I've already created a finished MIDI and Audio tracks arrangements, and I want to add a lead guitar part based on the chord charts I have. I know I've done it before, but it was almost 10 yrs ago. Can anyone send me a link to that tutorial in ver. 2023.
Also, IN those tracks I want to see if I can recreate JUST the piano part just as I recorded it (albeit it sounds like the grace of Frankenstein played it), but something that sounds more realistic and graceful. So, I'm not looking for anything in the Style library. I've never seen this kind of exact feature, so I'm not sure if it even exist. Thanks Much, King Conga
Didn't address your 2nd question, which is, to my knowledge, not possible with BiaB. You CAN do manipulations of RTs with Melodyne, for example, but that's not the same. Think RT improvisation off of human-made tracks is the next frontier for AI and BiaB. Scary stuff, but thrilling.
DC Ron BiaB Audiophile Presonus Studio One StudioCat DAW dual screen Presonus Faderport 16 Too many guitars (is that a thing?)
Since I play guitar I will often just record my own tracks but there have been times where, for whatever reason...... couldn't get the right groove, wasn't in the mood to play, or just plain lazy...... I decided to let BB do the tracks.
The problem was that for a solo, there has to be a certain groove or feel to it that builds properly and quite often BB doesn't read my mind and throws out some wonky stuff right in the middle if the solo that just ruins it. So.... I understand there is now partial track regeneration capabilities so there's that, but I have never used it. There's also using Melodyne to simply fix an errant note or two, but the method I've used on a few occasions is to simply let BB generate a number of instances of the same track. Since it almost never duplicates what it did previously, it's a safe bet that all the tracks will be different in some way or another. By moving those tracks into a DAW and using volume envelopes, one can easily comp the tracks to get a more perfect, or at least acceptable, lead guitar track. The one example I can think of is where I used 5 generations of the same track to get a very workable solo. A piece from here, the next section from there, a snippit from that one, and the ending comes from those two..... Waa Laa, a cool lead.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
In western movies, there's often the plot; There's a new sheriff in town. For BIAB, the new theme is; There's new math in town.
In older versions of BIAB, the riff feature in BIAB and RealBand would generate seven riffs and after a few regenerations, duplicates might appear. In other words, riffs had a fairly low unique number of generations. As Herb (Guitarhacker) notes above, this is usually enough to get a solid and unique solo. The method he references to generate 3-5 tracks of the same soloist instrument and comping riffs from each is also a very good method to capture a quality performance.
But today's BIAB can generate riffs that blow by the limitations of manually making your own off the charts. Partial regeneration increased riff capability up to 40 and BIAB now has 24 tracks to generate a soloist instrument multiple times on multiple tracks for manual comping.
However, RealTrack Medley Maker, an old feature, has been upgraded from working on the original seven Legacy Tracks to include the 16 Utility Tracks so all 24 tracks can now access this feature. There's an notify message for the Audio Track and DrumsTrack that a RealTrack must be loaded rather than pre-recorded audio or RealDrums. It's a RealTracks feature so Medley Maker applies to all of the 24 Tracks that have a RealTrack assigned.
RealTrack Medley Maker is marketed for two applications, Thickening (using the same instrument multiple times on the same track) or create a Medley of different RealTrack instruments to play simultaneously or consecutively as programed. But for music generation, there are hacks to generate very complex and detailed arrangements that are edited and arranged by BIAB.
The math for using the full compliment of 24 channels to use all of the Medley Maker sub-tracks and have BIAB create a soloist, BIAB would access and generate these sub-track RealTracks 264 times in a single generation that could have volume auto-leveling and panning. The RealTrack Medley Maker has 8 pre-sets that can be set to play a Medley either consequently or simultaneously.
Using multiple Mixer Channels with different variations of RealTrack instruments, applying Partial regeneration and then arranging these tracks into a single, unique stereo or mono soloist Artist Performance Track would be a huge manual undertaking that would require hours to duplicate what a single render in BIAB would produce.
OK, this is the 1st chance I've had to work on this since making these posts. I just took a long break cuz I was really tired of this project. Anyhoo, I'll go ahead and embarrass myself and admit I have a bit of a thick skull. I've tried several ways of getting the chords from the 62-bar section I want the guitar lead to follow INTO BIAB. GEEZ! It was hard enough getting them OUT of Studio One. What's making it complicated is the fact that I'm not using just 1-2 chords/bar, but almost 1 per beat in the first 2 bars of the phrase. I tried importing the MIDI section from the orig into BIAB, that wasn't even close. I was trying to use the C7 Chord button (the 4th button under Tools) since that seemed to offer the option for inserting chords per beat. However, that's really tedious as well, and doesn't seem to work. It's just a 4 bar phrase that repeats itself about 12Xs, the rest of the tune is more conventional. Any suggestions? I'll be glad to send you whatever files you think would help, but I wasn't sure which you would ask for. Just let me know. KC
Sometimes the easiest way is just to type the chords into the song. It doesn't usually take that long, while the playing about trying to get chord symbols out-of/into software can be frustrating. Using the "K" shortcut can speed things along; copy and paste ditto. (details of both, p95 of the 2024 manual).
Jazz relative beginner, starting at a much older age than was helpful. Kawai MP6, Korg M50, Ui24R, Saffire Pro 40. AVL:MXE Linux; Windows 11; Win8.1: Scarletts BIAB2022 UltraPAK, Reaper, a bunch of stuff.
@Gordon makes a good point. Typing in the chords is probably quicker than trying to import them. And the shortcuts should help speed it up. No need to overthink it - give the typing method a try and see how it works out for you!
