond (including the STOP icon). The song plays to the end then starts all over again. This happens even with the “4 bar preview” [“Play using current Chordsheet for song”] selected at Style Picker”.
So far, I've only been able to stop the play by going to Task Manager, to End Process {T.M. only shows one process open for BiaB]. Otherwise it'll go on playing forever.
Your result for your second question is not normal behavior for that function. Something is amiss.
If you choose either the demo or the play over your chord chart button, the screen should not go back to the chord chart. (Number 4 on your list) It should remain on the Stylemaker page and either stop button should stop the playback. You can return to the chord chart page selecting either the OK or Cancel button. Back on the Chord chart page, you can change anything--- key, tempo instruments, chords, etc.
I recommend you reset the default settings.
Options/Return to Factory Settings and then restart the computer.
I reset the default settings and restarted the PC. Everything seems to work correct now. It's probably time to close out this post.
Thank you,
John
PS. There is a longtime BiaB forum member that lives just 20 minutes from me. He said he would be glad to meet with me and show me some BiaB tips & tricks.
Another possibility is to update your RealTek audio driver to the latest version. Be sure to download the appropriate driver for your operating system.
Choose the "High Definition Audio CODECs" link, accept the disclaimer and click "Next". Then select the appropriate driver to download.
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
Nope, because the RealTek doesn't have a native ASIO driver. However, I have successfully used ASIO4ALL with the RealTek on two different machines.
Also, if you happen to have purchased any Steinberg products, you get a generic low latency ASIO driver from them as well, which also works with the RealTek.
John
Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
A few excerpts:
"The Tracks view is possibly the single most powerful addition in 2024 and opens up a new way to edit and generate accompaniments. Combined with the new MultiPicker Library Window, it makes BIAB nearly perfect as an 'intelligent' composer/arranger program."
"MIDI SuperTracks partial generation showing six variations – each time the section is generated it can be instantly auditioned, re-generated or backed out to a previous generation – and you can do this with any track type. This is MAJOR! This takes musical experimentation and honing an arrangement to a new level, and faster than ever."
"Band in a Box continues to be an expansive musical tool-set for both novice and experienced musicians to experiment, compose, arrange and mix songs, as well as an extensive educational resource. It is huge, with hundreds of functions, more than any one person is likely to ever use. Yet, so is any DAW that I have used. BIAB can do some things that no DAW does, and this year BIAB has more DAW-like functions than ever."
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.