I would use subgroup send (aux send) to send the signal to the soundcard, then you can pick which track to send to get recorded easily.

Keyboard line out to mixer
Pod line out to mixer
Computer line out to mixer

Then use the subgroup or aux send to send signal from the mixer to the computer
Aux send (or subgroup out) from mixer to Line In on computer.

That way you can 'hear' the keyboard, Pod and computer thru the mixer via the main out of mixer going to amp/speakers. And the other out (subgroup or aux) will send the signal you want to the computer to get recorded.

The MIDI connections would stay the same; the mixer only deals with the audio (actual sound) signals.

************************

MIDI out of computer to keyboard MIDI in.
MIDI in of computer to keyboard MIDI out.

Audio out (stereo out L & R) of keyboard to mixer channels 1 & 2
Audio out of Pod to Mixer channels 3 & 4
Audio out of computer to mixer channels 5 & 6

Aux (or subgroup) out of mixer to line in on computer.

Main out of mixer going to amp/speakers

That would be the connections needed.

Last edited by rharv; 03/14/11 07:22 PM.
Make your sound your own!
.. I do not work here, but the benefits are still awesome