OK! You win. I tried importing an audio file using ACW. Why is it, with everything in life, theory always works better than real life. Anyhoo, the main reason I tried that instead of writing the chords in was when I tried that first, due to the fact that many of the chords fall on offbeats, and only last 1/2 beats, and the s'ware simply wouldn't play nice with that factor. I know there's several ways to get this done, so considering that fact, can you pls suggest the easiest BIAB method where I can write the chords in, even if it's the actual note events, then copy that 4-bar phrase about 12X's, then the rest is pretty standard fare. Tnx, KC
OK. I'm moving, but it's a SLOW, bumpy ride. I'm using the Pno Roll view inserting MIDI events. 1 of my issues is I can't figure out how to create an accidental (Bb - B). The other issue is my Pno is on Ch. 2, but the stinking BIAB keeps switching back to Ch. 1 on playback. How do I keep that from changing. I can't believe I have to go thru all of this, just to generate the gtr lead.
I HATE THIS STINKING PROGRAM! Problem #1.) I DON'T want BIAB to play ANY style, and I can't figure out how to make it SHUTUP and play MY audio file. ACW doesn't sync up correctly. 2.) MIDI Piano Roll doesn't allow me to create an accidental, and the tutorial doesn't cover that. NONE of the features used for entering chords (EXCEPT MAYBE the piano roll) comes even close to what I need.
1) Click inside style label area (Pop-up menu appears) 2) Remove check mark beside "Style is enabled" by clicking on the words. (This toggles between enabled and disabled). 3) When a style is disabled there is a "x" placed in front of the style label.
Thanks Jim. Sorry I flew off the handle. I just get REALLY frustrated sometimes when I just want to get something simple accomplished, and for the life of me, I can't do ANYTHING creative bcuz the technology doesn't cooperate. I'm SOO frustrated with BIAB, as a matter of fact, I have to move on to another project so I can at least be productive. For instance, I can't believe even PG Support can't even tell me how to insert an accidental into my score. I asked for a solution in P.R. view, but they said that was impossible. OK! So WHERE? And they hung up? KC
I HATE THIS STINKING PROGRAM! Problem #1.) I DON'T want BIAB to play ANY style, and I can't figure out how to make it SHUTUP and play MY audio file. ACW doesn't sync up correctly. 2.) MIDI Piano Roll doesn't allow me to create an accidental, and the tutorial doesn't cover that. NONE of the features used for entering chords (EXCEPT MAYBE the piano roll) comes even close to what I need.
You may find Realband much better of a fit for how you work .. I sure did.
It has a much more intuitive workflow for me .. to just generate a new section using whatever RealTrack instead of Styles, etc. BiaB has its benefits, but for my workflow and expectations on how things should work, RB is much more convenient. It came with your BiaB purchase, so don't throw the baby out with the bath water (so to speak), it may be worth a try It is much more like a familiar DAW interface than BiaB is.It does *most of what BiaB does, and some things better
Last edited by rharv; 02/22/2405:27 PM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
I believe you need to be in the Notation window to write accidentals. BiaB also has "intelligent accidentals" that are context sensitive to the chord names.
Press F1 to open the Help window, select the "Search" tab and the top three choices discuss accidentals and the Notation window.
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
The Bob Doyle Media YouTube channel is known for demonstrating how you can creatively incorporate AI into your projects - from your song projects to avatar building to face swapping, and more!
His latest video, Next-Level AI Music Editing with ACE Studio and Band-in-a-Box, he explains in detail how you can use the Melodist feature in Band-in-a-Box with ACE Studio. Follow along as he goes from "nothing" to "something" with his Band-in-a-Box MIDI Melodist track, using ACE Studio to turn it into a vocal track (or tracks, you'll see) by adding lyrics for those notes that will trigger some amazing AI vocals!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Add updated printing options, enhanced tracks settings, smoother use of MGU and SGU (BB files) within PowerTracks, and more with the latest PowerTracks Pro Audio 2024 update!
Download and install this to your RealBand 2024 for updated print options, streamlined loading and saving of .SGU & MGU (BB) files, and to add a number of program adjustments that address user-reported bugs and concerns.
Did you know... not only can you download your Band-in-a-Box® Pro, MegaPAK, or PlusPAK purchase - you can also choose to add a flash drive backup copy with the installation files for only $15? It even comes with a Band-in-a-Box® keychain!
For the larger Band-in-a-Box® packages (UltraPAK, UltraPAK+, Audiophile Edition), the hard drive backup copy is available for only $25. This will include a preinstalled and ready to use program, along with your installation files.
Backup copies are offered during the checkout process on our website.
Already purchased your e-delivery version, and now you wish you had a backup copy? It's not too late! If your purchase was for the current version of Band-in-a-Box®, you can still reach out to our team directly to place your backup copy order!
Note: the Band-in-a-Box® keychain is only included with flash drive backup copies, and cannot be purchased separately.
Handy flash drive tip: Always try plugging in a USB device the wrong way first? If your flash drive (or other USB plug) doesn't have a symbol to indicate which way is up, look for the side with a seam on the metal connector (it only has a line across one side) - that's the side that either faces down or to the left, depending on your port placement.
Update your Band-in-a-Box® 2024 for Windows® Today!
Update your Band-in-a-Box® 2024 for Windows for free with build 1111!
With this update, there's more control when saving images from the Print Preview window, we've added defaults to the MultiPicker for sorting and font size, updated printing options, updated RealTracks and other content, and addressed user-reported issues with the StylePicker, MIDI Soloists, key signature changes, and more!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.