|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Has anyone successfully used the LoopBe1 virtual midi cable program to send an extra midi signal to a synthesizer or harmonizer while using realtreacks and coyote in biab? I need help with settings. Midi/Audio driver setup recognizes that it is there and I have it set as midi in/ midi out. I have dxi checked (also tried without). I have biab setting for "vocalist" (ch5) and have set my vocalist pro to ch5 and "all" but no midi signal to the harmonizer so far. Any suggestions?  Mike
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2008
Posts: 791
PG Music Staff
|
|
PG Music Staff
Joined: Mar 2008
Posts: 791 |
The LoopBe1 driver should not be selected for both In and Out. This will cause MIDI feedback. I believe it has a fail-safe that mutes the driver if it detects MIDI feedback, so that could be what is going on.
If you are using the driver for output, then you need another program to use it as input. For example, PowerTracks or RealBand could receive MIDI signals and play out through a DXi synth.
If the Vocalist is hardware, then the LoopBe1 driver would not be necessary. In that case their should be some kind of output driver available in the Band-in-a-Box MIDI output driver list.
Blake
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Thanks Blake, but that is my problem. BIAB does not support multiple midi and therefore when playing realtracks you can't use another piece of midi hardware like the vocalist. That's why if I want midi instruments playing along side my realtracks I have to use the dxi setting (coyote) and it will not send a separate midi signal out using this configuration.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I don't have LoopBe1 but I've used MIDI YOKE. It's a virtual cable as well.You can have up to 16 virtual cables. You need only one.So here's what you do assuming your soundcard is OK with it. It should be.
1. Use midi yoke 1 as your output driver in BIAB
2. In your host program use midiyoke as your input driver for as many tracks as you need.And assign the approprite channels for those tracks that coincide with the BIAB instrument channels
3. assign each of those tracks to a particular DXi/VSTi
4. Route the audio from those DXi/VSTi to your sound card.
5. In BIAB route the audio to your sound card.RTs & RDs
6. In BIAB go to :OPT./PREFS/output channel
7. In this screen check off "output chords" as set up it'll output basic chords on channel 5.
8. In the host again set a track to receive midiyoke 1 on channel 5
9. set this track to output to your hardware midi interface that is plugged into the midi in of your Vocalist
10. Make sure the Vocalist is set to receive the chord info on channel 5.
This is how I did it in the olden days. Hope this helps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
I'd get the midi out working first.
I clean out the soloist part.
I change the solo part to Midi ch 5
I set the output chords to Midi ch 5
You should just be able to plug a usb to midi cable into the computer, plug it into the harmonizer and it should work.
On my harmonizer there are presets numbered 1.1 to 9.9
If I embed using f5 at bar 1 a 32 it will set the harmonizer to 3.2 so you can change from one harmony to another on the fly.
I would the the above working, and set Midi out (No in yet) in Opts Prefs Midi Driver
I'd use all Realtracks and watch to see my box work on harmonies.
Once you get that working you can decide if you want to try going back in and using the Dxi, I have not tried that as I use a Ketron or My Jv1010.
I think one step at a time is best, like I said no midi plugged back in.
Once you get that to work I'd simply try clicking on the Dxi and see if the soloist track is still firing midi out on ch 5.
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 101
Apprentice
|
|
OP
Apprentice
Joined: May 2007
Posts: 101 |
Thanks guys, but still no joy. I'll try again tomorrow. BIAB does list my vocalist pro (usb) under midi outs, so if I choose that and not select dxi it will get me through tonight's gig with my midi harmony. I'll just have to stick with songs that only use real tracks (or take the time to change the midi options for the songs with both realtracks and midi).
I really appreciate you taking the time to help!
Mike
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
I'm responding to this old thread-wanting to use BIAB with midi tracks and an external harmonizer.
1. It seems 32 bit midi yoke won't support my 64 bit Iconnectivity MIO...which is a USB to midi converter and supplies the signal to the harmony machine. So I must look elsewhere
2. The choices are loopbe1 ..... or midiloop software by Tobias Erichsen
Anyone have experience with either for supplying multiple midi outs?
Thanks-
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,595
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,595 |
LoopBE works fine on 32-bit and 64-bit Windows; however, I would suggesting buying LoopBE30, which gives you up to 30 virtual MIDI in/out ports for $19.90.
I have used it with, for example, Noteworthy Composer (which doesn't support DXi or VSTi synths) by sending MIDI data out to LoopBe and then configuring a standalone synth to receive data from LoopBE.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2024/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
John-
One external midi channel is sufficient for me. But I have a question:
Since the BIAB "Route all DXI/VST" checkbox now doesn't make sense, will LoopBe offer synth options? In other words what will be the NEW order of midi routing, and how will that interface with BIAB?
Looking at the posts above, i believe "Silvertones" addressing of MidiYoke...will likely apply to LoopBE. You choose it as your output device, check "Route DXI/VST" to a Coyote, etc...... specify a midi channel in Output Chords...and let LoopBE assign that channel to my MIO - USB to Midi hardware converter.
I'll wait till you weigh in on this before the install, John. Thanks as usual for your giving and comprehensive attention.
