Log in to post
|
Print Thread |
|
|
|
|
RealBand
|
Joined: Apr 2016
Posts: 3
Newbie
|
OP
Newbie
Joined: Apr 2016
Posts: 3 |
I've been struggling with this problem for a while and have read a lot about it, but still can't solve it so maybe somebody can help...I'm sure it's a common problem - latency.
I am using a Focusrite Scarlett (Gen 1) 6i6 interface to record my guitar and voice tracks in RB, playing along with backing tracks I've created in BIAB and imported into RB 2014 (yes, I'm going to upgrade when the next version - 2019 - comes out). I use the RealBand styles, so they are all RealTracks, and thus become audio tracks, not midi, in RB, if I understand this correctly. I'm using a Toshiba Satellite laptop with an i7 processor and 8 Gb of ram.
The Focusrite has its own ASIO driver, and the buffer is set to 10ms (lower than that gives pops, clicks and drop-outs). I can directly monitor my singing/playing along with my backing tracks, via the headphone out on the Focusrite, and perceive zero latency. My mic and guitar are plugged directly into the Focusrite with no effects, so I am recording the dry signal.
The problem is that when I keep the take and listen to my recordings, both voice and guitar sound slightly late. I've tested this with regular songs and also by filling a track with metronome clicks and playing/singing a single note as exactly in time with what I am hearing as possible - not perfect, but I'm reasonable with timing. When I expand the waveforms I can see that my guitar is mostly about 7-8 ticks late. I'm not sure what ticks are really, but that's what the timeline clock seems to measure by default, so they'll do as a measure. My voice is slightly less late, maybe 4-5 ticks.
I can solve the problem by using the move/copy command to shift the tracks backwards by the right number of ticks, but that doesn't seem like a good solution. I've tried messing about with the audio preferences window in RB 2014, but there doesn't seem to be a permanent latency correction feature like there is in, say Audacity, where I have set it so that the track automatically shifts backwards by a given amount on keeping the take.
Does anyone have any suggestions?
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 21,659
Veteran
|
Veteran
Joined: May 2000
Posts: 21,659 |
I can solve the problem by using the move/copy command to shift the tracks backwards by the right number of ticks, ..
Is the number around 8/120 of a click? I have one system doing that and it is indeed irritating. Haven't figured out the solution yet, but we need one.
Last edited by rharv; 08/01/18 02:39 PM.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Nov 2008
Posts: 1,382
PG Music Staff
|
PG Music Staff
Joined: Nov 2008
Posts: 1,382 |
Hi Dai,
Am I correct in assuming that you're using an ASIO audio driver?
If you increase the driver's latency, do the tracks then come in later?
Thanks Kent PG Music
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
Veteran
Joined: May 2003
Posts: 8,021 |
Got to set the Focusrite to "direct input monitoring". If not already. You're listening to your voice and guitar through the program causing latency.
Last edited by silvertones; 08/01/18 04:45 AM.
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 21,659
Veteran
|
Veteran
Joined: May 2000
Posts: 21,659 |
For what it's worth, on the one system I mentioned above we routinely move recorded tracks 8/120 clicks toward the beginning (Using Cut/Close Gap).
So I have noticed this also, but only on one system .. however that one is using a Delta 1010 (not Focusrite), yet another system with the same 1010 doesn't do it. I have tinkered with offset and latency on that machine, but the 8 tick move just fixes it on that machine every time. So I gave up figgering out why and just made it a workflow there.
In my case, that particular machine is using MME. I've changed it to ASIO, but others kept changing it back to MME so I gave up and left it on MME.
Far as I know Focusrite units only work with their native ASIO drivers. Selecting MME wouldn't allow the Focusrite to be used at all.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
Veteran
Joined: May 2003
Posts: 8,021 |
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2016
Posts: 3
Newbie
|
OP
Newbie
Joined: Apr 2016
Posts: 3 |
Thanks for your suggestions, all... I've been traveling, so only just noticed that I had some replies. The answers to your questions are, that... I am indeed using the ASIO driver supplied by Focusrite... I think I have to, in fact. And I think the latency gets worse if I increase the buffer setting in it to above 10ms. Lower than 10ms causes clicks and dropouts. And yes, the latency seems to be about 8/120 ticks, so the suggestion of using the cut/close gap function as a matter of course might be just what I have to do... That's a good suggestion, but surely not all DAWS must suffer from this problem? How does pro equipment and software handle it? I am plugging my monitoring headphones into the HP out jacks on the Focusrite , which I think means that I am doing "direct input monitoring", doesn't it, as that is the whole purpose of these outputs. I'm hearing my backing tracks coming from RB, through these HPs and listening to my playing and singing along, and everything sounds in time. It's only when I listen to the take that I get the latency, so it seems to me that the latency has to come from the processing that takes place in laying the tracks down. Either in the Focusrite driver or from RB or maybe both? Am I right?
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 21,659
Veteran
|
Veteran
Joined: May 2000
Posts: 21,659 |
Could be the software or the computer itself. Personally I have to cut gap on one system but not on others. So I think it's more how the computer handles recording.
Make your sound your own! .. I do not work here, but the benefits are still awesome
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2018
Posts: 5
Newbie
|
Newbie
Joined: Aug 2018
Posts: 5 |
I have 2nd generation Focusrite 2i2. Upgrade from 1st gen. No more latency.
Also - could be your cpu right memory. U seem to have a narrow window between getting artifact and latency
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Apr 2016
Posts: 3
Newbie
|
OP
Newbie
Joined: Apr 2016
Posts: 3 |
That's interesting... my Focusrite is 1st Gen, and I just borrowed it from work, it's not my own, so maybe if I buy my own 2nd gen one it will be better. Thanks for the tip.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box User Video Tutorials!
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
It's always great to hear how other Band-in-a-Box® users create their songs, especially when they explain in detail what they're doing. Like Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite! There you'll find his ALL Band-in-a-Box Tutorials playlist with over 50 videos! His top-three most watched videos include "How to Get Started with Band-in-a-Box," "How I use the Audio Chord Wizard in Band-in-a-Box," and "How to Create An Effective Solo Using Band-in-a-Box" - however he touches on many other topics and also demonstrates his own Band-in-a-Box® songs in the Band-in-a-Box Created Songs playlist!
You're guaranteed to find some helpful videos when you visit Henry Clarke's channel!
Band-in-a-Box® 2024 Italian for Windows is Here!
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Tutti Pacchetti | Nuove Caratteristiche
Band-in-a-Box® 2024 French for Windows is Here!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Tous Packages | Nouvelles Fonctionnalités
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a
If you like it, watch the video. Either way, let's hear your comments!
Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
Band-in-a-Box® 2024 German for Windows is Here!
Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Paket | Was ist Neu
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,981
Posts739,586
Members38,629
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|