Hi Matti,

You are using a Hardware MIDI synth and that cannot do the "Direct Render" of its sounds because the sounds live outside of the domain of your host computer's CPU.

The CPU sends MIDI data outside of the PC to the Hardware Synth, the Synth makes the sounds using its internal CPU and then sends those sounds out of its Audio Outputs.

The way to obtain a .wav or other audio format file of a song that has your Hardware MIDI voices in it is to Record the performance from start to finish onto the available Audio track in BiaB. Of course, that means that the Audio L and R Line Outputs of the hardware synth must be connected to the Audio Line Inputs of your computer's sound device using properly shielded audio cables and the right adaptor plugs to fit at each end of the cables, plus your sound device's software Recording Mixer must be set to record from the Line Input. If you are also using RealDrums or a few Realtracks along with the MIDI, the soundcard's software recording mixer must be set to a "Stereo Mix" or "What U Hear" or some other manufactiurer's designation that allows the sound device to record both the Line Inputs and .wav outputs at the same time.

Automatic "Rendering" can only be done if one is using a DXi or VSTi software synthesizer plugin, where the sounds are inside the computer in the first place.


--Mac

PGmusic FAQs, Tutorials and Updates! click here

You must be Audiominds.
www.audiominds.com