Dan
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,595
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,595 |
I believe that is correct, but it's free and easily installed/uninstalled. Just give it a try and you should have your answer in about five minutes. And it doesn't hurt to have it installed. It just adds another MIDI port to your system.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2024/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Well...... LoopBe1 is installed but nothing is happening. I click on the tray icon or in Programs, and no midi or monitor window comes up..... just the mute screen. I would happily purchase the 8 port version if it does work. I'm now awaiting a response from the creator.....though a bit skeptical at the moment. And others online have recently expressed difficulty. We'll see
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
O.k. here's the story......LoopBe1 does NOT offer one additional port...it's ONLY one port, so useless for a second midi out in BIAB. I would install LoopBe30- there's a trial. But some user notes first, would be helpful- I don't want to open a midi can of worms. There's another thread about this on the forum. I'll look there.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2000
Posts: 12,595
Veteran
|
|
Veteran
Joined: Dec 2000
Posts: 12,595 |
That's why it's called LoopBe1, because it's only one port. LoopBE30 is up to 30 ports, but you decide how many you want installed (default is two).
I've had it on my computers for about a decade now and it has never caused problems and has always worked. The only thing to be careful of is to not inadvertently set up a MIDI feedback loop.
And you can just try the trial version. The trial version of LoopBe30 works for 60 minutes after its first use. After every reboot, it will work again for an additional 60 minutes. As I said in the previous post, it is also easily uninstalled if you don't want to use it.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2024/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2000
Posts: 2,476
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,476 |
First here is some reading that may help with what you are trying to do http://bandinabox.wikia.com/wiki/Accessing_Multiple_Midi_PortsSecond, I seem to have lost the bubble on this how many outputs that you want BIAB to eventuality feed, sounds like at LEAST two? If yes then you are correct Loopbe 1 BY ITSELF won't help, (see above) – and John already said that (but stand by). Also if yes, besides a multi-port driver you will ALSO need something like MIDI OX (you knew that right?) if trying to go DIRECT form BIAB OUT to your i Connectivity port. You COULD take BIAB OUTPUT via MIDI Yoke, Loopbe 1, or Loopbe 30 into ANOTHER DAW or standalone VSTi (that has with ability to send MIDI out) and THEN using that DAW/VSTI (as a patch bay) route its MIDI thru or OUT to your iConnectivity port. Yes I saw you already said MIDI Yoke didn't work (more later). I have and do USE BOTH MIDI Yoke and LoopBe 30, I have and do use MIDI Yoke with a 64-bit Yamaha USB MIDI for my Montage 7 and my Fishman Triple Play (installed using its 64 bit drivers) Like you and John said Loopbe30 has a trial, TRY IT - it won't hurt anything. Now about MIDI Yoke: I’m not doubting you have issues but MIDI Yoke SHOULD work fine with your iConnectivity so not sure why you are having issues?? Even if you know this I’ll mention for others who may not know . You need to route BIAB MIDI OUT to a MIDI Yoke port (#1, # 2, #3, … or #8) THEN use MIDI OX (or similar or another DAW) to connect that single MIDI Yoke port to the multiple MIDI IN’s your trying to drive. And if not using MIDI Ox you are using a a similar "software patch bay" or a DAW that can route MIDI ins to one or more MIDI outs And if having trouble installing MIDI Yoke in Win 10 https://www.youtube.com/watch?v=kORFzILrdmABTW the single Loopbe1 port would work just as well in conjunction with MIDI OX as a single port of MIDI Yoke =================== Next just me rambling A MIDI port is a MIDI port as far as the OS (or MIDI) is concerned. Again, I use MIDI YOKE/OX with the 64-bit "drivers" for Yamaha USB support for use to/from a Montage 7 while also using my Fishman Triple Play (and its 64-bit driver) to other VSTi's and DAWS for recording/playing and routing. The iConnectivty uses a "run of the mill" USB 2 interface (it is backward compatible to 1.1 and the whole thing peice of HW is backward compatible to Win XP SP3 - which is ONLY 32 bit) the iConnectivty MIDI input (if designed to MIDI spec) is listening for a handshake and data from ANY MIDI input source it cannot tell if the handshake and data at its "input" was generated using 32 software, 64 bit software, or another piece of dedicated MIDI hardware, which is independent of ANY OS The MIDI Protocol is only 8-bit; furthermore, MIDI data itself is only 7 bits since one bit is a STATUS bit (7 bits can represent 128 things) good luck Larry
Last edited by Larry Kehl; 02/12/18 09:06 AM.
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2015
Posts: 7,954
Veteran
|
|
Veteran
Joined: Feb 2015
Posts: 7,954 |
Thanks guys, but still no joy. I'll try again tomorrow. BIAB does list my vocalist pro (usb) under midi outs, so if I choose that and not select dxi it will get me through tonight's gig with my midi harmony. I'll just have to stick with songs that only use real tracks (or take the time to change the midi options for the songs with both realtracks and midi).
I really appreciate you taking the time to help!
