My Zoom USB3 audio interface has a built in midi In and Out, but I have also used an old yamaha USB to midi In / Out cable with some success. I run midi cc and program changes from BIAB to my vocal effects and guitar effects. It works very well, but there is a learning curve. I add the midi cc and program changes to the empty and unused melody and soloist tracks in BIAB. I found I had problems sending midi data on two different channels from the same track in BIAB. So, if you use those tracks already, then, I'm not sure what to suggest. Others may do it better, but I have it working and it took a long time to figure it out. Eventually, I'll put a video up of how to do it. Just do a couple of key units at first and then add as necessary otherwise you'll loose your mind:-)


Last edited by lambada; 03/20/16 07:07 PM.
Windows 10 Home 20H2 Build 19042.487
BIAB 2021 (Build 818)
Intel(R) Core(TM), i3-4160, CPU @3.60 GHz RAM 16 GB, 64 Bit X64-based processor
Zoom UAC-2 (USB 3 interface-built in midi)
VoiceLive 3 Extreme, Sputnik Valve Condenser Mic