Hi all
Odd behaviour on thru track using higher banks from PAT files

As some of you will know I have been playing around with PAT files and VSTs
In the last few days .
Every thing is fine and I have successfully created ins and patch files as well as test some of the ones included with BIAB
All work as expected when selecting the higher banks fine ,

If you save your settings for a song file and change a track to use a higher bank patch then save your song when you reload all tracks are as you set them good so far
.
Now for the odd behaviour
But the thru track does not remember its higher bank and sets back to the default normal bank piano on reloading the song .

Also it will not remember the thru track upper banks between sessions and shut down and restart. But it does remember any patch change from the normal GM bank.

So to recap if I set the thru patch say to GM vibes voice 12 that is what I get at next start up.
But if I set it to a high bank patch at next start up I get voice 1 GM Acoustic piano
Even if I save the song
As I say I have tried various pat files supplied with BIAB where I have a suitable synth.
Is this normal for the through track, when using higher banks from a pat file.

Your thoughts on this would be most welcome
Best regards
Mike

BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/