I agree with Don (see that, my dancing bird friend, it DOES happen ever so occasionally...) the grounds connected via the wires should provide adequate protection along hose lines.

But I likely wouldn't just leave the SSD where it could flop around freely, just in case someone would move the machine or it gets knocked, etc.

I'd look for a flat surface that the cable could reach and ATTACH the SSD drive to that flat surface using a couple pieces of double-sided foam tape, or some of that stickon hook and loop "velcro" fastening stuff. That way, I wouldn't be leaving it open to the bad situation where the drive might flop around and short out things on the mobo, etc. causing $$$ damage to components.


--Mac

PGmusic FAQs, Tutorials and Updates! click here

You must be Audiominds.
www.audiominds.com