Quote:

So say I want piano on one track and bass on another.
1. set Juno to piano and record on track 1, channel 1 in PT
2. Go into PT and set the patch to piano
3. Select track 2
3. Go into performance mode on the Juino and edit/new patch to bass (whatever number that is) setting to modo channel 2
4. In performance mode, play bass and record on track 2, channel 2.
5. Go into PT and change patch on channel 2 to bass


Is this correct?

Thanks



I think you have it grasped somewhat.Make sure that the receive channel on the Juno for each part has been set to the appropriate channel of the track.Make sure after the track has been recorded that the channel number matches, EXample. If in the juno part one is set to channel 2 and you record the bass track make sure that in Power Tracks that that bass track is also set to output on channel 2 and that you have assigned a bass patch as well.


John
ESI Gigaport HD+
Lenovo Turion II /4 Gig Ram/ Win7x64 be
15.6" Monitor
"The only Band is a Real Band"
www.wintertexaninfo.com/BANDS/JohnnyD.php