Hi Mick,

I'm not sure the below relates to Hypercanvas but I have Cakewalk TTS-1 and have been playing around with it. I've looked at Hypercanvas on the Roland website and TTS-1 looks very similar. I thought I'd post my "playing around" in case it's useful to you.

Is the master volume set all the way up? Also, have you tried the "Panic" button to see if that resets the VSTi? (See image below.)



I've also had a play around with the "System" option in the VSTi/TTS-1 window and have found that if the "Output" is not set to "1", I get no sound. This too might be worth checking. Below is a second image. I accessed this option via "System (TTS window) | Options (on the red pop-up)". I'm not sure if Hypercanvas has a similar set.



If the above still do not get results, the next thing that I'd try is going to the link I suggested in my previous post and resetting RB to factory settings (#56). By resetting, when you start RB, it will ask you to set up audio and midi options from scratch. It could be that some setting in some configuration file is not as it should be. (As mentioned above, though, if you go for the reset, save copies of the original files.)

Regards,
Noel