Thanks, c-fogle:

Okay, what I’m trying to do is loop an acoustic dobro, that has no pickups into my DAW using the 2 channel Audiobox and Studio One software.

Since the Audiobox already has 48v phantom power and accepts both xlr or ¼ in plugs, I don’t think I would need the DI box with phantom power.

it seems I could just go into the Audiobox in-jack like always with the m7 mic then out of the left and right ¼ main jacks in the back of the Audiobox that now go to my studio monitors, route those instead to the two ¼” in-jacks on the Ditto X2 and just monitor the recording with headphones.

The Ditto looper is the last pedal in my pedal chain before going into the Audiobox, so all my FX pedals would be there, or I could just use the onboard FX plugins in the S1 arsenal. I realize this would not be stereo, but mono is fine for now.

Would I still need to split the wet signal into the looper, or would just using two cables from the main outs of the Audiobox to the two in-jacks of the looper work?

Thanks, again

Last edited by horahack; 08/30/15 06:28 PM.