Mike LoopMidi is better than LoopBe (LoopBe tends to mute itself), it's free and can set many ports. Is it the midi chords you want to send to vocal pro ? If so then in Options > Prefs > Output chords enable Chord Types Channel Ticks before 0 or early ? Write track to midi file. Save Midi > file on disk File > Import > Melody or Soloist from Midi file Import saved midi and same channel only Load midiOut into that track and set it to the usb hardware device or LoopBe or MidiLoop.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Larry-
You didn't ramble a bit, and gave me a most generous answer. Thanks so much. With a Windows 7 machine and a Yamaha 144 sound module, I never had an audio or midi issue. Also, Midi Ox/Yoke was my religion during a long, XP tenure. But things changed this weekend.
I suddenly got the whim to pull out my old Helicon Voice Live, and while many Ox/Yoke 64 bit postings seemed discouraging, I took the Ox plunge. But after installation....more posts made me second guess this, and I uninstalled Ox.
The moment of grief arrived after that uninstall, Larry....when BIAB suddenly would play nothing without a yellow error message that there is no Audio driver present in Windows. The message would disappear, and the program would then play. But how an OX uninstall could corrupt my Yamaha 144 audio driver was a mystery. Other audio apps gave the same message. So I tried to reinstall my Yamaha audio driver..... and that FAILED ...saying 'Please telephone the company' A system restore to the pre-OX state brought things back in line. But as the Chinese say, "Once bitten by a snake, for 10 years you're even afraid of a rope"
My second venture of this past weekend involved LoopBe, but emails to creator Daniel Schmidtt, failed to garner help. So in light of your vast knowledge on these specific subjects, I guess you're my guide on 64 bit BIAB midi.
If there is an Ox version other than the latest standard 896 KB version whose uninstall somehow corrupted my Yamaha audio driver, please point the way. And if Yoke and OX still work as efficiently ina 64 bit system as you claim, there's no need for LoopBe at all. Any insights would be helpful. Thanks again.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2000
Posts: 2,476
Veteran
|
|
Veteran
Joined: Jun 2000
Posts: 2,476 |
Don't know what to tell you. So try Pipeline's Loopmidi
I'll now ALSO try LoopMIDI just for grins(thanks Pipeline!) .
but as an FYI I am NOT running Win 10 version 1709 (aka fall creators edition) - so maybe....???
I'm still on last springs version (1703) and will SKIP 1709 completely (and may even skip next one version 1803 coming VERY soon to a PC near you) - depending on what the Win 10 Home users (AKA guinea pig's or uncompensated beta testers) report as issues.
Larry
Win10Pro,i9,64GB,2TBSSD+20TBHDDs,1080TI,BIAB'24,Scarlett18i8,Montage7,Fusion 8HD,QS8,Integra7,XV5080,QSR,SC-8850,SPLAT,FL21&others,Komp.14,IK suite&others, just a guitar player-AXE FX III &FM9T, FishmanTP, MIDIGuitar2, GK2/3'sw/GI20
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
Pipeline's method of just using Real Tracks is what I've been doing until a more viable solution materializes. Yes, ....I currently output chords to the IConnectivity MIO...my selected midi output driver that gives chord info to the Helicon Voice Live But this forces me to solely use Real Tracks. PG support says the idea of multiple MIDI drivers has been bandied about by the developers for years, but since the vast majority of users prefer Real Tracks exclusively, midi is a dinosaur.
Personally, I couldn't disagree more. From stride piano to cha cha backgrounds, I find that to this day,a mix of midi and Real....often provide the most satisfying tracks.
Perhaps someone will offer a safe, easy, and definitive workaround for achieving multiple MIDI outputs in BIAB.
And Pipeline, ....does LoopMidi actually work here without a need for midi ox to distribute the midi? If so, and if it integrates easily, please share a bit more about this. Hard to tell from your post if it actually achieves multiple MIDI without complication in BIAB. Thanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2005
Posts: 500
Journeyman
|
|
Journeyman
Joined: Apr 2005
Posts: 500 |
And just in csse the developers are listening, the fix for this issue seems simple..... Put 1 more entry into OUTPUT CHORDS.....a dropdown that reads
MIDI DRIVER FOR OUTPUT CHORDS
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2015
Posts: 7,954
Veteran
|
|
Veteran
Joined: Feb 2015
Posts: 7,954 |
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2024 Italian for Mac is Here!
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Tutti Pacchetti | Nuove Caratteristiche
Band-in-a-Box® 2024 German for Mac is Here!
Band-in-a-Box® 2024 für Mac Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK & 7, Xtra Styles PAK 17 & 18, und mehr!
Paket | Was ist Neu
Band-in-a-Box® 2024 French for Mac® is Here!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6 & 7, des Xtra Styles PAK 17 & 18, et bien plus encore!
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Mac!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Watch the XPro Styles PAK 7 Overview & Styles Demos video.
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Mac!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Watch the Xtra Styles PAK 18 Overview & Styles Demos video.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Windows!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Watch the Xtra Styles PAK 18 Overview & Styles Demos video.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Windows!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Watch the XPro Styles PAK 7 Overview & Styles Demos video.
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums65
Topics83,104
Posts753,672
Members38,996
| |
Most Online2,537
Jan 19th, 2020
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean