http://www.pcchips.com.tw/PCCWebSite/Pro...D=1&LanID=0

Is this you mobo? If so, you need to figure out how to navigate the BIOS setup menus. You seem to be confusing some specs for the IDE (Hard Drive s and other drives) with the FSB speeds, and I think the manual could help clarify things. Check out the manual download on the far right in the middle, below downloads. Leaving flashing to perverts, and consider returning your BIOS to factory defaults, which should be a setup menu option, and one that should be featured in the manual. Then try one thing at a time in your music making. Each application may prefer different drivers or settings. Set your first application up, produce your tracks, check them to be sure you got them. then restart and change the settings for whatever goes next - produce the next stuff, check it, save it - move on. restart and reconfigure for the third app., and produce that , check it save it, and you may be the next susan boyle or Paul Pott (sp?). ...

If this is you board it's much fresher than I thought and it can handle whatever you throw at it.

DrDuBose
"Gettin' a life."

music at
http://www.bandmix.com/drdubose