Originally Posted By: Jim Fogle
Chris,

Assume the starting bar volume level is 90 and you want the volume level to be at 0 after four bars then you might start with a volume reduction of 23 numbers per bar. That means that if the solo ends on bar 16 then the fade begins on bar 17 with a numeric value of 23 and enter 23 again on bars 18, 19 and 20 (23 X 4 = 92). That is a linear fade but a linear fade may not suit what you need so you may need to adjust the number for each bar up or down to achieve the fade out you want.

Aha! Thank you VERY much - I didn't think of doing the gradual thing. I want to put little "bits" of the solo instrument at the end of most of the vocal lines, so just normal volume for a bar and then either a mute where needed or perhaps at the end of a verse before a chorus, a couple of bars then fading as the vocal begins again.

I'll play with putting two values - one into each of two bars, in an effort to get the lead instrument to fade nicely. That's a great idea - Thanks again.

Cheers
Chris

iMAC 27 - Twin screen
BiaB 2017 Pro